Whirlpool CG 601 HAC HOOD 60cm Autoclean Baffle Filter Kitchen Chimney User Manual

1. Introducció

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Whirlpool CG 601 HAC HOOD kitchen chimney. Please read these instructions carefully before using the appliance and retain them for future reference.

Figure 1: Whirlpool CG 601 HAC HOOD Kitchen Chimney

2. Informació de seguretat

Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions.

• Assegureu-vos que la font d'alimentació voltage coincideix amb la classificació indicada a l'aparell.
• Do not operate the chimney if the power cord or plug is damaged.
• Mantingueu els nens allunyats de l'aparell durant el funcionament i la neteja.
• No flamejar sota la campana extractora.
• Clean the baffle filters regularly to prevent grease buildup, which can be a fire hazard.
• Assegureu-vos que hi hagi una ventilació adequada a l'habitació quan la campana extractora s'utilitza simultàniament amb aparells de gas o altres aparells de combustible.
• La instal·lació ha de ser realitzada per un tècnic qualificat.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x Whirlpool CG 601 HAC HOOD Kitchen Chimney
• 1 x Manual d'usuari (aquest document)
• 1 x Targeta de garantia
• Installation accessories (screws, wall plugs, etc. - may vary)

4. Especificacions

5. Instal·lació

The Whirlpool CG 601 HAC HOOD is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and safety.

5.1 Llista de comprovació prèvia a la instal·lació

• Ensure the wall is strong enough to support the chimney's weight.
• Verify that the power outlet is within reach and meets voltage requisits.
• Confirm the availability of a proper ventilation duct for ducted operation.
• Maintain the recommended distance between the cooking surface and the chimney (refer to local regulations or product manual for exact measurements).

5.2 Mounting the Chimney

1. Mark the drilling points on the wall according to the provided mounting template.
2. Perforar forats i inserir taps de paret.
3. Fixeu el suport de muntatge a la paret.
4. Carefully lift and attach the chimney unit to the mounting bracket.
5. Connect the exhaust ducting to the chimney outlet and route it to the external vent. Ensure all connections are sealed to prevent air leakage.
6. Install the decorative chimney covers, if applicable.

Figure 2: Chimney installed in a kitchen

6. Funcionament

Your Whirlpool CG 601 HAC HOOD chimney features a touch control panel and gesture control for convenient operation.

6.1 Toqueu Tauler de control

The touch control panel allows direct access to all functions:

• Botó d'encesa: Turns the chimney on or off.
• Control de velocitat: Adjusts suction speed (Low, Medium, High).
• Botó de llum: Controls the LED lighting.
• Botó de neteja automàtica: Initiates the heat auto-clean cycle.

Figura 3: Panell de control tàctil

6.2 Gesture Control

Motion sensing technology enables hands-free operation:

• Wave Left to Right: Increases fan speed.
• Wave Right to Left: Decreases fan speed or turns off.

Figure 4: Gesture Control in action

6.3 Il·luminació LED

El LED integrat lamps provide illumination for your cooking area. Activate them using the light button on the control panel.

Figure 5: In-Built LED Lamp

7. Manteniment

Regular maintenance ensures optimal performance and longevity of your chimney.

7.1 Heat Auto Clean Technology

The Heat Auto Clean feature uses a heating element to melt and collect sticky oil particles from the internal components. To activate:

1. Press the 'Auto Clean' button on the control panel.
2. The chimney will run a cleaning cycle.
3. The collected oil will drain into the oil collector.

Figure 6: Heat Auto Clean Technology

7.2 Baffle Filter Cleaning

The stainless steel baffle filters are designed to separate grease from cooking fumes. They should be cleaned regularly, typically once a month depending on usage.

1. Turn off the chimney and disconnect it from the power supply.
2. Carefully remove the baffle filters by releasing their latches.
3. Wash the filters with warm water and a degreasing detergent. For stubborn grease, soak them for a while.
4. Esbandiu-les bé i deixeu-les assecar completament abans de tornar-les a instal·lar.

Figure 7: Stainless Steel Baffle Filter

7.3 Oil Collector

The built-in oil collector gathers the oil and residue from the auto-clean process. Empty and clean it regularly.

1. Ensure the chimney is off and cool.
2. Locate the oil collector tray, usually at the bottom of the chimney.
3. Lliscar amb cura la safata.
4. Dispose of the collected oil and wash the tray with warm soapy water.
5. Dry thoroughly and re-insert the tray.

Figure 8: Oil Collector

8. Solució De Problemes

Consulteu la taula següent per veure els problemes habituals i les seves solucions.

If the problem persists after attempting these solutions, please contact Whirlpool customer support.

9. Garantia i Suport

9.1 Informació de la garantia

Your Whirlpool CG 601 HAC HOOD kitchen chimney comes with a comprehensive warranty:

• Motor: 10 anys des de la data de compra.
• Comprehensive: 5 anys des de la data de compra.

Please retain your purchase invoice and warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions.

9.2 Atenció al client

For any queries, service requests, or further information, please contact Whirlpool customer support:

• Correu electrònic: helpdeskindia@whirlpool.com
• Número gratuït: 1800 208 1800
• Adreça del fabricant: Whirlpool of India Ltd. Plot No. A-4, MIDC Ranjangaon, Taluka Shirur, Dist: Pune, Maharashtra 412220, India.

Figure 9: Whirlpool Customer Care Information

10. Producte acabatview Vídeo

Mireu aquest vídeo per a una ullada ràpidaview of the Whirlpool CG 601 HAC HOOD kitchen chimney's features and benefits.