1. Introducció
Thank you for choosing the Aerocool Mirage 12 ARGB PC Fan. This manual provides detailed instructions for the installation, operation, and maintenance of your new fan. The Mirage 12 ARGB fan features an Infinity Mirror RGB design and is compatible with Addressable RGB motherboards for customizable lighting effects. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Informació de seguretat
- Ensure your computer system is powered off and disconnected from the main power supply before installation.
- Manipuleu els components amb cura per evitar danys.
- Do not attempt to modify the fan or its connectors.
- Mantenir fora de l'abast dels nens.
- Refer to your motherboard manual for specific ARGB header and fan header locations and voltage requisits.
3. Contingut del paquet
The Aerocool Mirage 12 ARGB PC Fan package includes the following items:
- 1 x Aerocool Mirage 12 ARGB PC Fan (120mm)
- Cargols de muntatge
Imatge 1: Frontal view of the Aerocool Mirage 12 ARGB PC Fan, showcasing its infinity mirror RGB lighting effect.
4. Guia d'instal·lació
4.1 Instal·lació física
- Identify the desired mounting location within your PC case (e.g., front, rear, top, bottom).
- Position the fan in the chosen location, ensuring proper airflow direction (typically, the side with the frame supports and sticker is the exhaust side).
- Secure the fan to the case using the provided mounting screws. Do not overtighten.
Imatge 2: Darrere view of the Aerocool Mirage 12 ARGB PC Fan, illustrating the fan blade structure and motor hub.
4.2 Connexió elèctrica
- Locate the 6-pin connector on the fan cable.
- Connect the 6-pin connector to a compatible Aerocool H66F RGB Control Hub (if available) or a similar Addressable RGB controller that supports 6-pin fan connections.
- If using an H66F RGB Control Hub, connect the hub to your motherboard's 4-pin PWM fan header for fan speed control and a 3-pin 5V Addressable RGB header for lighting control. Refer to the H66F hub manual for detailed instructions.
- Assegureu-vos que totes les connexions estiguin segures abans d'encendre el sistema.
Imatge 3: Primer pla view of the 6-pin connector, used for both power and ARGB signal transmission.
5. Funcionament
5.1 Control d'il·luminació ARGB
The Aerocool Mirage 12 ARGB fan's lighting can be controlled via a compatible Addressable RGB motherboard or an external ARGB controller (e.g., Aerocool H66F RGB Control Hub).
- Programari de la placa base: If connected to a 3-pin 5V ARGB header on your motherboard, use the motherboard's proprietary software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to customize lighting effects, colors, and patterns.
- Controlador extern: If connected to an external ARGB controller, refer to the controller's manual for instructions on how to adjust lighting settings.
5.2 Control de velocitat del ventilador
The fan speed is controlled via the 6-pin connector, which typically interfaces with a PWM-compatible fan header on your motherboard (often through a control hub like the H66F). You can adjust fan speeds through your motherboard's BIOS/UEFI settings or dedicated fan control software.
- Ensure your motherboard's 4-pin fan header is PWM compatible for optimal speed control.
- Adjust fan curves in your motherboard's BIOS/UEFI or operating system software to balance cooling performance and noise levels.
6. Manteniment
To ensure optimal performance and longevity of your Aerocool Mirage 12 ARGB PC Fan, periodic cleaning is recommended.
- Apagar: Always power off your computer and disconnect it from the power supply before cleaning.
- Eliminació de pols: Use compressed air or a soft, dry cloth to gently remove dust accumulation from the fan blades and frame.
- Eviteu líquids: Do not use liquid cleaners or immerse the fan in water.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no gira | Incorrect or loose power connection. Insufficient power. | Check the 6-pin connector and ensure it is securely connected to the control hub/motherboard. Verify power supply connections. |
| La il·luminació ARGB no funciona | Incorrect or loose ARGB connection. Incompatible ARGB header. Software issue. | Ensure the 6-pin connector is properly seated. Verify that your motherboard's ARGB header is 3-pin 5V (not 4-pin 12V RGB). Check motherboard ARGB software settings. |
| Fan speed not controllable | Non-PWM fan header. Incorrect BIOS settings. | Confirm your motherboard's fan header is PWM compatible. Adjust fan control settings in your motherboard's BIOS/UEFI. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | MIRAGE12 |
| Dimensions del producte | 4.72" de llargada x 4.72" d'amplada x 0.98" d'alçada (120 mm x 120 mm x 25 mm) |
| Tipus de connector d'alimentació | 6-pins |
| Voltage | 12 Volts |
| Wattage | 1.8 watts |
| Mètode de refrigeració | Ventilador |
| Dispositius compatibles | Escriptori |
| Nivell de soroll | 17.8 decibels |
| Material | Policarbonat |
| Velocitat de rotació màxima | 1300 RPM |
9. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial d'AeroCool. weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el comprovant de compra per a reclamacions de garantia.
AeroCool Official Weblloc: www.aerocool.io
