Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your ATUMTEK ATMS050 Universal TV Stand. Please read this manual thoroughly before installation to ensure correct setup and safe use of the product. This stand is designed to securely hold LCD and LED televisions ranging from 37 to 65 inches, with a maximum weight capacity of 40 kg (88 lbs).
Image: The ATUMTEK ATMS050 Universal TV Stand, showcasing its sleek design and sturdy construction.
Informació de seguretat
- Límit de pes: Do not exceed the maximum weight capacity of 40 kg (88 lbs). Overloading can result in serious injury or product damage.
- Mida del televisor: This stand is suitable for televisions between 37 and 65 inches. Ensure your TV falls within this range.
- Compatibilitat VESA: Verify your TV's VESA mounting pattern is compatible with the stand (200x100mm to 600x400mm).
- Superfície estable: Col·loqueu sempre el suport del televisor sobre una superfície plana, estable i anivellada per evitar que bolqui.
- Nens i animals de companyia: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand or TV.
- Instal·lació correcta: Follow all assembly instructions carefully. If you are unsure about any step, seek professional assistance.
- Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs.
Contingut del paquet
Before beginning assembly, please verify that all parts listed below are present and undamaged. All small parts are individually bagged and numbered for easy identification.
- A. Columna de suport principal
- B. Base de vidre temperat
- C. TV Mounting Brackets (2 pcs)
- D. Placa VESA
- E. Base Support Plate
- F. Anti-Slip Feet (4 pcs)
- G. Clips de gestió de cables
- H. Kit de maquinari (diversos cargols, volanderes, separadors per al muntatge del televisor i el muntatge del suport)
- I. Assembly Tools (Hex Key, Wrench)
Imatge: Detallada view of the stand's components, including the main column, base, and mounting brackets, along with features like cable management, non-slip feet, and safety lock mechanism.
Instruccions de muntatge
Assembly typically takes about 15 minutes. Two necessary tools are provided in the package. Follow these steps carefully:
- Attach Anti-Slip Feet to Base: Carefully place the tempered glass base (B) on a soft, clean surface. Attach the four anti-slip feet (F) to the designated spots on the underside of the glass base.
- Assemble Base Support Plate: Secure the base support plate (E) to the tempered glass base (B) using the provided screws and the hex key. Ensure it is centered and tightened securely.
- Attach Main Support Column: Connect the main support column (A) to the base support plate (E) using the appropriate screws. Ensure the column is upright and firmly attached.
- Install VESA Plate: Attach the VESA plate (D) to the top of the main support column (A) using the provided screws.
- Attach TV Mounting Brackets to TV: Identify the correct screws, washers, and spacers from the hardware kit (H) that fit your television's VESA mounting holes. Attach the two TV mounting brackets (C) to the back of your television. Ensure the brackets are level and securely fastened.
- Muntar el televisor al suport: Carefully lift your television and hook the TV mounting brackets (C) onto the VESA plate (D) on the stand. Ensure the TV is properly seated and engaged with the safety lock mechanism.
- Televisió segura: Use the safety screws or clips to secure the TV mounting brackets to the VESA plate, preventing accidental dislodgement.
- Gestió de cables: Route your TV cables through the hollow central column and secure them with the cable management clips (G) for a tidy appearance.
Image: Diagram illustrating VESA mounting patterns (200x100mm to 600x400mm) and overall dimensions of the stand, confirming compatibility for 37-65 inch TVs up to 40kg.
Instruccions de funcionament
Ajust d'alçada
The ATUMTEK ATMS050 TV stand offers multiple height adjustment levels to optimize your viewing experience. The TV mounting brackets can be positioned at 3 different height levels on the main support column. To adjust the height:
- Carefully remove the TV from the VESA plate.
- Adjust the position of the TV mounting brackets (C) on the VESA plate (D) to your desired height level.
- Re-mount the TV onto the stand, ensuring it is securely hooked and the safety lock is engaged.
Funció giratòria
The stand features a swivel mechanism allowing you to adjust the viewing angle. You can pivot your television up to 30 degrees to the left or right.
- Agafeu suaument els costats del televisor.
- Carefully rotate the TV to the desired left or right angle. The stand's pivot mechanism is designed for smooth movement.
Image: Illustration demonstrating the 30-degree swivel capability and the three available height adjustment levels for the TV mounting brackets.
Manteniment
- Neteja: Feu servir un drap suau i sec per netejar el suport. Per a marques difícils, netegeu lleugeramentamp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or solvents.
- Inspeccions: Periodically inspect all connections and screws to ensure they remain tight. Re-tighten if necessary.
- Cura del vidre: The tempered glass base is durable, but avoid dropping heavy objects on it or subjecting it to sharp impacts.
Resolució de problemes
- Issue: TV is not stable or wobbles.
- Solució:
- Assegureu-vos que tots els cargols de muntatge estiguin completament apretats.
- Verify the stand is placed on a flat, level, and stable surface.
- Check that the TV's weight and size are within the specified limits (max 40kg, 37-65 inches).
- Confirm the anti-slip feet are properly attached to the base.
- Issue: TV does not fit the mounting brackets.
- Solució:
- Check your TV's VESA mounting pattern. It must be between 200x100mm and 600x400mm.
- Ensure you are using the correct screws, washers, and spacers from the hardware kit for your specific TV model.
- Issue: Cables are messy.
- Solució:
- Utilize the integrated cable management system by routing cables through the hollow central column and securing them with the provided clips.
Especificacions
| Marca | ATUMTEK |
| Número de model | ATMS050 |
| Mides de TV compatibles | 37 - 65 polzades |
| Capacitat de càrrega màxima | 40 kg (88 lliures) |
| Compatibilitat VESA | 200x100mm a 600x400mm |
| Material | SPCC Steel, Tempered Glass |
| Tipus de moviment | Swivel (up to 30 degrees left/right) |
| Ajust d'alçada | 3 nivells |
| Dimensions de la base | 42cm x 28cm (16.5 x 11 inches) |
Garantia i Suport
ATUMTEK provides a 3 anys de garantia sense preocupacions against manufacturer defects for this product. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or any questions regarding your ATUMTEK ATMS050 Universal TV Stand, please contact ATUMTEK customer service. Refer to the product packaging or the official ATUMTEK weblloc web per obtenir la informació de contacte més actualitzada.
Si us plau, conserveu el comprovant de compra per al servei de garantia.
