Manual d'instruccions de la prestatgeria cantonera flotant acrílica de 5 nivells Jetec

Introducció

Thank you for choosing the Jetec 5-Tier Acrylic Floating Corner Shelf. This manual provides essential information for the safe assembly, installation, and maintenance of your new corner shelving unit. Please read these instructions carefully before beginning installation and retain them for future reference.

Contingut del paquet

Abans del muntatge, verifiqueu que tots els components que s'enumeren a continuació siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.

• 5 x Acrylic Corner Shelf Panels
• 1 x Straight Acrylic Support Piece
• 1 Set of Mounting Screw Fittings (screws and wall anchors)

Figura 1: All components included in the package. This includes the five curved acrylic shelf panels, one straight acrylic support piece, and a set of screws with green wall anchors for mounting.

Informació de seguretat

• Always ensure proper installation using the provided mounting screw fittings. Incorrect installation may lead to instability and potential damage or injury.
• Do not exceed the load capacity of the shelves. While a specific weight limit is not provided, avoid placing excessively heavy items to prevent damage to the shelves or wall.
• Mantingueu les peces petites i els materials d'embalatge lluny dels nens per evitar perills d'asfixia.
• Before drilling, verify there are no electrical wires or plumbing pipes in the wall at the desired installation location.

Muntatge i muntatge

Follow these steps to assemble your Jetec 5-Tier Acrylic Floating Corner Shelf:

1. Traieu la pel·lícula protectora: Each acrylic panel comes with a protective film on both sides. Carefully peel off this film from all pieces before assembly. This ensures the clear, bright appearance of the shelves.
   

   Figura 2: Peeling the protective film from an acrylic shelf panel.

2. Identificar els components: Lay out all the acrylic pieces. You will have five curved shelf panels and one straight support piece. Note that there are two different curves for the shelf panels; ensure you group the three panels with the same curve together for alternating installation.
   

   Figura 3: Layout of acrylic components, including five curved shelves and one straight support piece, with approximate dimensions.

3. Pre-assemble Shelves (Optional): While the shelves are designed for individual wall mounting, you can loosely connect them to understand the alternating pattern. The straight support piece typically goes at the top or bottom, or can be used as a spacer.
   

   Figura 4: Illustration of how the shelf panels are designed to connect and mount to the wall, showing the screw points.

Instruccions d'instal·lació

The Jetec 5-Tier Acrylic Floating Corner Shelf is designed for wall mounting. Proper installation is crucial for stability and safety.

1. Tria la ubicació: Select a corner wall in your desired room (bathroom, bedroom, kitchen, living room, office). Ensure the wall surface is suitable for drilling and mounting.
2. Marqueu els punts de muntatge: Hold the first shelf panel against the wall in the desired position. Use a pencil to mark the locations for the screw holes. Use a level to ensure the shelf is straight.
3. Perforar forats pilot: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert the provided wall anchors into the pilot holes.
   

   Figura 5: Illustration of wall mounting, showing screw and anchor usage. The diagram also indicates two potential installation methods, one with a protective rail and one without, to protect the wall.
4. Mount First Shelf: Align the first acrylic shelf panel with the drilled holes. Insert the screws through the shelf's pre-drilled holes and into the wall anchors or directly into studs. Tighten securely, but do not overtighten to avoid cracking the acrylic.
5. Install Subsequent Shelves: Repeat the marking, drilling, and mounting process for the remaining four shelf panels. Ensure consistent spacing between shelves (approx. 7 inches vertically, as implied by the 36-inch total height for 5 tiers). Alternate the curve direction of the shelves as shown in product images to create the zigzag pattern.
   

   Figura 6: Example of the fully assembled 5-tier shelf mounted in a corner, demonstrating the alternating shelf orientation.

6. Comprovació final: Once all shelves are mounted, gently test their stability. Ensure all screws are tight and the shelves are level.

Instruccions de funcionament

The Jetec 5-Tier Acrylic Floating Corner Shelf is designed to provide organized storage and display space in various rooms.

• Col·locació d'elements: Use the shelves to store and display lightweight items such as books, CDs, small plants, photo frames, decorative accents, or personal care products.
• Capacitat de càrrega: Distribute weight evenly across each shelf. While a specific weight limit is not provided, avoid placing heavy objects that could stress the acrylic or mounting hardware.
• Estabilitat: Periodically check the tightness of the mounting screws to ensure the shelves remain securely attached to the wall.

Figura 7: The corner shelf in use, displaying various items in a living room setting.

Manteniment i cura

To maintain the appearance and longevity of your acrylic corner shelf, follow these simple care instructions:

• Neteja: Wipe the acrylic surfaces with a soft, dry cloth to remove dust and fingerprints. For more stubborn marks, use a damp cloth with mild soap and water, then dry immediately with a clean, soft cloth.
• Eviteu els netejadors durs: Do not use abrasive cleaners, ammonia-based products (like window cleaner), or solvents (like alcohol or paint thinner) as these can damage the acrylic surface.
• Evitar rascades: Acrylic can scratch easily. Avoid using rough cloths or abrasive materials when cleaning. Be careful when placing or removing items from the shelves.

Resolució de problemes

• Inestabilitat de la prestatgeria: If shelves feel loose or unstable after installation, re-check all mounting screws to ensure they are securely tightened. Verify that appropriate wall anchors were used for your wall type.
• Scratches on Acrylic: Acrylic is prone to scratching. To minimize this, handle shelves carefully during assembly and cleaning. Avoid dragging items across the surface.
• Protective Film Difficult to Remove: If the protective film is difficult to peel, try lifting a corner with a fingernail or a piece of tape to get a grip.

Especificacions

Garantia i Suport

For information regarding warranty coverage or technical support, please refer to the product packaging or contact the retailer where the product was purchased. You may also visit the official Jetec store on Amazon for further assistance: Jetec Store.