1. Producte acabatview
The Beghelli Emergency LED Lamp (Model BEG19500) is a high-quality emergency lighting solution designed to illuminate areas during power outages. This versatile lamp can be installed on walls, ceilings, or recessed, making it suitable for various environments. It features an 11W LED light source and is equipped with a long-lasting LiFe 3.2V 0.5 Ah battery, backed by a 5-year warranty.
Its robust design ensures functionality even in industrial settings, with an IP42 protection rating and IK05 impact resistance.
Figura 1: Frontal view of the Beghelli Emergency LED Lamp. El joamp features a white base and a transparent polycarbonate cover, revealing the LED light source inside.
2. Informació de seguretat
Always read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Assegureu-vos que el subministrament elèctric estigui desconnectat abans de qualsevol treball d'instal·lació o manteniment.
- This product operates on 230V. Consult a qualified electrician if unsure about wiring.
- No exposa la lamp to extreme temperatures or direct water spray beyond its IP42 rating.
- Do not attempt to open or modify the battery compartment or internal components, except as explicitly instructed.
- Dispose of batteries and electronic components according to local regulations. More information can be found on the manufacturer's website or local waste management authorities.
3. Instal·lació i configuració
The Beghelli Emergency LED Lamp offers flexible installation options:
- Preparació:
- Assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Desempaqueteu el lamp and verify all components are present: the lamp unit and included battery.
- Opcions de muntatge:
El lamp can be mounted on a wall, ceiling, or recessed. The unit has 3 pre-breakage inputs (ø16) and can be installed on a standard 503 recessed box.
- Muntatge de paret/sostre: Mark the desired mounting points using the lamp's base as a template. Drill holes and secure the lamp utilitzant els cargols adequats (no inclosos).
- Muntatge encastat: Prepare the recess opening according to the lamp's dimensions (L 280 x H 119 x P 46 mm). Ensure sufficient space for wiring.
- Cablejat:
- Connect the 230V power supply wires to the lamp's terminals. Ensure correct polarity.
- El lamp is designed for simple connection. If replacing an older unit, existing wiring may be compatible.
- Instal·lació de la bateria:
The LiFe 3.2V 0.5 Ah battery is included and typically pre-installed or easily connected. Ensure it is securely connected before closing the lamp coberta.
- Assemblea final:
Secure the transparent polycarbonate screen onto the lamp unit. Ensure it clicks into place for proper IP42 protection.
Figure 2: Photometric curve illustrating the light distribution pattern of the Beghelli Emergency LED Lamp. This diagram shows the intensity of light emitted at various angles.
4. Instruccions de funcionament
The Beghelli Emergency LED Lamp operates automatically in emergency mode (SA/SE).
- Funcionament normal: When main power (230V) is present, the lamp's battery charges. The LED light remains off.
- Operació d'emergència: En cas d'una potènciatage (blackout), the lamp automatically switches on, drawing power from its internal battery to provide emergency illumination.
- Durada de la bateria: El lamp provides 120 lumens for 1 hour or 80 lumens for 2 hours in emergency mode, depending on the configured setting. Refer to the installation instructions for details on adjusting this setting (if applicable, often involves cutting a wire or jumper as per customer reviews).
- Prova: Periodically test the emergency function by temporarily cutting the main power supply to the lamp's circuit. The lamp should illuminate immediately. Restore power after testing.
5. Manteniment
Regular maintenance ensures optimal performance and longevity of your emergency lamp.
- Neteja: Clean the transparent polycarbonate screen periodically with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Comprovació de la bateria: The LiFe battery has a 5-year warranty. While designed for long life, it is recommended to perform a full discharge test annually to assess battery health. Allow the lamp to operate until the battery is depleted, then restore power to allow it to fully recharge.
- Inspecció visual: Annually inspect the lamp for any signs of physical damage, loose connections, or discoloration.
- Substitució: Si la lamp fails to illuminate during a power outage or if the battery duration significantly decreases, the battery may need replacement. Contact a qualified technician for battery replacement.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp does not illuminate during power outage. |
|
|
| Lamp illuminates dimly or for a short duration. |
|
|
| Lamp roman encesa constantment. |
|
|
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Beghelli |
| Número de model | BEG19500 |
| Font d'alimentació | 230 V |
| Wattage | 11W |
| Flux lluminós | 120 lumens (1 hour) / 80 lumens (2 hours) |
| Tipus de bateria | LiFe 3.2V 0.5 Ah (Lithium Metal) |
| Bateria inclosa | Sí |
| Tipus d'instal·lació | Wall mount, Ceiling mount, Recessed |
| Dimensions (L x A x P) | 280 x 119 x 46 mm (11.02 x 4.69 x 1.81 polzades) |
| Pes | 400 grams (0.88 lliures) |
| Color | Blanc |
| Material | Polycarbonate (Screen: Transparent Polycarbonate) |
| Grau de Protecció | IP42 |
| Resistència a l'impacte | IK05 |
| Mode de funcionament | SA/SE (Emergency) |
8. Garantia i Suport
The Beghelli Emergency LED Lamp (Model BEG19500) comes with a 5 any de garantia on its LiFe 3.2V 0.5 Ah battery, ensuring long-term reliability.
For technical support, service, or warranty claims, please contact Beghelli customer service through their official weblloc web o distribuïdors autoritzats. Conserveu el rebut de compra com a comprovant de compra.
For information on recycling and disposal of the product, especially the battery and LED components, please refer to local regulations and guidelines for electronic waste. More information can be found on the manufacturer's website or local waste management authorities.
