Manual d'instruccions de cotxe Absima 12011 DIY

Introducció

Welcome to the instruction manual for your new Absima 12011 DIY Car. This 1:10 scale 4WD RC Crawler is designed for enthusiasts aged 14 and above, offering a robust and engaging remote-controlled driving experience. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your vehicle.

Figure 1: The Absima 12011 DIY Car, a 1:10 scale 4WD RC Crawler, featuring a durable black acrylonitrile butadiene styrene (ABS) body, large off-road tires, a front bumper with red tow hooks, and a roof-mounted cargo rack. The vehicle is equipped with front headlights and a light bar on the roof.

Instruccions de seguretat

Please read and understand all safety instructions before operating your vehicle. Failure to do so may result in injury or damage to the product.

• Aquest producte no és adequat per a nens menors de 14 anys sense la supervisió d'un adult.
• Conduïu sempre el vehicle en una zona segura i oberta, allunyada de persones, mascotes i obstacles.
• Do not operate the vehicle in wet conditions or near water to prevent electrical damage.
• Never touch moving parts of the vehicle during operation.
• Ensure batteries are charged correctly and handled safely. Do not short-circuit or overcharge batteries.
• Do not modify the vehicle or its components, as this may void the warranty and create safety hazards.
• Turn off the vehicle and transmitter when not in use.

Contingut del paquet

Please verify that all components are present in your package before beginning assembly. If any parts are missing or damaged, contact Absima support.

• Absima 12011 DIY Car Kit (unassembled components)
• Transmissor de control remot de 2.4 GHz
• Manual d'instruccions
• Required assembly tools (e.g., small wrenches, screwdrivers - may vary by kit)

Muntatge i muntatge

This section guides you through the assembly process of your Absima 12011 DIY Car. Follow the steps carefully for proper construction.

Vehicle Assembly

1. Construcció del xassís: Assemble the main chassis frame according to the detailed diagrams provided in the kit's separate assembly guide. Ensure all screws are tightened securely.
2. Axle and Suspension Installation: Attach the front and rear axles, along with the suspension components (shocks, links), to the chassis. Verify smooth movement of suspension.
3. Motor and Transmission Setup: Install the electric motor and transmission system. Ensure gears mesh correctly and are lubricated if necessary.
4. Instal·lació electrònica: Mount the Electronic Speed Controller (ESC), receiver, and steering servo. Connect all wires as per the wiring diagram.
5. Wheel and Tire Mounting: Attach the tires to the wheels and then secure the wheels to the axles.
6. Body Shell Preparation: Trim and paint the body shell if required. Mount the body shell onto the chassis using the provided body clips or mounts.

Instal·lació de bateries (vehicle)

Note: Vehicle batteries are not included with this kit.

• Ensure the vehicle's power switch is in the OFF position.
• Obriu el compartiment de la bateria.
• Insert a fully charged compatible battery pack (e.g., NiMH or LiPo, as recommended by the ESC specifications) into the compartment, ensuring correct polarity.
• Assegureu la tapa del compartiment de la bateria.

Configuració del transmissor

• Install the required batteries (e.g., AA batteries) into the transmitter, observing correct polarity.
• Enceneu l'emissor.
• Turn on the vehicle. The transmitter and receiver should automatically bind. If not, refer to the specific binding instructions for your transmitter/receiver model.

Conducció del vehicle

Controls bàsics

• Activador de l'accelerador: Estireu per avançar, empenyeu per frenar/retrocedir.
• Volant: Gireu a l'esquerra o a la dreta per dirigir el vehicle.
• Trim Dials: Adjust steering and throttle trim to ensure the vehicle drives straight and stops when the trigger is neutral.

Consells de conducció

• Start by driving in an open, flat area to get accustomed to the controls.
• For crawling, use slow and precise throttle inputs. The 4WD system provides excellent traction for navigating challenging terrain.
• Avoid sudden stops or turns at high speeds to prevent rollovers.
• Monitor battery levels and stop driving when performance decreases to avoid over-discharging.

Manteniment

Regular maintenance ensures the longevity and optimal performance of your Absima 12011 DIY Car.

• Neteja: After each use, especially in dirty or dusty conditions, clean the vehicle with a soft brush or compressed air. Avoid using water directly on electronics.
• Inspecció: Regularly check all screws for tightness. Inspect suspension components, drive shafts, and gears for wear or damage.
• Lubricació: Apply appropriate RC-specific grease or oil to moving parts like gears and bearings as needed to reduce friction and wear.
• Cura de la bateria: Store batteries in a cool, dry place. Follow manufacturer guidelines for charging and discharging LiPo batteries.
• Inspecció de pneumàtics: Check tires for wear and tear. Ensure they are securely mounted to the wheels.

Resolució de problemes

This section addresses common issues you might encounter with your Absima 12011 DIY Car.

Especificacions tècniques

Garantia i Suport

Absima products are designed for durability and performance. For technical support, spare parts, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Absima weblloc.

Spare parts availability for this model is typically supported for 1 year from the date of purchase. Please retain your proof of purchase for any warranty claims.