Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your eMACROS HS002C Solar Wireless Driveway Alarm System. This system is designed to detect motion from humans, vehicles, and large animals, providing alerts to enhance property security. Please read this manual thoroughly before installation and use.
Configuració
Contingut del paquet
- Receptor 1x
- 3x Solar Motion Sensors
- 1x Adaptador de corrent per al receptor
- Maquinari de muntatge (cargols, ancoratges)
- Manual d'instruccions
1. Powering the Receiver
Plug the receiver into a standard wall outlet using the provided power adapter. Ensure the receiver is powered on. The receiver is designed for indoor use.
Video: Demonstrates plugging in the receiver and initiating the pairing process by holding the power button until the channel light flashes.
2. Mounting the Solar Motion Sensors
The solar motion sensors are weatherproof and designed for outdoor use. Mount them on a stable surface such as a wall, fence post, or tree using the included mounting hardware. For optimal performance, ensure the solar panel faces direct sunlight for several hours daily. The swivel mount allows for precise adjustment of the detection angle.
- For detecting people: Install the sensor at a height of 3-4 feet, keeping it level and perpendicular to the ground.
- For detecting vehicles: Install the sensor at a height of 2-3 feet, keeping it level and perpendicular to the ground.
Image: A person installing an eMACROS solar motion sensor onto a wooden post using a drill, demonstrating easy installation.
3. Pairing Sensors with Receiver
To pair a sensor with the receiver, first ensure the receiver is in pairing mode (indicated by a flashing channel light, typically achieved by holding the power button for 10 seconds). Then, turn on the sensor and trigger its motion detection. The corresponding channel light on the receiver will illuminate solid red, indicating successful pairing. Repeat for all sensors.
Video: Shows the process of plugging in the receiver, activating pairing mode, and then triggering a sensor to complete the pairing.
Instruccions de funcionament
1. Adjusting Sensor Sensitivity
Each sensor has a sensitivity switch (Hi/Low) located under the rubber cover on the back. 'Hi' detects motion up to 30 feet, while 'Low' detects up to 20 feet. Adjust this setting to minimize false alarms from small animals or environmental factors.
2. Changing Chimes and Volume
The receiver offers multiple chime options and adjustable volume levels. Use the dedicated buttons on the receiver to cycle through chimes and adjust the volume to your preference. Different chimes can be assigned to different sensors to identify the detection zone.
3. Understanding Detection Zones
The system supports up to 4 sensors, each assigned to a distinct channel (1-4) on the receiver. When a sensor is triggered, the corresponding channel light on the receiver illuminates, and the selected chime sounds, indicating which zone has detected activity.
Image: A visual representation of the 1500ft wireless transmission range of the eMACROS driveway alarm system, showing a sensor detecting a car.
Manteniment
1. Càrrega solar
The sensors are equipped with solar panels for continuous charging. Ensure the solar panel is kept clean and free from obstructions (e.g., leaves, snow) to maximize charging efficiency. The unit charges even on cloudy or rainy days.
Image: A solar-powered sensor mounted on a tree, highlighting its ability to charge in various weather conditions.
2. Manual Charging
If prolonged periods of low sunlight occur, or if the sensor battery is low, you can manually charge the sensor using a USB-C cable (not included for sensors, but the receiver's adapter can be used). The charging port is located under the rubber cover on the back of the sensor.
3. Resistència a la intempèrie
The outdoor sensors feature industrial-grade PVC housing and rubberized weather/water-resistant seals (IP65 rated) to withstand various weather conditions, including sun, rain, wind, and snow.
Image: A solar sensor on a post, illustrating its robust design against various weather elements.
Resolució de problemes
- Falses alarmes: Adjust the sensor's sensitivity switch (Hi/Low) to a lower setting. Ensure the sensor is not pointed at moving foliage or objects that could trigger it.
- Sense detecció: Verify the sensor is powered on and fully charged. Check the line of sight between the sensor and the detected area. Ensure the sensor is correctly paired with the receiver.
- Interval pobre: Obstructions like thick walls, large trees, or metal structures can reduce wireless range. Try repositioning the sensor or receiver to improve signal strength. The system is tested for up to 1500ft in open conditions.
- El receptor no respon: Ensure the receiver is plugged into a working power outlet. Re-pair the sensors if necessary.
Especificacions
| Marca | eMACROS |
| Número de model | HS002C |
| Font d'alimentació (sensor) | Solar, amb bateria |
| Font d'alimentació (receptor) | Adaptador de CA (DC 5V) |
| Màxim abast sense fil | 1500 Feet (approx. 1/2 Mile) |
| Detection Range (Sensor) | Hi: 30ft, Low: 20ft |
| Temperatura de funcionament | -20 °C a 60 °C (-4 °F a 140 °F) |
| Resistència a la intempèrie | Impermeable IP65 |
| Components inclosos | 1 Receiver, 3 Sensors, Charging Cables, Adapters |
Garantia i suport
For detailed warranty information and customer support, please refer to the official eMACROS website or the full product manual included in your package. You may also contact eMACROS customer service directly via the contact information provided on the product packaging or weblloc.
