Brook Universal Fighting Board (UFB) Instruction Manual

Producte acabatview

The Brook Universal Fighting Board (UFB) is a versatile Printed Circuit Board (PCB) designed to provide multi-console compatibility for arcade sticks and fight sticks. It eliminates the need for multiple fight sticks for different gaming platforms, offering a unified solution for competitive and casual players.

Característiques principals:

• Multi-console support PS5 (With UFB-UP5)/Xb Series X/S/ Xb One / Xb 360 / PS4 / PS3 / PC / Wii U / PS Mini / MD mini. Backward-compatible PS4 games are playable on your PS5 console.
• Compatible with Brook UFB-UP5 upgrade Kit. Connect UFB-UP5 with Brook UFB, you can play PS5 fighting games on your Fightsticks.
• Build in SOCD cleaner. Headers are included. PS4 controller touchpad button simulation.
• No 8-minutes timeout issue on PS4. Effortless installation(Screw terminal block for easy connections) and Upgradable firmware.
• Console auto detection(PS3 / PS4 / Xb 360 / Xb One) and Console manual selection(PS4 / PS3 / Xb One / Xb 360 / Wii U / PS classic / MD mini).

Instruccions de configuració

The Brook Universal Fighting Board is designed for straightforward installation into most arcade stick enclosures.

Eines i materials necessaris:

• Joc de tornavisos (Phillips i de punta plana)
• Wire strippers/crimpers (if not using pre-terminated wires)
• Fight stick enclosure
• Joystick and pushbuttons
• Compatible wiring harness (e.g., Brook Fighting Board Cable, sold separately)
• USB cable (Type-B to Type-A)

Passos d'instal·lació:

1. Prepareu el recinte: Ensure your fight stick enclosure is open and all existing wiring is disconnected or removed if you are replacing an old PCB.
2. Mount the UFB: Securely mount the Brook UFB inside the enclosure using appropriate screws or standoffs. Ensure it is placed in a location that allows for easy access to its screw terminals and USB port.



3. Connect Joystick: Connect the 5-pin joystick harness to the J3 connector on the UFB. Ensure correct orientation.
4. Connect Buttons: Connect each pushbutton's signal wire to its corresponding screw terminal (e.g., 1P, 2P, 3P, 4P, etc.) on the UFB. Connect all ground wires from the buttons and joystick to the GND terminals. The UFB's screw terminal block facilitates easy connections without soldering.
5. Connectar USB: Plug a USB Type-B cable into the UFB's USB port and route the other end (Type-A) out of the enclosure to connect to your console or PC.
6. Tancament tancat: Once all connections are verified, carefully close and secure your fight stick enclosure.

Instruccions de funcionament

The Brook Universal Fighting Board features automatic console detection for most supported systems.

Automatic Console Detection:

Simply connect your fight stick to the desired console (PS3, PS4, Xbox 360, Xbox One) via the USB cable. The UFB will automatically detect the console and configure itself for use.

Manual Console Selection:

For certain consoles (Wii U, PS Classic, MD mini) or if automatic detection fails, you can manually select the console mode by holding specific buttons during power-up:

• PS4: Aguanta 1P (Light Punch) button.
• PS3: Aguanta 1K (Light Kick) button.
• Xbox One: Aguanta 2P (Medium Punch) button.
• Xbox 360: Aguanta 2K (Medium Kick) button.
• Wii U: Aguanta 3P (Heavy Punch) button.
• PS Classic / MD Mini: Aguanta 3K (Heavy Kick) button.

Release the button once the fight stick is connected and recognized by the console.

PS4 Touchpad Simulation:

The UFB supports touchpad button simulation for PS4 games. Refer to the specific wiring diagram for your setup to enable this feature.

Funció turbo:

The UFB supports turbo functionality. Consult the official Brook website or the detailed PDF manual for specific button combinations to activate and configure turbo settings.

Manteniment

The Brook UFB is a durable component, but proper care ensures its longevity.

• Keep the PCB clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the board to extreme temperatures or moisture.
• Ensure all wire connections are secure and free from strain. Periodically check connections for looseness.

Resolució de problemes

Problemes comuns i solucions:

Fight Stick Not Recognized by Console:

• Comprova la connexió USB: Ensure the USB cable is securely connected to both the UFB and the console/PC. Try a different USB port or cable.
• Verify Console Mode: If automatic detection fails, try manually selecting the console mode by holding the appropriate button during connection (refer to "Manual Console Selection" above).
• Actualitzar el firmware: Ensure the UFB firmware is up to date. Visit the official Brook weblloc web per obtenir el firmware i les instruccions d'actualització més recents.

Els botons o el joystick no responen:

• Comproveu el cablejat: Inspect all wire connections from the joystick and buttons to the UFB's screw terminals. Ensure they are correctly wired and securely fastened.
• Test Components: If possible, test individual buttons and the joystick with a multimeter to ensure they are functioning correctly.
• Connexions a terra: Verify that all ground wires are properly connected to the GND terminals on the UFB.

8-Minute Timeout on PS4:

• The Brook UFB is designed to prevent the 8-minute timeout issue on PS4. If you experience this, ensure your UFB is genuine and its firmware is updated to the latest version.

Especificacions

Garantia i Suport

Informació de la garantia:

For detailed warranty information regarding your Brook Universal Fighting Board, please refer to the official Brook weblloc web o contacteu directament amb el seu servei d'atenció al client.

Suport tècnic:

If you encounter any issues not covered in this manual or require further assistance, please visit the official Brook support page or contact their technical support team.

Manual d'usuari oficial (PDF): Descarrega el manual en PDF

Brook Store: Visit Brook Store on Amazon