1. Introducció
The KPS CONFORTLINE CRONO RF is a digital programmable thermostat designed for heating or air conditioning systems. It features a wireless communication system between its emitter and receiver units, offering flexible placement and remote temperature control. This manual provides essential information for the safe and efficient operation of your thermostat.
2. Informació de seguretat
- Installation should only be performed by qualified personnel to prevent electrical hazards.
- Ensure the main power supply is disconnected before any installation or maintenance work.
- No exposeu el dispositiu a temperatures extremes, humitat o llum solar directa.
- Mantingueu el dispositiu allunyat de l'aigua i altres líquids.
- Use only the specified battery type for the emitter unit.
3. Contingut del paquet
Please check that all components are present in the package:
- 1 x Emitter Unit (Thermostat)
- 1 x Unitat receptora
- Accessoris de muntatge (cargols, tacs de paret)
- Manual d'usuari
Nota: 2 AA 1.5V batteries for the emitter unit are no inclòs.
4. Configuració
4.1. Mounting the Units
The KPS CONFORTLINE CRONO RF system consists of two main units: an emitter (thermostat) and a receiver. The emitter unit is designed for surface wall mounting, allowing flexible placement within your living space. The receiver unit should be connected to your heating system (boiler) and a 230V mains power supply.
The maximum communication range between the emitter and receiver is 100 meters in open air and over 30 meters inside buildings, thanks to its radio frequency communication.
Figure 1: KPS CONFORTLINE CRONO RF Emitter (left) and Receiver (right) Units.
4.2. Alimentació de les unitats
- Emitter Unit: Insert 2 AA 1.5V batteries (not included) into the battery compartment on the back of the emitter unit.
- Unitat receptora: Connect the receiver unit to a 230V 50/60Hz mains power supply and to your heating system (e.g., gas boiler or electric heating). Wiring requires professional electricians.
Figura 2: Esquena view of the Receiver Unit with wiring terminals. Professional installation is recommended.
4.3. Initial Pairing (if necessary)
The emitter and receiver units are typically pre-paired at the factory. If they do not communicate, refer to the detailed pairing instructions in the full product manual or contact customer support.
Video 1: This video demonstrates the installation and pairing process for a similar RF programmable boiler thermostat. It provides a visual guide to connecting the units and establishing communication.
5. Instruccions de funcionament
The emitter unit features an LCD screen with backlighting and a selection dial for easy navigation and temperature adjustment.
5.1. Pantalla i controls
The LCD screen displays ambient temperature, set temperature, time, and current operating mode. Use the selection dial to navigate menus and adjust settings.
Video 2: This video illustrates the general operation and temperature adjustment using a dial on a similar smart thermostat. It highlights the intuitive control for setting desired temperatures.
5.2. Modes de funcionament
The thermostat offers multiple operating modes to suit your needs:
- Mode automàtic: Follows the programmed schedule for temperature control.
- Mode manual: Allows you to set a constant temperature that overrides the schedule until changed.
- Mode manual temporal: Sets a temporary temperature that will revert to the automatic schedule after a set period.
- Mode de vacances: Maintains a specific temperature for an extended period, ideal for when you are away.
5.3. Programació
The thermostat supports configurable programming with 6 daily intervals. Two pre-configured programs are included for quick setup. Refer to the full manual for detailed instructions on customizing your heating schedule.
Video 3: This video demonstrates the basic operation and temperature adjustment using the dial on a similar smart thermostat, providing a quick overview de la seva funcionalitat.
5.4. Configuració de la pantalla
The thermostat's LCD display is backlit for clear visibility. You can adjust settings related to the display, such as keeping it always on, if desired.
Video 4: This video explains how to keep the thermostat's screen always on, a useful feature for continuous monitoring of temperature settings.
6. Manteniment
- Clean the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Replace the emitter unit batteries when the low battery indicator appears on the display.
- Ensure the receiver unit's power connection is secure.
7. Solució De Problemes
- Sense pantalla/alimentació: Check batteries in the emitter unit. Ensure the receiver unit is properly connected to the 230V mains supply.
- No Communication (RF): Verify that both units are powered. Ensure they are within the specified communication range. Re-pair the units if necessary (refer to the full manual).
- Lectura de temperatura incorrecta: Ensure the emitter unit is not placed near heat sources or in direct sunlight. Calibrate the temperature if an offset is detected (refer to the full manual).
- El sistema de calefacció no respon: Check the wiring connections between the receiver unit and the boiler. Ensure the thermostat is in an active heating mode (e.g., Manual or Automatic with a set temperature above ambient).
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | 300300066 |
| Marca | KPS |
| Tipus | Termòstat digital programable |
| Tecnologia de connectivitat | Ràdio Freqüència (RF) |
| Àmbit de comunicació | Up to 100m (open air), >30m (indoors) |
| Emitter Power Supply | 2 piles AA de 1.5 V (no incloses) |
| Font d'alimentació del receptor | 230V 50/60Hz Mains Connection |
| Tipus de visualització | LCD amb llum de fons |
| Interval de mesura de temperatura | 0ºC - 40ºC |
| Precisió de la temperatura | 0.5ºC |
| Interval de configuració de temperatura | 5ºC - 35ºC |
| Contacte de commutació | Potential-free, max 5A/230V |
| Modes de funcionament | Automatic, Manual, Temporary Manual, Holiday |
| Programació | 6 daily intervals, 2 pre-configured programs |
| Dimensions de l'emissor | 86x86x29 mm |
| Dimensions del receptor | 86x86x29 mm |
| Pes | 300 g (total product) |
| Certificacions | EN 60730-1:2011, EN 60730-2-9:2010 |
9. Garantia i Suport
This KPS product is covered by a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the KPS official weblloc.
For technical support, troubleshooting assistance, or any questions regarding your KPS CONFORTLINE CRONO RF thermostat, please contact KPS customer service through the contact information provided in your product packaging or on the official KPS weblloc.
