Manual d'instruccions de reverberació dels pedals JHS Sèrie 3

Introducció

The JHS Pedals 3 Series Reverb is an extremely versatile unit designed to enhance your guitar's sound with rich, ambient textures. It allows for a wide range of reverberation effects, from subtle room sounds to expansive, ethereal washes. The intuitive controls provide precise adjustment over the reverb's characteristics, ensuring seamless integration into your musical expression.

Figura 1: Frontal view of the JHS 3 Series Reverb pedal, showcasing its clean white finish, three control knobs (VERB, EQ, DECAY), a pre-delay toggle switch, input/output jacks, and footswitch with indicator LED.

Configuració

Follow these steps to properly set up your JHS 3 Series Reverb pedal:

1. Connexió d'alimentació: The JHS Pedals 3 Series Reverb requires a 9V DC Negative Center power supply and consumes 74mA. Connect a compatible power adapter to the 9V DC input jack located at the top of the pedal.
2. Connexió de l'instrument: Connecteu la vostra guitarra o un altre instrument a ENTRADA jack al costat dret del pedal mitjançant un cable d'instrument estàndard de 1/4 de polzada.
3. AmpConnexió del lifier: Connecteu el SORTIDA presa al costat esquerre del pedal al vostre amplifier or the next pedal in your signal chain using another standard 1/4-inch instrument cable.
4. Col·locació: Place the pedal on a stable surface, such as a pedalboard or floor, where it can be easily accessed during play.

Figura 2: lateral view of the JHS 3 Series Reverb pedal, illustrating the placement of the 1/4-inch input and output jacks for connecting to your instrument and ampmés viu.

Funcionament del pedal

The JHS 3 Series Reverb features three primary control knobs and a toggle switch for shaping your reverb sound:

• 
  VERB Knob: This control adjusts the overall mix or intensity of the reverb effect. Turn it clockwise to increase the amount of reverb blended with your dry signal, creating a more pronounced and spacious sound. Turn it counter-clockwise to reduce the reverb, allowing more of your dry signal to come through.
• 
  Botó EQ: The EQ knob allows you to tailor the tonal character of the reverb. Rotating it clockwise will brighten the reverb's texture, adding more high-frequency content. Turning it counter-clockwise will darken the reverb, emphasizing lower frequencies and creating a warmer, more subdued ambiance.
• 
  Bot de decaïment: This control determines the length of the reverb tail. A higher DECAY setting (clockwise) will result in a longer, more sustained reverb, creating vast and atmospheric soundscapes. A lower setting (counter-clockwise) will produce a shorter, more subtle reverb, suitable for tighter spaces or quick reflections.
• 
  PRE-DELAY Toggle Switch: This switch introduces a short delay before the reverb effect begins. This feature allows for a variety of effects, from a distinct slap-back echo before the reverb (like singing in a shower) to more subtle, spring-like sounds. Experiment with this switch in conjunction with the other controls to discover unique textures.

To activate the effect, press the footswitch. The indicator LED will illuminate when the effect is active.

Manteniment

To ensure the longevity and optimal performance of your JHS 3 Series Reverb pedal, follow these maintenance guidelines:

• Keep the pedal clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Protect the pedal from extreme temperatures, humidity, and direct sunlight.
• Disconnect power and instrument cables when the pedal is not in use for extended periods.
• Handle the footswitch and knobs gently to prevent damage.

Resolució de problemes

If you encounter any issues with your JHS 3 Series Reverb pedal, refer to the following common troubleshooting tips:

• Sense so:
  • Ensure all cables (instrument, amplifier, power) are securely connected.
  • Verify the power supply is correctly connected and providing the specified 9V DC Negative Center power.
  • Check if your instrument and amplifier are functioning correctly independently of the pedal.
  • Ensure the pedal's effect is engaged (LED illuminated).
• Soroll no desitjat (brunzit/brunzit):
  • Use a high-quality, isolated power supply.
  • Check all instrument cables for damage or poor shielding.
  • Ensure the pedal is not placed too close to power transformers or other sources of electromagnetic interference.
• Effect Not Working as Expected:
  • Review the "Operating the Pedal" section to ensure knobs and switches are set as desired.
  • Test with different cables and instruments to rule out external factors.

If the issue persists after attempting these steps, please contact JHS Pedals customer support for further assistance.

Especificacions

Garantia i Suport

JHS Pedals are known for their quality and are proudly made in Kansas City, USA. For specific warranty information, product registration, or technical support, please visit the official JHS Pedals weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Podeu trobar més informació i dades de contacte a Botiga de pedals JHS a Amazon.