NICREW RGB+W 24/7 LED Aquarium Light Instruction Manual

1. Producte acabatview

The NICREW RGB+W 24/7 LED Aquarium Light is designed to provide comprehensive and customizable lighting for planted freshwater aquariums. Featuring a full spectrum output, it supports plant growth from low to high light levels and enhances the vibrant colors of your fish and aquatic environment. The light includes an integrated controller and a remote for easy programming of daily light cycles and special effects.

Característiques principals:

• Full Spectrum RGB+W LEDs: Combines cool white (6500K) with RGB LEDs for a customizable spectrum, ideal for freshwater plants and fish.
• Programmable 24/7 Lighting Cycle: Features five adjustable time periods to simulate natural sunrise, daylight, sunset, and moonlight phases over 24 hours.
• Adjustable Color Spectrum: Fine-tune individual RGB and white LED channels to create desired lighting effects.
• Múltiples modes predefinits: Includes five built-in lighting modes and four weather modes (cloudy, lightning, sunny, moonlight) to simulate natural conditions.
• Funció de memòria d'apagada: Retains programmed settings after a power interruption, requiring only current time adjustment.
• Extendable Brackets: Designed with adjustable brackets to fit various aquarium sizes (36-48 inches for this model).
• Disseny durador i impermeable: IP67 waterproof rating protects the light from water and humidity intrusion. Features an aluminum shell for efficient heat dissipation.

2. Configuració i instal·lació

2.1. Desembalatge i components

Traieu amb cura tots els components de l'embalatge. Assegureu-vos que hi hagi els elements següents:

• NICREW RGB+W 24/7 LED Aquarium Light fixture
• Inline Controller with LCD display
• Comandament a distància per infrarojos (IR).
• Adaptador d'alimentació
• Extendable Mounting Brackets (2 sets, one stepped, one straight)
• Manual d'instruccions

Image: The main components of the NICREW RGB+W 24/7 LED Aquarium Light, including the light fixture, inline controller, and remote control.

2.2. Attaching Mounting Brackets

The light comes with two types of extendable brackets to accommodate different aquarium rim styles and desired light heights. Choose the set that best suits your tank.

1. Slide the brackets into the slots on each end of the light fixture.
2. Extend the brackets to match the width of your aquarium.
3. Carefully place the light fixture onto the rim of your aquarium, ensuring it is stable and centered.

Image: The light fixture with extendable brackets attached, demonstrating its placement on an aquarium rim.

2.3. Connexió d'alimentació

Connect the inline controller to the light fixture, then connect the power adapter to the inline controller. Finally, plug the power adapter into a suitable electrical outlet. Ensure all connections are secure.

Nota important de seguretat:

• Always ensure your hands are dry before handling electrical components.
• Position the power adapter and controller in a drip loop to prevent water from traveling along the cord to the electrical outlet.
• While the light fixture itself has an IP67 waterproof rating, the power adapter and inline controller are not waterproof and should be kept away from water.

3. Instruccions de funcionament

The NICREW RGB+W 24/7 LED Aquarium Light offers various modes and customization options via its inline controller and remote control.

3.1. Configuració de l'hora actual

Before using the 24/7 mode, set the current time on the inline controller:

1. Ensure the controller is in 24/7 mode (indicated by "24/7" on the remote or a specific display on the inline controller).
2. Premeu el botó TEMPS button on the remote or the corresponding button on the inline controller. The display will show the current time.
3. Utilitza el H+/H- i M+/M- botons per ajustar l'hora i els minuts.
4. Premeu el botó DESA button (often the same as TEMPS or a dedicated button) to save the settings.

Image: The remote control for the aquarium light, showing various buttons for time, modes, and color adjustments.

3.2. 24/7 Lighting Cycle (Circadian Timer)

The 24/7 mode simulates a natural day-night cycle with gradual changes in light intensity and color. It features five programmable lighting phases (P1-P5).

Image: A visual representation of the 24/7 lighting cycle, showing how light intensity and color change throughout the day.

To program each lighting phase:

1. Press the desired phase button (P1 a P5) briefly. The LCD display will flash.
2. Utilitza el H+/H- i M+/M- buttons to set the start time for that phase.
3. Use the color buttons (W, R, G, B) and their respective up/down arrows to adjust the intensity of each color channel for that phase.
4. Press the phase button again to save the settings and move to the next phase, or press DESA per sortir de la programació.

The light also includes 3 sunrise and sunset ramp times (0/15/30 minutes) for smoother transitions between phases.

3.3. Preset Lighting Modes

The remote control offers 5 preset lighting modes (M1-M4, plus a general white mode) and 4 weather modes for quick selection:

• Preset Modes (M1-M4): These buttons allow you to store and recall up to four custom color combinations. To save a custom color, adjust the RGB+W channels as desired, then hold down an M button (M1-M4) for 3 seconds until the light blinks.
• Weather Modes:
  • Ennuvolat: Simulates an overcast day.
  • Llamp: Creates a dynamic lightning storm effect.
  • Assolellat: Provides bright, full-spectrum daylight.
  • Clar de lluna: Offers a soft, blue light for nighttime viewing.

Imatge: Examples of the four weather modes available, simulating various natural lighting conditions.

3.4. Adjusting Color Spectrum

You can manually adjust the intensity of the white, red, green, and blue LEDs to create a custom color spectrum:

1. Premeu el botó W, R, G, or B button to select the desired color channel.
2. Use the up/down arrow buttons to increase or decrease the brightness intensity of that channel by 10% with each press.

Image: Controls for fine-tuning the individual color channels (White, Red, Green, Blue) to achieve a custom light spectrum.

3.5. Guia de vídeo del producte

For a visual guide on unboxing, setup, and programming the light, please refer to the official product video below:

4. Manteniment

Regular maintenance ensures optimal performance and longevity of your aquarium light.

4.1. Cleaning the Light Fixture

• Before cleaning, always unplug the light fixture from the power outlet.
• Wipe the exterior of the light fixture with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or the LED cover.
• Assegureu-vos que la llum estigui completament seca abans de tornar-la a connectar.
• The IP67 waterproof rating means the light is protected against dust and temporary immersion in water (up to 1 meter for 30 minutes). However, for longevity, avoid unnecessary immersion and always handle with care.

4.2. Controller and Remote Care

• Keep the inline controller and remote control dry at all times. They are not waterproof.
• Netegeu amb un drap sec i suau.
• Replace the remote control battery as needed (1 Lithium Ion battery included).

5. Solució De Problemes

If you encounter issues with your NICREW RGB+W 24/7 LED Aquarium Light, refer to the following common solutions:

• La llum no s'encén:
  • Comproveu si l'adaptador de corrent està ben connectat tant al controlador com a la presa de corrent.
  • Ensure the electrical outlet is functioning correctly by testing it with another device.
  • Verify that the light is not in an "OFF" phase of the 24/7 cycle or a manual off state.
• La configuració es perd després d'apagar l'alimentaciótage:
  • The light has a power-off memory function for programmed cycles, but the current time may need to be reset. Follow the "Setting Current Time" instructions in Section 3.1.
• El comandament a distància no respon:
  • Ensure there are no obstructions between the remote and the inline controller's IR sensor.
  • Reviseu i substituïu la pila del comandament a distància si cal.
• Inconsistent light output or visible defects:
  • Inspect the LED surface for any visible damage or debris that might be affecting light distribution.
  • If you observe manufacturing defects such as uneven silicone work or cable splitting, contact customer support for assistance.

6. Especificacions del producte

Image: Detailed specifications table for various NICREW RGB+W 24/7 LED Aquarium Light models, including the 36-48 inch version.

7. Garantia i Suport

NICREW offers a Hassle-Free 12-Month Warranty for this product. For any questions, technical support, or warranty claims, please contact NICREW customer service. They provide 24-hour friendly customer service to assist you.

Please refer to the contact information provided in your product packaging or visit the official NICREW weblloc web per obtenir els detalls d'assistència més actualitzats.