1. Producte acabatview
The Häfele Metalla SM Combination 110° Soft Close Hinge is a high-quality, nickel-plated steel hinge designed for cabinet doors. This set includes two hinges and two cross plates with Euro screws, providing a complete solution for your cabinet installation needs.
Les característiques clau inclouen:
- Automatic closing and soft close mechanism for quiet and smooth operation.
- Click system for easy and quick installation.
- Designed for wooden doors with a 48/6 drilling pattern.
- Adjustable for precise fitting: side adjustment ± 1.5 mm, height adjustment ± 2 mm (via mounting plate), and depth adjustment -1 to +3 mm.
Figura 1: Frontal view of the Häfele Metalla SM Combination 110° Soft Close Hinge.
Figura 2: Part inferior view of the hinge, showing the soft-close mechanism.
Figura 3: lateral view of the hinge, illustrating its compact design.
2. Informació de seguretat
Please read the following safety information carefully before installation and use:
- Perill d'asfixia: This product contains plastic bags or small parts. Keep out of reach of children. Not suitable for children under 36 months.
- Frequent removal and reattachment of fasteners should be avoided, as this could impair functionality.
- Use the product exclusively according to its intended application.
Figure 4: Original warning label provided with the product.
3. Configuració i instal·lació
The Häfele Metalla SM hinges are designed for straightforward installation on wooden doors. Ensure you have the necessary tools, including a drill for the 35mm cup hole and a screwdriver.
3.1. Eines necessàries
- Drill with 35mm Forstner bit
- Screwdriver (Phillips head recommended for Euro screws)
- Cinta mètrica i llapis
3.2. Passos d'instal·lació
- Prepara la porta: Drill a 35mm diameter cup hole into the cabinet door at the specified distance from the edge. The hinge is designed for a 48/6 drilling pattern. Refer to Figure 5 for typical dimensions.
- Attach Hinge to Door: Insert the hinge cup into the drilled hole on the door. Secure the hinge to the door using the provided screws.
- Attach Cross Plate to Cabinet: Position the cross plate on the cabinet frame or side panel. Use the Euro screws to secure the cross plate. Ensure the cross plate is aligned correctly for the inner stop application.
- Connect Hinge to Cross Plate: Align the hinge arm with the cross plate. The "click system" allows for easy attachment. Press the hinge arm onto the cross plate until it clicks into place.
- Adjust the Door: Once the door is mounted, use the adjustment screws on the hinge to fine-tune the door's position.
Figure 5: Diagram illustrating typical hinge dimensions and mounting position (dimensions in mm).
3.3. Ajust
The hinges offer multiple adjustment options for perfect door alignment:
- Ajust lateral: ± 1.5 mm
- Ajust d'alçada: ± 2 mm (via mounting plate)
- Ajust de profunditat: -1 to +3 mm
Figure 6: Inner stop adjustment table, showing relationship between cup distance (E) and mounting plate distance for various door overlays.
4. Instruccions de funcionament
Once installed and adjusted, the Häfele Metalla SM hinges operate automatically. The 110° opening angle allows for ample access to cabinet contents.
- Obertura: Gently pull the cabinet door open. The hinge will allow the door to swing open up to 110 degrees.
- Tancament: Push the cabinet door towards the closed position. The integrated soft-close mechanism will engage, slowly and quietly pulling the door shut, preventing slamming.
5. Manteniment
The Häfele Metalla SM hinges are designed for durability and require minimal maintenance. Regular care will ensure their longevity and smooth operation.
- Neteja: Wipe the hinges periodically with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or harsh chemicals, as these can damage the nickel-plated finish.
- Lubricació: Under normal use, the hinges do not require lubrication. If you notice any squeaking or stiffness after extended use, a small amount of silicone-based lubricant can be applied to the pivot points.
- Inspecció: Periodically check all screws for tightness. Loose screws can affect hinge performance and door alignment. Tighten any loose screws gently to avoid stripping.
6. Solució De Problemes
If you encounter any issues with your Häfele Metalla SM hinges, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Door does not close fully or is misaligned. | Loose screws, incorrect adjustment, or obstruction. |
|
| Soft-close mechanism not working effectively. | Hinge mechanism dirty or damaged, or door too heavy. |
|
| Hinge squeaks when opening or closing. | Lack of lubrication or friction. |
|
7. Especificacions
| Atribut | Detall |
|---|---|
| Marca | Hafele |
| Número de model | 101739HEF |
| Material | Acer |
| Acabar | Niquelada |
| Angle d'obertura | 110° |
| Tipus de frontissa | Combination (Inner Stop) |
| Diàmetre de la copa | 35 mm |
| Tancament suau | Sí, integrat |
| Components inclosos | 2 hinges, 2 cross plates with Euro screws |
| Ajust lateral | ± 1.5 mm |
| Ajust d'alçada | ± 2 mm (via mounting plate) |
| Ajust de profunditat | -1 to +3 mm |
8. Garantia i Suport
Information regarding specific warranty terms or direct customer support contact details for this product is not provided in the available documentation. For warranty claims or technical assistance, please refer to the retailer or the official Hafele weblloc web per obtenir informació general d'assistència.
