1. Introducció
The Overmax AD-06 is a professional-grade electrochemical alcohol tester designed for accurate and reliable measurement of alcohol concentration in exhaled breath. This device utilizes an advanced platinum electrochemical sensor, similar to those used in law enforcement, to provide precise results. This manual provides essential information for the proper use, maintenance, and understanding of your AD-06 device.
2. Producte acabatview
The Overmax AD-06 is a compact and portable device. It features a clear, two-color backlit LCD screen for easy reading of results and indicators. The package includes the main unit and 10 disposable mouthpieces.

Image: The Overmax AD-06 Electrochemical Alcohol Tester, showcasing its compact design and included mouthpieces.
3. Característiques clau
- Electrochemical Platinum Sensor: Provides high accuracy and reliability, resistant to interference from cigarette smoke.
- Alta precisió de mesura: Up to 0.05 per mil.
- Ampli rang de mesura: 0.00 to 4.00 per mil.
- Two-Color Backlit LCD Screen: Ensures clear visibility of results and device status.
- Alertes sonores: Notifies the user of operational readiness and detection.
- Extended Airflow Meter: Ensures proper breath sampla col·lecció.
- Funció de memòria: Stores the last 50 measurements.
- Apagat automàtic: Conserva la durada de la bateria.
- Funciona amb piles: Requereix 2 piles AA.
4. Configuració
- Insereix les piles: Open the battery compartment on the back of the device. Insert two AA batteries, ensuring correct polarity. Close the compartment securely.
- Connecteu la boquilla: Select a clean mouthpiece from the provided set. Firmly attach it to the mouthpiece port on the side of the device. Ensure it is securely fitted to prevent air leakage during testing.
5. Instruccions de funcionament
- Encès: Press and hold the power button to turn on the device. The LCD screen will illuminate.
- Escalfament: The device will display a warm-up countdown, typically 5 seconds. Wait until the device indicates it is ready for testing.
- Take a Breath SampLI: When prompted, take a deep breath. Place your lips around the mouthpiece and blow steadily and continuously for an extended period (as indicated by the device, usually until an audible signal or screen prompt). Ensure no air escapes from the sides of your mouth.
- View Resultats: After a response time of approximately 5 seconds, the measurement result will be displayed on the LCD screen. The result will be shown in per mil (‰), mg/L, or BAC, depending on the selected unit.
- Apagat automàtic: El dispositiu s'apagarà automàticament després d'un període d'inactivitat per estalviar bateria.
- Review Historical Measurements: The device saves the last 50 measurements. Refer to the device's on-screen menu (if available) to access this history.
Important: For accurate results, wait at least 20 minutes after consuming alcohol or smoking before performing a test. Always use a new, clean mouthpiece for each test.
6. Manteniment
- Mouthpiece Hygiene: Always use a fresh, clean mouthpiece for each test. Dispose of used mouthpieces responsibly.
- Neteja del dispositiu: Wipe the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Substitució de la bateria: When the low battery indicator appears on the screen, replace both AA batteries promptly to ensure accurate operation.
- Calibració: The electrochemical sensor requires periodic calibration to maintain accuracy. Overmax offers unlimited free calibration for 36 months from the date of purchase. Refer to the warranty information or contact Overmax support for calibration services.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
7. Solució De Problemes
- El dispositiu no s'encén:
- Comproveu si les piles estan inserides correctament.
- Substituïu-les per piles AA noves.
- Lectures inexactes o inconsistents:
- Ensure you have waited at least 20 minutes after consuming alcohol or smoking.
- Confirm the mouthpiece is securely attached and there are no leaks.
- Ensure a steady and continuous breath sampes proporciona.
- The device may require calibration. Refer to the 'Maintenance' section.
- Device displays an error message:
- Apagueu el dispositiu i torneu-lo a encendre.
- If the error persists, contact customer support.
8. Especificacions
| Fabricant | Sobremàx |
| Marca | Sobremàx |
| Model | AD-06 |
| Dimensions del producte (L x A x A) | 11.6 x 5.2 x 2 cm |
| Pes de l'article | 68 grams |
| Font d'alimentació | Funciona amb piles (necessiten 2 piles AA) |
| Tipus de sensor | Electroquímica |
| Precisió | 0.05 per mil |
| Interval de mesura | 0.00 - 4.00 per mil |
| Mostra | LCD with two-color backlight |
| Temps de preparació | 5 segons |
| Temps de resposta | 5 segons |
| Memòria | Últimes 50 mesures |
| Vol operatiu mínimtage | 1.5 Volts |
| Certificacions | CE |
9. Garantia i Suport
The Overmax AD-06 comes with a warranty that includes unlimited free calibration for 36 months from the date of purchase. For warranty claims, calibration services, or technical support, please refer to the contact information provided with your product packaging or visit the official Overmax weblloc.





