Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Corally COR54011 TOROX 185A Brushless 2-6SS Speed Controller. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Corally TOROX 185A ESC is designed for high-performance RC applications, offering robust power delivery and advanced programmability for various motor and battery configurations.
Producte acabatview
Image: The Corally COR54011 TOROX 185A Brushless Speed Controller, showcasing its red housing, integrated cooling fan, and robust gold-plated motor and battery connectors. The unit features a Team Corally logo on the side.
The TOROX 185A ESC is a powerful electronic speed controller featuring a durable red casing, an integrated cooling fan for thermal management, and multiple connection points for motor and battery. It supports both sensored and sensorless brushless motors (in sensorless mode) and is designed for 1/8th scale RC vehicles.
Precaucions de seguretat
- Always disconnect the battery from the ESC when not in use.
- Ensure proper polarity when connecting batteries to avoid damage.
- Treballeu en una zona ben ventilada per evitar el sobreescalfament.
- Keep away from water unless specifically designed for waterproof operation (this model has water protection).
- Do not attempt to disassemble or modify the ESC.
- Use appropriate motor and battery combinations as specified to prevent overload.
Configuració i instal·lació
1. Mounting the ESC
Securely mount the ESC in your vehicle using double-sided tape or screws, ensuring good airflow around the unit for effective cooling. Avoid mounting near heat sources or in enclosed spaces.
2. Connexió del motor
Connect the three motor wires from your brushless motor to the corresponding gold-plated terminals (A, B, C) on the ESC. Ensure a secure connection. For sensored motors, connect the sensor wire to the sensor port on the ESC and motor.
3. Connexió de la bateria
Connect your battery pack to the XT90 connector on the ESC. This ESC supports 2-6S LiPo or 9-18 Cell NiMH batteries. Always double-check polarity before connecting.
4. Connexió del receptor
Plug the ESC's receiver cable into the throttle channel (usually Channel 2) of your RC receiver. The BEC (Battery Eliminator Circuit) provides power to the receiver and servos.
5. Calibració
Before first use, calibrate the ESC with your radio transmitter. Refer to your transmitter's manual for specific calibration steps. Generally, this involves turning on the transmitter, holding full throttle, turning on the ESC, waiting for beeps, moving to full brake, waiting for beeps, and then returning to neutral.
Instruccions de funcionament
Encès/Apagat
- To power on: Ensure the transmitter is on, then connect the battery to the ESC.
- To power off: Disconnect the battery from the ESC.
Programació de l'ESC
The TOROX 185A ESC is programmable. An optional Hobbywing LED programming card can be used for easier parameter adjustment. Key programmable parameters include:
- Mode d'acceleració: Forward/Reverse (with programmable reverse lockout)
- Fre d'arrossegament: 0-16% adjustment
- Mode de bateria: NiMH/LiPo selection
- LiPo Cut-off Voltage: Programmable to protect LiPo batteries from over-discharge.
- Temperatura de protecció tèrmica: Estableix a 105 °C o 125 °C.
- BEC Voltage: 6V o 7.4V.
Refer to the specific programming card manual for detailed instructions on how to change these settings.
Manteniment
- Neteja: Regularly clean the ESC and cooling fan to remove dirt and debris. Use a soft brush or compressed air.
- Inspeccions: Inspeccioneu periòdicament tots els cables i connectors per detectar signes de desgast, danys o connexions soltes.
- Emmagatzematge: Guardeu l'ESC en un lloc sec i fresc, allunyat de la llum solar directa i de temperatures extremes.
- Protecció de l'aigua: While this ESC features water protection, it is not designed for prolonged submersion. Always dry the unit thoroughly after exposure to moisture.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'ESC no s'encén. | Bateria no connectada, baix volum de bateriatage, connexió defectuosa. | Check battery connection, charge battery, inspect wires. |
| Motor not responding. | Incorrect calibration, motor wires loose, receiver not connected. | Recalibrate ESC, check motor and receiver connections. |
| L'ESC s'escalfa massa. | Poor ventilation, motor/gear ratio too high, incorrect timing. | Improve airflow, adjust gear ratio, check motor timing. |
| Funcionament erràtic. | Radio interference, loose connections, damaged sensor wire. | Check radio system, secure all connections, inspect sensor wire. |
Especificacions
| Paràmetre | Valor |
|---|---|
| Model | COR54011 (C-54011) |
| Màx. Corrent continu | 185 A |
| Max. Burst Current | 950 A |
| Entrada Voltage (LiPo) | 2-6S (11.1-22.2 V) |
| Entrada Voltage (NiMH) | 9-18 Cell |
| Límit del motor (4S LiPo) | 3000 Kv (5892 size motor) |
| Límit del motor (6S LiPo) | 2400 Kv (5892 size motor) |
| BEC Voltage | 6V / 7.4V (Programmable) |
| Corrent BEC | 0-25 A |
| Programable | Yes (via optional Hobbywing LED card) |
| Protecció tèrmica | 105°C / 125°C (Programmable) |
| Protecció de l'aigua | Sí |
| Ventilador de refrigeració | 30x30x10 mm |
| Connector del motor | 6.5 mm female |
| Connector de bateria | Connector XT90 |
| Mida del cable de la bateria | 10 AWG |
| Ús recomanat | 1/8th scale RC vehicles |
| Pes | Aprox. 250 g (0.55 lliures) |
Garantia i Suport
For warranty information and technical support, please contact Corally customer service or visit their official weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
Nota: Els termes de garantia específics poden variar segons la regió i el distribuïdor.
