Introducció
This manual provides detailed instructions for the assembly, operation, and maintenance of your AC Infinity CLOUDLAB 844 Advance Grow Tent. Please read this manual thoroughly before setup and use to ensure proper function and longevity of your product. The CLOUDLAB 844 is designed for indoor plant cultivation, featuring robust construction and optimized environmental control capabilities.
Informació important de seguretat
- Always assemble the tent on a flat, stable surface.
- Do not overload the hanging bars. The maximum weight limit is 150 lbs (68 kg).
- Ensure all electrical components (lights, fans, controllers) are properly installed and grounded according to their respective manuals and local electrical codes.
- Keep the tent away from open flames, heaters, or other heat sources.
- Do not use abrasive cleaners or solvents on the tent material.
- Periodically inspect the tent for any signs of wear or damage, especially zippers and seams.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge:
- Grow Tent Canvas (2000D Mylar)
- Steel Pole Frame Set (1-inch thick poles)
- Connectors de cantonada
- Hanging Bars (3 + 1 extra)
- Safata de terra extraïble resistent a l'aigua
- Controller Mounting Plate
- Bossa d'eines
- Instruccions de muntatge
Image: Illustration of the AC Infinity CLOUDLAB 844 grow tent components, including poles, connectors, canvas, and accessories.
Muntatge i muntatge
Follow these steps to assemble your AC Infinity CLOUDLAB 844 Grow Tent. It is recommended to have two people for easier assembly.
- Prepara la zona: Clear a space of at least 48" x 48" x 80" (122cm x 122cm x 203cm) for assembly. Ensure the floor is clean and level.
- Muntar el marc base: Connect the shortest poles with the corner connectors to form the base square (48" x 48"). Ensure all poles are securely clicked into place.
- Install Vertical Poles: Attach the vertical poles to each corner of the base frame.
- Muntar el marc superior: Connect the remaining shortest poles with the corner connectors to form the top square. Carefully lift and attach this top frame to the vertical poles.
- Drape the Tent Canvas: Unfold the tent canvas and drape it over the assembled frame. Start from the top and pull it down over the sides. Ensure the zippers are aligned correctly.
- Secure the Canvas: Fully zip up the tent. Adjust the canvas to ensure it fits snugly around the frame.
- Instal·leu barres penjants: Insert the hanging bars into the designated loops or hooks inside the tent. These provide support for lights, fans, and other equipment. The tent includes 3 main hanging bars and 1 extra.
- Place Floor Tray: Position the removable water-resistant floor tray inside the tent.
- Mount Controller Plate: Attach the controller mounting plate to the exterior of the tent in the desired location. This plate allows for secure mounting of AC Infinity controllers and provides a light-proof passthrough for cables.
Image: Fully assembled AC Infinity CLOUDLAB 844 grow tent, showcasing its structure and features.
Image: Close-up of the controller mounting plate on the AC Infinity CLOUDLAB 844, showing cable management.
Instruccions de funcionament
Zippers and Access
The CLOUDLAB 844 features smooth, jam-free SBS zippers with inner flaps to ensure a light-proof seal. To access the interior, simply unzip the main door. The taller windows provide a full view of your plants without needing to open the main door, helping to maintain internal climate control.
Imatge: View of the large zipper window on the AC Infinity CLOUDLAB 844, allowing observation of plants.
Duct Ports and Ventilation
The tent is equipped with multiple double-cinched duct ports (4x 4-inch, 5x 8-inch) for connecting ventilation systems, humidifiers, heaters, and air conditioners. Ensure all unused ports are tightly cinched to prevent light leaks and maintain environmental control.
Image: Illustration highlighting the various duct ports on the AC Infinity CLOUDLAB 844 for ventilation and accessory integration.
Integració del controlador
Utilize the integrated controller mounting plate to securely attach your AC Infinity smart controller. This provides an easy-to-access location for programming and monitoring your grow devices, with a light-proof passthrough for cables.
Manteniment
- Cleaning the Canvas: Wipe down the exterior and interior Mylar lining with a damp drap i sabó suau si cal. Eviteu productes químics agressius.
- Cleaning the Floor Tray: The removable floor tray is stain-resistant and easy to clean. Remove it periodically to empty any spills and wipe clean.
- Cura de la cremallera: Keep zippers free of debris. If they become stiff, a small amount of zipper lubricant can be applied.
- Inspecció del marc: Periodically check all pole connections to ensure they remain secure.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Fuites de llum | Zippers not fully closed, duct ports not cinched, minor manufacturing variations. | Ensure all zippers are fully closed and inner flaps are properly aligned. Tighten all duct port drawstrings. Inspect seams for any small gaps and reinforce with light-blocking tape if necessary. |
| Difficulty Zipping | Debris in zipper teeth, canvas tension, zipper wear. | Clean zipper teeth. Ensure the tent canvas is not overly stretched or misaligned. Apply a small amount of zipper lubricant. |
| Inestabilitat del marc | Poles not fully connected, uneven surface, overloaded hanging bars. | Verify all poles are securely clicked into their connectors. Ensure the tent is on a flat, level surface. Do not exceed the recommended weight limit for hanging bars. |
| Water Accumulation on Floor | Spills, condensation, overwatering. | The removable floor tray is designed to contain spills. Empty and clean the tray regularly. Ensure proper ventilation to reduce condensation. Adjust watering practices. |
Especificacions
- Model: AC-CBA844
- Dimensions: 48" de llargada x 48" d'amplada x 80" d'alçada (122 cm x 122 cm x 203 cm)
- Material del marc: 1-inch Thick Alloy Steel
- Material exterior: 2000D Waterproof Oxford Canvas
- Material interior: 100% Reflective Mylar
- Weight Limit (Hanging Bars): 150 lliures (68 kg)
- Duct Ports: 4x 4-inch, 5x 8-inch (Double-cinched)
- Tipus de cremallera: SBS Zippers with inner flaps
- Característiques: Controller Mounting Plate, Taller Viewing Windows, Removable Water-Resistant Floor Tray, Tool Bag, Reinforced Corners.
- Pes de l'article: 43.7 lliures (19.86 kg)
- UPC: 819137021570
Image: Diagram illustrating the multi-layered construction of the AC Infinity CLOUDLAB 844 tent canvas, including 2000D Oxford, lightproof layer, and reflective Mylar.
Garantia i Suport
AC Infinity products are designed for durability and performance. The CLOUDLAB 844 Grow Tent typically comes with a 3-year manufacturer's warranty, covering defects in materials and workmanship. For warranty claims, technical support, or replacement parts, please contact AC Infinity customer service directly.
Visit the official AC Infinity weblloc web per obtenir la informació d'assistència i les dades de contacte més actualitzades: www.acinfinity.com
