1. Introducció
The tiiwee A1 Wireless Home Security Alarm System is designed to provide effective protection against intruders for your home, apartment, garage, garden shed, RV, or caravan. This system is easy to install, requiring no complex wiring or drilling, and can be set up in minutes. It features a powerful 120 dB siren to deter potential threats and can be expanded with additional tiiwee accessories.
Image 1.1: The tiiwee A1 system is suitable for various applications including homes, garages, garden sheds, and mobile homes.
2. Contingut del paquet
Si us plau, comproveu el paquet per assegurar-vos que hi hagi tots els components:
- 1x tiiwee A1 Wireless Siren with 4 Zone Lights
- 2x Wireless Door/Window Sensors (magnetic contact)
- 1x Wireless Remote Control with button protection
- AAA Batteries (for siren and sensors)
- Mounting accessories (screws, adhesive pads)
- Manual d'usuari
Image 2.1: Components included in the tiiwee A1 Essential Home Security Alarm Kit.
3. Components del producte
3.1. A1 Wireless Siren
The main unit of the alarm system. It emits a loud 120 dB alarm sound and features indicator lights for different zones. It also functions as a doorbell chime.
3.2. Wireless Door/Window Sensors
These two-part magnetic sensors detect when a door or window is opened. When separated, they send a signal to the A1 siren.
3.3. Control remot sense fil
Used to arm, disarm, and switch modes of the A1 siren. It features a sliding cover to prevent accidental button presses.
4. Configuració
4.1. Instal·lació de la bateria
The A1 siren and door/window sensors require AAA batteries. The remote control uses a different type of battery, typically a coin cell, which is usually pre-installed or included.
- A1 Siren: Open the battery compartment on the back of the siren. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment.
- Sensors de porta/finestra: Slide open the cover of each sensor. Insert the required AAA batteries, observing polarity. Close the cover.
- Comandament a distància: The battery is typically pre-installed. If replacement is needed, refer to the specific instructions for the remote control.
4.2. Pairing Components (Pre-connected)
The components in your tiiwee A1 kit are pre-connected at the factory. No manual pairing is required for initial setup. If you purchase additional accessories, refer to the 'System Expansion' section for pairing instructions.
4.3. Instruccions de muntatge
The system can be mounted using screws or the provided adhesive pads.
- A1 Siren: Choose a central location within your property, ensuring it is audible throughout. Mount it securely using screws or adhesive pads.
- Sensors de porta/finestra: Install the two parts of each sensor on the door/window frame and the moving part (door/window) itself. Ensure the two parts are aligned and within 1 cm of each other when the door/window is closed.
Imatge 4.1: Ex.ample of magnetic sensor installation on a door.
5. Instruccions de funcionament
5.1. Armament i desarmament del sistema
Use the remote control to manage the alarm system:
- Braç: Premeu el botó Bloqueig button on the remote control. The siren will emit a confirmation sound, and the system will be armed. Any triggered sensor will activate the alarm.
- Desarma: Premeu el botó Desbloqueja button on the remote control. The siren will emit a confirmation sound, and the system will be disarmed.
5.2. Switching Between Alarm and Chime Mode
The A1 siren can function as a loud alarm or a gentle doorbell chime. To switch modes:
- Ensure the A1 siren is disarmed (unlocked).
- Premeu el botó S. button on the remote control. The siren will cycle between the alarm sound and the chime sound. Select your desired mode.
- The selected mode will remain active until changed again.
5.3. Botó de pànic
En cas d'emergència, premeu el botó Campana button on the remote control to immediately trigger the siren's alarm, regardless of the system's armed status.
6. Expansió del sistema
The tiiwee A1 system is expandable. You can add more door/window sensors, motion detectors (indoor/outdoor), additional remote controls, and outdoor sirens from the tiiwee Home alarm range.
6.1. Pairing New Accessories
To pair a new accessory (e.g., an additional sensor or remote) with your A1 siren:
- Put the A1 siren into learning mode (refer to the siren's specific instructions for this, usually involves pressing a button on the siren).
- Activate the new accessory (e.g., separate the magnetic parts of a sensor, press a button on a remote).
- The A1 siren will emit a confirmation sound, indicating successful pairing.
Image 6.1: The tiiwee A1 system can be expanded with various accessories to cover an entire property.
Imatge 6.2: acabatview of compatible tiiwee accessories for system expansion.
7. Manteniment
7.1. Substitució de la bateria
The A1 siren and sensors are powered by AAA batteries, which typically have a long lifespan (approximately 10 months). When batteries are low, the siren or sensor may indicate this with a specific light or sound pattern (refer to specific device indicators).
- Open the battery compartment of the device requiring new batteries.
- Traieu les piles velles i elimineu-les de manera responsable.
- Introduïu piles AAA noves, assegurant-vos de la polaritat correcta.
- Tanqueu el compartiment de la bateria.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Siren does not activate. | Low batteries in siren or sensor. System is disarmed. Sensor not properly aligned or too far apart. | Replace batteries. Arm the system using the remote. Check sensor alignment and distance. |
| El comandament a distància no funciona. | Low battery in remote. Remote out of range. | Replace remote control battery. Move closer to the siren. |
| Falses alarmes. | Sensor improperly installed or loose. Environmental factors (e.g., strong vibrations). | Re-secure or re-align sensors. Ensure sensors are not in areas prone to false triggers. |
| Cannot pair new accessories. | Siren not in learning mode. Accessory not activated during pairing window. | Ensure siren is in learning mode. Activate accessory immediately after putting siren in learning mode. |
9. Especificacions
- Marca: tiiwee
- Model: A1 (TWHAK01V2)
- Fabricant: Tiiwee B.V.
- Dimensions del producte: 9.7 x 4.4 x 2 cm
- Pes: 430 grams (total package)
- Color: Blanc
- Font d'alimentació: Funciona amb bateria
- Bateries necessàries: AAA (for siren and sensors)
- Durada de la bateria: Aproximadament 10 mesos
- Voltage: 1.5 Volts
- Mètode d'instal·lació: DIY Wireless
- Nivell de so: 120 decibels
- Tecnologia de connectivitat: Sense fil
- Mètode de control: Control remot
10. Garantia i Suport
10.1. Informació de la garantia
The tiiwee A1 Wireless Home Security Alarm System comes with a 2 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació i garanteix que el producte funcioni tal com està previst en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
10.2. Política de devolució
A 30-day return policy for refund or replacement is typically offered from the date of purchase. Please refer to your retailer's specific return policy for detailed terms and conditions.
10.3. Atenció al client
For technical assistance, troubleshooting, or warranty inquiries, please contact tiiwee customer support through the retailer's platform or the official tiiwee website. Please have your model number (A1 or TWHAK01V2) and purchase details ready.
