1. Introducció
This manual provides detailed instructions for the installation, configuration, and operation of your D-Link DGS-1100-05V2 Managed Smart Switch. This 5-port Gigabit switch offers advanced Layer 2 functionality, including VLAN support, Quality of Service (QoS), and 802.3az Energy Efficient Ethernet (EEE), making it suitable for small to medium-sized enterprise networks.
2. Contingut del paquet
Comproveu que el vostre paquet contingui els elements següents:
- DGS-1100-05V2 5-Port Gigabit Managed Smart Switch
- Adaptador d'alimentació
- Mounting Kit (if applicable)
- Guia d'instal·lació ràpida
If any items are missing or damaged, please contact your local D-Link reseller for assistance.
3. Producte acabatview
3.1 Tauler frontal
Figura 1: Davant view of the DGS-1100-05V2 switch. This image displays the five Gigabit Ethernet ports, each with Link/Act and speed indicators, and the power LED.
The front panel of the DGS-1100-05V2 features five 10/100/1000 Mbps Gigabit Ethernet ports. Each port includes two LED indicators: a Link/Act LED (green) and a Speed LED (yellow for 1000 Mbps, orange for 10/100 Mbps). A power LED indicates the device's operational status.
3.2 Panell posterior
Figura 2: posterior view of the DGS-1100-05V2 switch. This image shows the DC power input (5V===1A), the recessed Reset button, and the SWITCH GND screw for grounding.
The rear panel includes the DC power input (5V===1A), a recessed Reset button for restoring factory defaults, and a grounding screw (SWITCH GND) for enhanced electrical safety.
4. Configuració
4.1 Instal·lació física
- Col·locació: Position the switch on a flat, stable surface or mount it using the provided kit. Ensure adequate ventilation around the device.
- Connexió d'alimentació: Connect the provided power adapter to the DC power input on the rear panel of the switch, then plug the adapter into a suitable power outlet.
- Connexions de xarxa: Connect your network devices (computers, servers, access points, etc.) to the Gigabit Ethernet ports on the front panel using standard Ethernet cables (Cat5e or higher recommended).
- Grounding (Optional but Recommended): For enhanced safety, connect a grounding wire to the SWITCH GND screw on the rear panel and to a proper earth ground.
4.2 Configuració inicial
The DGS-1100-05V2 is a managed switch, allowing for advanced configuration via a web-based interface or the D-Link Network Assistant Utility.
- Connect to the Switch: Ensure your computer is connected to one of the switch's Ethernet ports.
- Obtenir l'adreça IP: By default, the switch may obtain an IP address via DHCP. If no DHCP server is present, it will use a default static IP address (refer to the Quick Installation Guide for the specific default IP).
- Accés Web Interfície: Obre a web browser on your computer and enter the switch's IP address in the address bar. Log in using the default credentials (typically admin/admin, or as specified in the Quick Installation Guide).
- D-Link Network Assistant Utility: Alternatively, download and install the D-Link Network Assistant Utility from the D-Link support website. This utility can discover the switch on your network and provide a direct link to its web interfície.
It is highly recommended to change the default administrator password immediately after initial login for security purposes.
5. Funcionament de l'interruptor
The DGS-1100-05V2 offers a range of Layer 2 management features to optimize your network performance and security.
5.1 VLAN Support
Virtual Local Area Networks (VLANs) allow you to logically segment your network into separate broadcast domains. This can improve network security, reduce broadcast traffic, and simplify network management. The DGS-1100-05V2 supports 802.1Q tag-based VLANs and port-based VLANs. This feature is particularly useful for isolating different types of traffic, such as IP surveillance video streams, ensuring their priority and quality.
5.2 Qualitat de servei (QoS)
QoS allows you to prioritize network traffic, ensuring that critical applications (e.g., VoIP, video conferencing) receive sufficient bandwidth and minimal delay. The switch supports 802.1p CoS (Class of Service) and DSCP (Differentiated Services Code Point) based QoS, enabling you to define traffic priorities and manage bandwidth effectively.
5.3 Snooping IGMP
IGMP (Internet Group Management Protocol) Snooping optimizes multicast traffic delivery. By monitoring IGMP messages, the switch can intelligently forward multicast streams only to ports where devices have explicitly requested them, preventing unnecessary flooding of multicast traffic across the entire network and conserving bandwidth.
5.4 Energy Efficient Ethernet (EEE)
The DGS-1100-05V2 incorporates 802.3az Energy Efficient Ethernet (EEE) technology, also known as D-Link Green features. This allows the switch to automatically detect link status and cable length, adjusting power consumption accordingly. This helps reduce operating costs and environmental impact without compromising performance.
6. Manteniment
6.1 Atenció general
- Mantingueu l'interruptor en un lloc fresc i sec, allunyat de la llum solar directa i de fonts de calor.
- Ensure proper ventilation and avoid blocking the ventilation holes.
- Netegeu l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol.
6.2 actualitzacions de microprogramari
Comproveu periòdicament el suport de D-Link website for firmware updates. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware update package carefully.
6.3 Restabliment de fàbrica
If you encounter persistent issues or forget your login credentials, you can reset the switch to its factory default settings. To do this, use a paperclip or a similar pointed object to press and hold the recessed Reset button on the rear panel for approximately 5-10 seconds while the device is powered on. The switch will reboot with default settings.
7. Solució De Problemes
| Problema | Possible solució |
|---|---|
| No power LED indication. |
|
| No link light for a connected device. |
|
| No es pot accedir a web interfície de gestió. |
|
8. Especificacions
| Característica | Detall |
|---|---|
| Model | DGS-1100-05V2 |
| Nombre de Ports | 5 Gigabit Ethernet (RJ45) |
| Velocitat de transferència de dades | 10/100/1000 Mbps |
| Capacitat de commutació | 10 Gbps |
| Suport de marc jumbo | Fins a 9216 bytes |
| Suport VLAN | 802.1Q Tag-based, Port-based (up to 32 static VLANs) |
| Suport de QoS | 802.1p CoS, DSCP (4 queues per port) |
| Eficiència energètica | 802.3az Energy Efficient Ethernet (EEE) |
| Gestió | Web-based GUI, D-Link Network Assistant Utility |
| Disseny sense ventiladors | Yes (0 dB) |
| Material de la caixa | Metall |
| Dimensions del producte (L x A x A) | 7.87" x 5.91" x 5.91" |
| Pes de l'article | 0.23 quilograms (8.1 unces) |
| Entrada de potència | 5V===1A (DC) |
| Temperatura de funcionament | De 0 °C a 40 °C (32 °F a 104 °F) |
| Temperatura d'emmagatzematge | -40 °C a 70 °C (-40 °F a 158 °F) |
| Humitat de funcionament | 10% a 90% sense condensació |
Note: Specifications are subject to change without notice. Please refer to the official D-Link weblloc per obtenir la informació més actualitzada.
9. Garantia i Suport
9.1 Informació de la garantia
D-Link products are backed by a limited warranty. For specific warranty terms and conditions applicable to your region, please refer to the warranty card included with your product or visit the official D-Link weblloc.
9.2 Suport tècnic
For technical assistance, product documentation, and software downloads, please visit the official D-Link support website. D-Link offers various support resources, including FAQs, troubleshooting guides, and driver downloads.
The D-Link Assist Next Business Day service provides additional peace of mind by replacing defective equipment quickly and efficiently. For details on this service, please consult the D-Link website or contact your local D-Link representative.
Suport de D-Link Weblloc: www.dlink.com/support
