Weber 66047 Control Knob Kit Instruction Manual

1. Introducció

Aquest manual proporciona informació essencial per a la correcta instal·lació, funcionament i manteniment del vostre Weber 66047 3-Piece Control Knob Kit. Please read these instructions thoroughly before proceeding to ensure correct usage and to maintain the longevity of your grill components.

2. Producte acabatview

El Weber 66047 Control Knob Kit consists of three genuine replacement control knobs designed for specific Weber Genesis II grill models. These knobs allow for precise control over the gas flow to your grill's burners, ensuring optimal cooking performance.

Imatge 1: Frontal view de la Weber 66047 control knobs.

3. Compatibilitat

This control knob kit is specifically designed for the following Webmodels de graella:

• 2019 and Newer Weber Genesis II E/ES 310 Series Grills
• 2019 and Newer Weber Genesis II E/ES 610 Series Grills

Each knob has a diameter of 2-3/4 inches and features a 3/8-inch D-shaped hole for shaft connection. Please verify your grill model and existing knob specifications before installation to ensure proper fit.

4. Què hi ha a la caixa

El teu Weber 66047 Control Knob Kit includes:

• 3 x Weber Control Knobs (Part #66047)

5. Configuració i instal·lació

Follow these steps to install your new control knobs:

1. Garantir la seguretat: Before beginning, ensure your grill is completely off and the gas supply is turned off at the propane tank or natural gas line. Allow the grill to cool down if it has been in use.
2. Elimina els botons antics: Gently pull the existing control knobs straight off the valve stems. They are typically held in place by friction.
3. Inspect Valve Stems: Check the valve stems for any debris or damage. Clean them if necessary. The valve stems should be D-shaped to match the opening in the new knobs.
4. Instal·leu els nous botons: Align the D-shaped opening on the back of the new Weber control knob with the D-shaped valve stem on your grill. Push the knob firmly onto the stem until it is seated securely. Ensure the red indicator line on the knob points to the 'OFF' position when the valve is closed.
5. Funcionalitat de prova: Once all knobs are installed, turn on the gas supply. Carefully test each knob by pushing it in and turning it to the 'IGNITE' position to ensure it engages correctly and the burner ignites. Then turn it back to 'OFF'.

Imatge 2: Darrere view of the control knobs, illustrating the D-shaped shaft opening for installation.

Image 3: Grill schematic showing the location of the control knob set (item 27).

6. Instruccions de funcionament

The control knobs regulate the gas flow to the grill burners. To operate:

• Encesa: Push the knob in and turn it to the 'IGNITE' position (usually indicated by a lightning bolt or flame symbol) to light the corresponding burner.
• Ajustar la flama: Once lit, adjust the flame intensity by turning the knob between the 'HIGH' and 'LOW' settings.
• Apagar: To turn off a burner, push the knob in and rotate it to the 'OFF' position.

7. Manteniment

To keep your control knobs in good condition:

• Neteja: Clean the knobs regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Inspecció: Periodically check the knobs for any signs of wear, cracking, or looseness. Replace them if they are damaged or no longer fit securely.

8. Solució De Problemes

If you encounter issues with your control knobs:

• El botó està fluix: Ensure the knob is fully pushed onto the D-shaped valve stem. If it continues to be loose, the internal mechanism may be worn, and replacement is recommended.
• Knob Does Not Turn: Do not force the knob. Ensure it is pushed in completely before attempting to turn. If the issue persists, the valve stem or internal valve mechanism may be obstructed or damaged. Consult a qualified technician or Webel seu suport.

9. Especificacions

10. Garantia i Suport

Weber products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the official Weber weblloc o contacte Weber customer service directly. Keep your proof of purchase for warranty purposes.

Weber Customer Support: Visita Weber Suport