Introducció
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Patriot Lighting Anchors Antique Red 1-Light Vanity Light, model WL25501RC. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Informació de seguretat
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació a la caixa de fusibles o a l'interruptor automàtic abans de la instal·lació o el manteniment.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with electrical wiring.
- Utilitzeu només el tipus de bombeta i la potència recomanatstage especificat per a aquest dispositiu.
- Do not install this fixture in wet locations unless specifically rated for such use.
- Manipuleu els components de vidre amb cura per evitar que es trenquin.
- Ensure all mounting hardware is securely fastened before operating the light.
Contingut del paquet
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Llum de tocador (1)
- Mounting Hardware Kit (includes screws, wire nuts, etc.)
- Installation Instructions Manual (this document)
Note: One medium base bulb is required and is not included with this package.
Especificacions
| Número de model: | WL25501RC |
| Marca: | Il·luminació Patriot |
| Dimensions (L x A x A): | 10.5" x 9" x 11" |
| Material: | Copper, Glass |
| Estil: | Antiguitat |
| Tipus d'acabat: | Acabat coure |
| Color de l'ombra: | Vermell |
| Nombre de fonts de llum: | 1 |
| Tipus de bombeta: | Medium Base (E26) - No inclòs |
| Font d'alimentació: | Elèctric amb cable |
| Tipus de muntatge: | Muntatge de paret |
| Pes de l'article: | 4.99 lliures |
Figure 1: Product Dimensions. This image illustrates the key measurements of the vanity light fixture.
Configuració i instal·lació
Abans de començar: Ensure power is disconnected at the circuit breaker. It is recommended to have a second person assist with installation.
- Prepara la zona: Turn off the main power supply to the junction box where the fixture will be installed. Use a voltagel provador per confirmar que l'alimentació està apagada.
- Muntar la barra transversal: Fixeu la barra transversal de muntatge (inclosa al kit de maquinari) a la caixa de connexions amb els cargols proporcionats. Assegureu-vos que estigui ben fixada.
- Fer connexions elèctriques:
- Connecteu el cable de terra de coure verd o nu des de l'aparell fins a la cable de terra from the junction box (usually bare copper or green). Secure with a wire nut.
- Connecteu el fil blanc des de l'aparell fins a la cable blanc (neutre) from the junction box. Secure with a wire nut.
- Connecteu el filferro negre des de l'aparell fins a la cable negre (calent) from the junction box. Secure with a wire nut.
Ensure all wire connections are tight and no bare wire is exposed.
- Assegureu el dispositiu: Carefully tuck all wires into the junction box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place using the decorative nuts or screws provided.
- Instal·leu la bombeta: Screw one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum wattage indicat a l'aparell.
- Instal·leu l'ombra de vidre: Carefully attach the glass shade to the fixture according to the specific design. Ensure it is secure.
- Restaura l'alimentació: Turn the main power supply back on at the circuit breaker. Test the light fixture.
Figure 2: Vanity Light Fixture Detail. This image shows the design and finish of the light.
Figure 3: Installed Vanity Lights. This image provides an example of the fixture installed in a bathroom setting.
Instruccions de funcionament
Once properly installed and powered, the Patriot Lighting Anchors Antique Red 1-Light Vanity Light operates via your standard wall switch. Simply toggle the wall switch to turn the light on or off.
Manteniment
- Neteja: Always disconnect power before cleaning. To clean the fixture, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
- Substitució de bombetes: Disconnect power before replacing the bulb. Allow the bulb to cool completely before touching. Unscrew the old bulb and replace it with a new medium base (E26) bulb of the correct wattage.
- Inspecció: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| La llum parpelleja. |
|
|
Garantia i Suport
This Patriot Lighting product is covered by a 5 any de garantia del fabricant des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims, technical support, or replacement parts, please contact Patriot Lighting customer service. Keep your proof of purchase for warranty validation.
For more information or to explore other Patriot Lighting products, visit the official Patriot Lighting Store on Amazon.
