1. Acabatview
This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.
2. Característiques del producte
- Reconeixement biomètric d'empremtes dactilars: Securely unlock with your fingerprint. Supports up to 10 registered users.
- Construcció duradora: Made from stainless steel and zinc alloy for enhanced security.
- Resistent a la intempèrie: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
- Bateria de llarga durada: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
- Càrrega USB-C: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
- Disseny elegant: Designed by Guillaume Delvigne, available in multiple colors.
Image: The LEXON Nomaday Lock showcasinel seu disseny i els colors disponibles.
3. Contingut del paquet
- LEXON LL128N Fingerprint Padlock
- Cable de càrrega USB-C
- Manual d'usuari
4. Configuració
4.1 Initial Fingerprint Registration (Administrator)
Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.
- Press and hold your finger on the fingerprint sensor until the llum blava illuminates. Release your finger.
- El llum verda will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
- Mentre que el llum verda is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.
After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.
Video: Demonstrates the process of setting up administrator fingerprints on the padlock.
4.2 Registering Additional Fingerprints (Users 3-10)
To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.
- Manteniu premuda una dit administrador on the sensor until the llum blava illuminates. Release the finger.
- El llum verda will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.
Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.
4.3 Deleting All Fingerprints (Factory Reset)
To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:
- Place an dit administrador on the sensor and hold it. The llum blava will illuminate, then turn vermell. Continue holding.
- After the red light illuminates, the llum verda will flash once. Release your finger immediately after the green light flashes.
All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.
5. Instruccions de funcionament
5.1 Desbloqueig del cadenat
To unlock the padlock, simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.5 seconds if the fingerprint is recognized.
Image: A hand demonstrating the unlocking process by placing a finger on the sensor.
Video: Shows the quick unlocking action of the fingerprint padlock.
5.2 Bloqueig del cadenat
To lock the padlock, simply push the shackle down until it clicks into place. The padlock will automatically lock.
6. Charging the Padlock
The LEXON LL128N Padlock is equipped with a rechargeable Lithium-ion battery. When the battery is low, the indicator light will flash red. To charge:
- Locate the USB-C charging port, usually covered by a protective cap.
- Connect the provided USB-C cable to the padlock and to a standard USB power source (e.g., computer, wall adapter).
- El llum indicador mostrarà l'estat de càrrega (per exemple, vermell per a la càrrega, verd per a la càrrega completa).
A full charge takes approximately 1.5 hours and provides power for up to 3000 unlocks or 12 months of standby time.
7. Manteniment
- Neteja: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Sensor d’empremta digital: Mantingueu el sensor d'empremtes dactilars net i sec per a un rendiment òptim.
- Port de càrrega: Ensure the USB-C charging port is free from dust and debris. Keep the protective cap closed when not charging.
- Emmagatzematge: Store the padlock in a cool, dry place when not in use for extended periods.
Image: The padlock demonstrating its IP65 waterproof capabilities, suitable for various environments.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Padlock does not unlock with registered fingerprint. |
|
|
| Cannot register new fingerprints. |
|
|
| Padlock does not charge. |
|
|
9. Especificacions
| Marca | LÈXON |
| Número de model | LL128N |
| Tipus de bloqueig | Biometric Fingerprint Padlock |
| Material | Stainless Steel / Zinc Alloy |
| Dimensions (L x A x A) | 1.4 x 3.18 x 7.59 cm |
| Pes | 81.6 g |
| Classificació impermeable/resistent a la pols | IP65 |
| Max empremtes dactilars | 10 |
| Tipus de bateria | Ió de liti |
| Port de càrrega | USB-C |
| Temps de càrrega | Aprox. 1.5 hores |
| Unlocks per Charge | Fins a 3000 |
| Temps d'espera | Fins a 12 mesos |
Image: A visual representation of the product's technical specifications.
10. Garantia i Suport
The LEXON LL128N Fingerprint Padlock comes with a Garantia del fabricant de 1 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims or technical support, please contact your retailer or visit the official LEXON weblloc web per a informació d'atenció al client.
