1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Onforu 100W 14000lm LED Shop Lights. Please read this manual thoroughly before use and retain it for future reference.
2. Informació de seguretat
Seguiu sempre les precaucions bàsiques de seguretat per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Assegureu-vos que l'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
- Do not look directly into the LED light when it is on, as it may cause eye damage.
- Mantenir el producte allunyat de materials inflamables.
- This product is IP66 waterproof, suitable for outdoor use, but avoid submerging it in water.
- Si no esteu segurs, la instal·lació l'ha de dur a terme un electricista qualificat.
- Assegureu-vos que la superfície de muntatge pugui suportar el pes de l'aparell.
3. Contingut del paquet
Verifiqueu que tots els components estiguin presents i no estiguin danyats en obrir l'envàs:
- LED Shop Light (2 units)
- Lamp Brackets (2 pairs)
- M6 Hex Screw Key (1 unit)
- M6 Screws (2 units)
- Plastic Expansion Nails (2 units)
- Screws for Mounting (2 units)
- Additional connectors for linking (as shown in assembly video)
4. Configuració i instal·lació
The Onforu LED Shop Lights are designed for easy installation and can be mounted in various configurations (wall, ground, or ceiling) and can also be linked horizontally or vertically.
4.1 Single Unit Installation
- Col·loca els suports: Assegureu la lamp brackets to the sides of the LED light fixture using the provided M6 screws and hex key. Do not overtighten initially to allow for angle adjustment.
- Muntar l'aparell: Choose your desired mounting location (wall, ground, or ceiling). Use the plastic expansion nails and mounting screws to firmly attach the brackets to the surface.
- Ajust d'angle: Once mounted, adjust the angle of the light fixture to direct illumination as needed. The fixture allows for 180° adjustment. Tighten the M6 screws on the brackets to secure the angle.
- Connectar l'alimentació: Plug the power cord into a standard 120V AC outlet. The light features an in-line switch for convenient power control.
Vídeo 1: Una breu introduccióview demonstrating the installation process and adjustable features of the Onforu LED Flood Light.
4.2 Enllaçar diverses unitats
The lights can be connected horizontally or vertically to create a longer or wider lighting solution. Use the provided connectors and hex key to secure the units together.
- Horizontal Connection: Align two light units side-by-side. Use the small connecting brackets and screws to join them securely. Ensure the power cables are routed appropriately.
- Vertical Connection: Align two light units one above the other. Use the small connecting brackets and screws to join them securely.
Video 2: An official product video from Onforu demonstrating the various installation methods, including linking multiple units horizontally and vertically, and showcasing the included hardware.
5. Instruccions de funcionament
Operating your Onforu LED Shop Light is straightforward:
- Once installed and plugged into a power outlet, locate the in-line switch on the power cord.
- Press the switch to turn the light ON.
- Press the switch again to turn the light OFF.
6. Manteniment
To ensure optimal performance and longevity of your LED Shop Lights:
- Neteja: Periodically clean the glass cover with a soft, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar la superfície.
- Inspecció: Regularly check the power cord and plug for any signs of damage. Ensure all mounting screws remain tight.
- Dissipació de calor: The fixture is designed with a fin-type heat sink. Ensure it is not obstructed to allow for efficient heat dissipation.
7. Solució De Problemes
If you encounter issues with your LED Shop Light, refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power supply; faulty switch; loose connection. | Check if the plug is securely inserted and the power outlet is functional. Ensure the in-line switch is ON. Inspect the power cord for damage. |
| La llum parpelleja. | Font d'alimentació inestable; connexió fluixa. | Ensure the power supply is stable. Check all connections for tightness. |
| Lluentor reduït. | Dirt or debris on the glass cover. | Clean the glass cover with a soft, damp tela. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Onforu |
| Número de model | CT08 |
| Wattage | 100 watts |
| Brillantor | 14000 lumens |
| Temperatura de color | 6500 Kelvin (blanc llum del dia) |
| Material | Alumini, Vidre temperat |
| Nivell de resistència a l'aigua | Impermeable IP66 |
| Dimensions del producte | 15.27 cm de llargada x 3.46 cm d'amplada x 1.37 cm d'alçada |
| Angle del feix | 120° |
| Característica especial | With Plug, Thick die-cast aluminum, Waterproof, Not Dimmable |
9. Garantia i Suport
Onforu products come with a limited warranty. For specific warranty details or technical support, please refer to the official Onforu weblloc o contacteu amb el servei d'atenció al client.
Els plans de protecció opcionals es poden comprar per separat:
- Pla de protecció de 3 anys
- Pla de protecció de 4 anys
- Protecció completa (subscripció mensual)
Per obtenir més ajuda, visiteu el Botiga Onforu a Amazon.
