Introducció
Thank you for choosing the BONTEC Single Monitor Arm MDM001C. This monitor arm is designed to enhance your workspace ergonomics and free up valuable desk space by securely mounting your LCD/LED monitor. It offers versatile adjustments including height, tilt, swivel, and rotation to provide an optimal viewing experience. Please read this manual carefully before installation and use to ensure safe and correct operation.
Informació de seguretat
- Llegeix totes les instruccions: Before assembly and installation, read the entire instruction manual. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Capacitat de pes: No supereu la capacitat màxima de pes de 8 kg (18 lliures). Overloading may result in serious injury or property damage.
- Mida del monitor: This monitor arm is suitable for screens between 13 i 32 polzades.
- Compatibilitat VESA: Assegureu-vos que el monitor tingui patrons de muntatge VESA de 75x75mm o 100x100mm.
- Gruix de l'escriptori: Verify your desk thickness is within the specified ranges: 10-100mm for C-clamp i 10-80mm for grommet installation.
- Instal·lació segura: Ensure all screws and connections are tightened securely before use. Do not overtighten.
- Nens: Mantingueu els nens allunyats durant el muntatge. Les peces petites poden ser un perill d'asfíxia.
- Punts de pinçament: Be aware of potential pinch points during adjustment to avoid injury.
Contingut del paquet
Please check that all components are present and undamaged. If any parts are missing or damaged, contact BONTEC customer support.
- Conjunt del braç del monitor
- Pal d'escriptori
- C-Clamp Base
- Components de la base del grommet
- Placa VESA desmuntable
- Mounting Hardware (Screws, Washers, Spacers)
- Allen Keys for Assembly and Adjustment
- Clips de gestió de cables
Especificacions del producte
| Número de model | MDM001C |
| Mida de pantalla compatible | 13 - 32 polzades |
| Capacitat de pes | Fins a 8 kg |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Interval d'ajust d'altura | 0 - 425 mm |
| Extensió del braç | Fins a 340 mm |
| Angle d'inclinació | +/- 90 graus |
| Angle de gir | 360 degrees (VESA plate), 180/240 degrees (arm joints) |
| Rotació | 360 graus |
| Escriptori Clamp Gruix | 10 - 100 mm |
| Gruix de la base del grommet | 10 - 80 mm |
| Material | Metall |
Imatge: Dimensions del producte i especificacions clau.
Instruccions de configuració
Follow these steps to assemble and install your BONTEC monitor arm.
Pas 1: Trieu el mètode de muntatge
Your monitor arm offers two installation options: Desk Clamp or Grommet Base. Select the method suitable for your desk.
1. Escriptori Clamp Instal·lació
- Enganxeu el C-clamp to the bottom of the desk pole using the provided screws.
- Col·loca el clamp on the edge of your desk. Ensure the desk thickness is between 10mm and 100mm.
- Apretar el clamp screw firmly until the pole is securely fixed to the desk.
2. Instal·lació de la base del grommet
- If your desk has a grommet hole (diameter 10mm-80mm), insert the grommet base through the hole.
- From underneath the desk, secure the base using the provided support plate and tightening nut. Ensure the desk thickness is between 10mm and 80mm.
Image: Desk clamp and grommet base installation options.
Step 2: Attach Monitor Arm to Pole
Slide the monitor arm assembly onto the installed desk pole. Adjust it to your desired initial height and tighten the securing bolt on the arm collar using an Allen key to hold it in place.
Pas 3: Fixeu la placa VESA al monitor
- Carefully remove the detachable VESA plate from the monitor arm by sliding it upwards.
- Align the VESA plate with the mounting holes on the back of your monitor. Use the appropriate screws (M4 or M5, typically provided) and washers to secure the plate to the monitor. Do not overtighten.
Image: Detachable VESA plate for easy monitor attachment.
Pas 4: Muntar el monitor al braç
With the VESA plate securely attached to your monitor, carefully slide the monitor (with the plate) back onto the VESA head of the monitor arm. Ensure it clicks into place and then tighten the locking screw to prevent accidental detachment.
Pas 5: Gestió de cables
Route your monitor's power and video cables through the integrated cable clips located along the arm and down the pole. This helps maintain a tidy and organized workspace.
Image: Cable management system and Allen key storage.
Instruccions d'ús (ajustos)
The BONTEC monitor arm offers various adjustments to customize your viewexperiència.
- Ajust d'alçada: To adjust the monitor's height, loosen the securing bolt on the arm collar on the main pole. Slide the arm up or down to the desired position, then re-tighten the bolt firmly. The arm allows for up to 425mm of height adjustment.
- Ajust d'inclinació: To change the vertical angle of your monitor (up or down), loosen the tilt bolt located on the VESA plate. Adjust the monitor to your preferred tilt angle (+/- 90 degrees) and then re-tighten the bolt.
- Ajust de gir: The monitor arm features multiple joints that allow for horizontal swivel. The arm joints can swivel 180 and 240 degrees, while the VESA plate itself can swivel a full 360 degrees, allowing you to position your monitor precisely.
- Ajust de rotació: The VESA plate allows for 360-degree rotation, enabling you to easily switch your monitor between landscape and portrait orientations without removing it.
Image: Height adjustment mechanism.
Image: Tilt adjustment detail.
Image: Arm swivel articulation.
Image: Monitor rotation at VESA plate.
Imatge: Més deview of monitor arm adjustment capabilities.
Manteniment
- Comprovacions periòdiques: Periodically check all screws, bolts, and connections to ensure they remain tight and secure. Re-tighten if necessary.
- Neteja: Clean the surface of the monitor arm with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- Lubricació: No lubrication is required for the moving parts.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Monitor is unstable or sagging. | Mounting bolts are loose; monitor weight exceeds capacity. | Ensure all bolts, especially the tilt and arm joint bolts, are securely tightened. Verify your monitor's weight does not exceed 8 kg (18 lbs). |
| Difficulty adjusting monitor height or movement. | Adjustment bolts are too tight. | Slightly loosen the relevant adjustment bolts (e.g., on the pole collar for height, or arm joints for swivel) using the provided Allen keys. Adjust, then re-tighten to prevent unwanted movement. |
| Cables do not fit into management clips. | Cables are too thick or routed incorrectly. | Ensure cables are routed individually and correctly through the clips. Do not force thick bundles of cables into clips. Consider using thinner cables if necessary. |
| Monitor cannot be rotated to portrait/landscape. | Rotation mechanism is stiff or locked. | Ensure no cables are obstructing the rotation. The VESA plate allows 360-degree rotation; apply gentle, even pressure. |
Informació de la garantia
This BONTEC product comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, coverage, and duration, please refer to the warranty card included in your product packaging. Alternatively, you may visit the official BONTEC weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client per obtenir la política de garantia més actualitzada.
Atenció al client
Should you require technical assistance, have questions about assembly, or need to report missing or damaged parts, please contact BONTEC customer support. You can typically find contact information (email, phone, or support portal) on the BONTEC official website or within the product documentation provided with your monitor arm.
