Introducció
This manual provides detailed instructions for the safe and effective use of your Feit Electric WORK6000XLTPPLUG 60W Portable LED Work Light. Please read all instructions carefully before assembly, operation, or maintenance to ensure proper function and safety.
Instruccions importants de seguretat
Observe the following safety precautions to reduce the risk of fire, electric shock, or injury.
- Always disconnect the power supply before attempting any installation, maintenance, or cleaning.
- Ensure the power cord is not damaged or pinched. Do not operate the light with a damaged cord.
- This product is rated IP65 waterproof for outdoor use, but avoid submerging it in water.
- Do not look directly into the LED light source when illuminated, as it may cause eye strain or damage.
- Keep the work light away from flammable materials.
- Assegureu-vos que el trípode estigui col·locat sobre una superfície estable i anivellada per evitar que bolqui.
- Do not attempt to modify or repair the unit yourself. Contact qualified service personnel for assistance.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de continuar amb el muntatge.
- 1 x Feit Electric WORK6000XLTPPLUG Dual-Head LED Work Light
- 1 x Telescoping Tripod Stand
- 1 x Integrated 8 ft. Heavy-Duty Power Cord
Image: Product packaging showing the dual-head work light and tripod stand.
Muntatge i muntatge
- Desempaquetar components: Traieu amb cura tots els articles de l'embalatge.
- Muntatge del trípode: Extend the legs of the tripod stand until they are fully spread and stable.
- Connecteu els capçals de llum: Securely attach the dual-head LED work light assembly to the top of the telescoping tripod stand. Ensure all fasteners are tightened.
- Ajusta l'alçada: Loosen the locking collars on the tripod to extend the telescoping pole to the desired height (up to 45 inches). Tighten the collars firmly to secure the height.
- Position Light Heads: Adjust the angle of each light head as needed.
- Connectar l'alimentació: Plug the 8 ft. heavy-duty power cord into a standard 120V AC outlet.
Image: The Feit Electric WORK6000XLTPPLUG work light fully assembled on its telescoping tripod stand.
Instruccions de funcionament
The Feit Electric WORK6000XLTPPLUG features independently adjustable dual heads for versatile lighting.
- Encès/apagat: Each LED light head has an individual power button located on its back. Press the button to turn the light head on or off.
- Ajusta la direcció de la llum: The dual heads can be independently swiveled and tilted to direct light precisely where needed. Loosen the adjustment knobs, position the light, and then tighten the knobs to secure.
- Ajustar l'alçada del trípode: To change the overall height, loosen the locking collars on the tripod pole, extend or retract the pole, and then firmly tighten the collars.
Imatge: Primer pla view of the dual LED light heads, showing their adjustable nature.
Manteniment i cura
- Neteja: Ensure the light is unplugged and cool before cleaning. Wipe the surfaces with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Emmagatzematge: When not in use, collapse the tripod stand and store the work light in a dry, protected area. The compact design allows for easy transport and storage.
- Inspecció del cable: Periodically inspect the power cord for any signs of damage, cuts, or fraying. If damage is found, discontinue use and replace the cord or unit if necessary.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha corrent a la presa de corrent. El cable d'alimentació està danyat. Light head switch is off. | Comproveu la presa de corrent amb un altre dispositiu. Inspect the power cord for damage; discontinue use if damaged. Ensure the individual power button on the light head is pressed. |
| La llum parpelleja o s'atenua. | Font d'alimentació inestable. Connexió fluixa. | Assegureu-vos que la font d'alimentació sigui estable. Check that the power cord is securely plugged into the outlet. |
| El trípode és inestable. | Legs not fully spread. Locking collars not tightened. Superfície irregular. | Fully extend the tripod legs. Tighten all locking collars on the telescoping pole. Col·loqueu el trípode sobre una superfície plana i estable. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | WORK6000XLTPPLUG |
| Wattage | 60 watts |
| Brillantor | 6000 lúmens |
| Temperatura de color | 5000 Kelvin (llum del dia) |
| Voltage | 120 Volts |
| Ampedat | 0.5 Amps |
| Classificació IP | Impermeable IP65 |
| Material | Aluminum, Polyamide |
| Font d'alimentació | CA (endollable) |
| Longitud del cable | 8 peus. |
| Max Tripod Height | 45 polzades |
| Pes de l'article | 6 lliures |
| Dimensions del producte | 10"L x 3.1"W x 10.5"H (Light heads only) |
| Característiques especials | Dual-Head, Telescoping Tripod, ETL Listed, Impact Resistance |
Garantia i Suport
This Feit Electric WORK6000XLTPPLUG LED Work Light comes with a Garantia limitada d'1 any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims, technical support, or replacement parts, please contact Feit Electric customer service. You can find more information and contact details by visiting the official Feit Electric weblloc web o la seva botiga a Amazon: Botiga elèctrica Feit.
Si us plau, conserveu el comprovant de compra per validar la garantia.
