1. Introducció i finalview
The Bose Professional FreeSpace FS2SE is a high-performance, surface-mount loudspeaker designed for both indoor and outdoor applications. It features a 2.25-inch full-range driver, delivering clear background music and intelligible voice announcements. This manual provides essential information for the proper installation, operation, and maintenance of your FS2SE loudspeakers.
Les característiques clau inclouen:
- Weather-resistant design suitable for various environments.
- 145-degree x 140-degree nominal coverage for consistent sound distribution.
- Combined 70-volt/100-volt and low-impedance operation for versatile system integration.
- Euroblock inputs and front-baffle connectors for simplified installation.
2. Què hi ha a la caixa
Si us plau, verifiqueu que hi hagi tots els components abans de continuar amb la instal·lació:
- Bose Professional FreeSpace FS2SE Surface-mount Loudspeakers (Pair)
- Maquinari de muntatge
3. Configuració i instal·lació
Una instal·lació correcta és crucial per a un rendiment i una seguretat òptims. Es recomana que la instal·lació la realitzi personal qualificat.
3.1 Mounting the Loudspeakers
The FS2SE loudspeakers are designed for surface mounting. Use the provided mounting hardware and follow local building codes and regulations. Ensure the mounting surface can adequately support the weight of the loudspeakers.
Figure 1: Bose FreeSpace FS2SE Surface-mount Loudspeakers. These speakers are designed for discreet installation on walls or ceilings.
3.2 Connexions de cablejat
The FS2SE loudspeakers feature Euroblock inputs and front-baffle connectors for wiring. These connections support both low-impedance (16-ohm) and 70-volt/100-volt transformer taps.
- Low-Impedance Connection: For 16-ohm operation, up to four FS2SE units can be connected to a single low-impedance amplifier line. Consult your amplifier's manual for impedance matching and power requirements.
- 70-Volt/100-Volt Connection: Per a vol constanttage systems, select the appropriate transformer tap setting on the loudspeaker to match the ampVolum de sortida del lifiertage and desired power level.
Ensure all wiring is secure and correctly polarized to prevent damage to the loudspeakers or ampmés viu.
4. Instruccions de funcionament
Once properly installed and connected, operating the FS2SE loudspeakers is straightforward.
4.1 Encendre el sistema
Assegureu-vos el vostre amplifier or audio source is connected and powered on according to its own instructions. The loudspeakers will reproduce audio signals received from the connected ampmés viu.
Reproducció d'àudio 4.2
Adjust the volume and tone controls on your amplifier or audio source to achieve the desired sound. The FS2SE loudspeakers are designed to provide a balanced audio experience across their coverage area.
5. Manteniment
The FS2SE loudspeakers require minimal maintenance to ensure long-term performance.
- Neteja: Gently wipe the exterior surfaces with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive cleaners.
- Consideracions ambientals: While weather-resistant, avoid direct exposure to extreme weather conditions or prolonged submersion in water. Ensure proper drainage if installed outdoors.
- Inspeccions: Periodically check mounting hardware and cable connections for security and signs of wear.
6. Solució De Problemes
If you encounter issues with your FS2SE loudspeakers, refer to the following common troubleshooting steps:
- Sense so:
- Comproveu que el ampel lifier està encès i funciona correctament.
- Check all audio cable connections between the amplifier and loudspeakers for proper seating and polarity.
- Assegureu-vos que la font d'entrada correcta estigui seleccionada al vostre ampmés viu.
- So distorsionat:
- Baixeu el nivell de volum del vostre amplificador o font d'àudio.
- Comproveu si hi ha connexions soltes o cables danyats.
- Assegureu-vos el amplifier's output impedance matches the loudspeaker's connection type (low-impedance or 70V/100V tap).
- So intermitent:
- Inspeccioneu totes les connexions per detectar contacte intermitent.
- Check for any physical obstructions or damage to the speaker cones.
If the issue persists after performing these checks, contact Bose Professional support for further assistance.
7. Especificacions
Detailed technical specifications for the Bose Professional FreeSpace FS2SE Surface-mount Loudspeaker:
| Característica | Especificació |
|---|---|
| Nom del model | FS2SE |
| Tipus d'altaveu | Outdoor, Surface Mount |
| Diàmetre del woofer | 2.25 polzades |
| Potència de sortida màxima dels altaveus | 16 watts |
| Impedància | 16 Ohm (Low-impedance mode) |
| Entrada Voltage | 100 Volts (70V/100V Taps available) |
| Resposta de freqüència | 70 Hz (approximate) |
| Tecnologia de connectivitat | Euroblock, front-baffle connectors |
| Dimensions del producte | 7.5 "P x 7.5" W x 10.2" H |
| Pes de l'article | 9.2 lliures |
| Color | Negre |
| Nivell de resistència a l'aigua | Not Water Resistant (Weather-resistant) |
| Nombre d'articles | 2 (Parell) |
8. Garantia i Suport
The Bose Professional FreeSpace FS2SE Surface-mount Loudspeaker comes with a Limited Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
For technical support, service, or warranty claims, please contact Bose Professional customer service. You can find contact information on the official Bose Professional weblloc web o a través del vostre distribuïdor autoritzat.
