Introducció
The KNOG PWR Trail 1100L is a versatile, modular bike light designed to provide powerful illumination and serve as a portable power bank. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PWR Trail 1100L.
Image: The KNOG PWR Trail 1100L bike light, showcasing its main body, light head with three LEDs, and the attached handlebar mount. The light is black with red accents and features the 'pwr' and 'knog' logos.
Característiques del producte
- Disseny modular: Separates into a lighthead and a PWR Bank.
- Alt Brillantor: Outputs a maximum of 1100 lumens.
- Funcionalitat del banc d'energia: Charge external devices like phones, GoPros, or cycle computers.
- Indicador de bateria: Four built-in LED lights indicate battery charge level.
- Modes personalitzables: Program light modes using Modemaker software.
- Versatilitat de muntatge: Can be mounted above or below handlebars, or on a helmet.
- Elliptical Beam: Provides broad and bright road coverage.
Configuració
Càrrega del dispositiu
- Locate the micro USB charging port on the PWR Trail.
- Connect the included micro USB cable to the light and to a suitable USB power source.
- The battery indicator lights will illuminate to show charging progress. A full charge takes approximately 3.5 hours.
Muntatge de la Llum
The PWR Trail comes with a side mount and shim, compatible with handlebars from 22.2mm to 38.1mm diameter.
- Choose your desired mounting position: on top or below handlebars, or directly under a Garmin device.
- Securely attach the side mount to your handlebar using the appropriate shim for a snug fit.
- Slide the PWR Trail light onto the mount until it clicks securely into place. Ensure it is firmly seated to prevent accidental detachment during use.
Instruccions de funcionament
Turning On/Off and Mode Selection
The PWR Trail uses a simple twist-head operation:
- Per encendre la llum on, twist the lighthead clockwise.
- To cycle through the 6 pre-programmed light modes, continue twisting the lighthead clockwise.
- Per encendre la llum apagat, twist the lighthead counter-clockwise until it clicks off.
Comprovació del nivell de la bateria
To activate the battery indicator, gently tap the bottom of the light. Four built-in LED lights will illuminate:
- 4 llums: Totalment carregat
- 2 llums: Mig carregat
- And so on, indicating remaining charge.
Ús com a Power Bank
- Press the red button located on the side of the light to release the lighthead from the PWR Bank.
- Connect your device (phone, GoPro, etc.) to the USB output port on the PWR Bank using an appropriate charging cable.
- The PWR Bank will begin charging your device. For example, 1 hour of riding at 1000 lumens can provide approximately 75% charge to an iPhone.
Customizing Light Modes (Modemaker)
The PWR Trail's light modes can be customized using Knog's Modemaker software. Visit the official KNOG website for more information and to download the software. This allows you to control brightness, adjust runtimes, and add new light modes to suit your specific needs.
Manteniment
- Neteja: Netegeu la llum amb un anunciamp drap després de l'ús. Eviteu productes de neteja o dissolvents abrasius.
- Emmagatzematge: Store the light in a cool, dry place when not in use. For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- juntes tòriques: The light uses O-rings to maintain its water resistance. Periodically inspect these for wear and tear. If the light becomes difficult to separate for charging, the O-rings may be very tight; apply gentle, firm pressure to separate the components.
- Port de càrrega: Keep the micro USB charging port free from dirt and moisture.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | La bateria està esgotada. | Charge the light fully (approx. 3.5 hours). |
| La llum parpelleja o s'atenua inesperadament. | Bateria baixa o connexió fluixa. | Check battery level and recharge if necessary. Ensure lighthead is securely attached to the PWR Bank. |
| Light falls off handlebar. | Mount not securely fastened or incorrect shim used. | Ensure the mount is tightly secured to the handlebar and the correct shim is used for a snug fit. Verify the light is clicked into place on the mount. |
| Cannot separate lighthead from PWR Bank. | Tight O-rings for water resistance. | Press the red release button firmly and apply steady, firm pulling pressure to separate the components. It may require some force due to the waterproof seal. |
| External device not charging from PWR Bank. | PWR Bank battery depleted or incorrect cable. | Ensure the PWR Bank is charged. Try a different USB cable for your device. |
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | PWR Trail |
| Número de model | N1012307 2/24 |
| Brillantor | 1100 lúmens (màx.) |
| Capacitat de la bateria | 5000 mAh |
| Temps de càrrega | 3.5 hores |
| Run Time (Eco Flash) | Fins a 300 hores |
| Nombre de configuracions | 6 pre-programmed modes (customizable) |
| Tipus de muntatge | Handlebar Mount (22.2-38.1mm diameter) |
| Pes de l'article | 230 grams |
| Classificació de protecció internacional | IP67 |
| Color | Negre |
Garantia i Suport
The KNOG PWR Trail 1100L comes with a Garantia del fabricant de 2 anys.
For warranty claims, technical support, or further assistance, please visit the official KNOG weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Official KNOG Weblloc: www.knog.com
