GOOLOO GP80 800A Peak SuperSafe Car Jump Starter User Manual

1. Introducció

Thank you for choosing the GOOLOO GP80 800A Peak SuperSafe Car Jump Starter. This portable and powerful device is designed to jump start 12V vehicles with up to 4.5L gas engines, and can also serve as a portable power bank for charging various electronic devices. Please read this manual carefully before use to ensure safe and optimal performance.

Image: The GOOLOO GP80 jump starter connected to a car battery, demonstrating its primary function.

2. Informació important de seguretat

Always observe the following safety precautions when using the GOOLOO GP80 jump starter:

• No ho facis immerse the unit in water or expose it to rain.
• No ho facis operate the unit if it has been severely damaged or dropped.
• No ho facis disassemble the unit. Only qualified service personnel should repair this device.
• No ho facis use the jump starter to charge non-rechargeable batteries.
• Assegureu-vos una ventilació adequada durant l'ús.
• Mantenir fora de l'abast dels nens.
• Wear eye protection when working near batteries.
• Connecteu el clamps correctly: Red to Positive (+) i Black to Negative (-). Reverse polarity can cause damage.
• Traieu l'arrencador de bateria de la bateria del vehicle en un termini de 30 segons després que el vehicle s'engegi.

3. Contingut del paquet

Please check the package contents upon opening. If anything is missing or damaged, contact GOOLOO customer support.

• Arrancador de salt GOOLOO GP80
• Smart Jumper Clamps
• Cable de càrrega USB-C
• Manual d'usuari
• Caixa d'emmagatzematge (pot variar segons el paquet)

Image: The GOOLOO GP80 jump starter unit shown with its smart jumper clamps.

4. Característiques i components del producte

Familiarize yourself with the different parts of your GP80 jump starter:

• Botó d'encesa: Turns the unit on/off and activates the flashlight.
• Indicador de nivell de bateria: LED lights showing the remaining battery capacity.
• USB Output Port (Quick Charge): Per carregar telèfons intel·ligents, tauletes i altres dispositius alimentats per USB.
• Port d'entrada/sortida USB-C: For charging the jump starter itself or charging other devices.
• 12V Jump Start Port: Connects to the smart jumper clamps.
• Llanterna LED: Provides illumination, with multiple modes (steady, strobe, SOS).

5. Charging the GP80 Jump Starter

Before first use, fully charge the GP80. It is recommended to recharge the unit every 3 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C Input/Output port on the GP80.
2. Connecteu l'altre extrem del cable USB-C a un adaptador de paret USB (no inclòs) o a un port USB amb alimentació.
3. The battery level indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.

A full charge typically takes 3-4 hours depending on the power source.

6. Instruccions de funcionament

6.1. Arrencada d'un vehicle amb ajuda d'un cable

Ensure the GP80 is at least 50% charged before attempting to jump start a vehicle.

1. Connect the Smart Jumper Clamps: Inseriu el connector blau del connector de pont intel·ligentamps into the 12V Jump Start Port on the GP80. Ensure it is fully inserted.
2. Connectar a la bateria del cotxe:
   • Connecteu el VERMELL (+) clamp al terminal positiu de la bateria del cotxe.
   • Connecteu el NEGRE (-) clamp to the negative terminal of the car battery or a solid metal part of the car chassis (unpainted metal).

   L'intel·ligent clamps have indicator lights and an audible alarm for safety. Refer to the clamp's manual for specific error codes.
3. Arrancar el vehicle: Un cop el clamps are correctly connected and the smart clamp indicator light is solid green, start your vehicle's engine.
4. Eliminar Clamps: As soon as the vehicle starts, remove the smart jumper clamps from the car battery first, then disconnect the blue plug from the GP80.

Important: Do not crank the engine for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive jump starts.

6.2. Charging Mobile Devices

The GP80 can also function as a portable power bank.

1. Connect your device's USB charging cable to either the USB Output Port (Quick Charge) or the USB-C Input/Output Port on the GP80.
2. Connecteu l’altre extrem del cable al dispositiu mòbil.
3. The GP80 will automatically begin charging your device.

6.3. Ús de la llanterna LED

The built-in LED flashlight has multiple modes for convenience.

• Press and hold the Power Button for 3 seconds to turn on the flashlight (steady mode).
• Press the Power Button once to switch to Strobe mode.
• Press the Power Button again to switch to SOS mode.
• Press the Power Button once more to turn off the flashlight.

7. Manteniment

Proper maintenance ensures the longevity of your GP80 jump starter.

• Emmagatzematge: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The ideal storage temperature is between -20°C to 60°C (-4°F to 140°F).
• Recàrrega: Recharge the unit at least once every three months to prevent deep discharge and prolong battery life.
• Neteja: Feu servir un drap suau i sec per netejar la unitat. No utilitzeu productes químics agressius ni materials abrasius.
• Cura de la bateria: Avoid fully discharging the battery frequently. Charge it when the battery indicator shows 2-3 bars.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

GOOLOO products come with a standard warranty. For detailed warranty information, product registration, or technical support, please visit the official GOOLOO website or contact their customer service team. Keep your purchase receipt as proof of purchase.

GOOLOO Official Weblloc: www.gooloo.com

Correu electrònic d'atenció al client: support@gooloo.com