Manual d'instruccions del subwoofer amplificat Monoprice SW-10 (model 141497)

1. Introducció

The Monoprice SW-10 10-inch 150 Watt Powered Subwoofer is designed to deliver deeper bass and more dramatic impact to any music or home theater system. Featuring a front-firing 10-inch woofer, a powerful 150-watt RMS amplifier (300-watt peak), and a down-firing port, this compact subwoofer enhances your audio experience with fuller, cleaner bass in any room.

Figura 1.1: Davant view of the Monoprice SW-10 Powered Subwoofer with the grille removed, showcasing the 10-inch woofer.

2. Característiques clau

• Controlador de 10 polzades: Heavy-duty, long-throw, front-firing driver engineered for impactful deep bass, capable of pressurizing larger spaces for a full audio experience.
• Potent Ampmés viu: 150 Watts of Class D power (300 Watt peak) for robust performance.
• Controls integrals: Easy-access rear panel controls for volume, low-pass filter, phase adjustment (0°/180°), and power mode (On/Auto Standby).
• Connectivitat flexible: RCA inputs for dedicated subwoofer or preamp outputs, and speaker level inputs for amplifiers lacking dedicated subwoofer outputs.
• Resposta de freqüència àmplia: Delivers bass frequencies from 40 Hz to 150 Hz.
• Ported Design: Enhances bass output and efficiency.

Figura 2.1: Davant view of the Monoprice SW-10 Powered Subwoofer with the protective grille attached.

3. Contingut del paquet

Please ensure all items are present upon unpacking:

• Monoprice SW-10 Powered Subwoofer
• Cable d'alimentació
• Manual d'usuari (aquest document)

4. Configuració

4.1. Col·locació

Optimal placement of your subwoofer can significantly impact sound quality. Consider the following:

• Col·locació de la cantonada: Placing the subwoofer in a corner can maximize its output and enhance bass impact.
• Near Main Speakers: For seamless blending with your main speakers, place the subwoofer in the front of the room, ideally between or near your main left and right speakers.
• Eviteu les obstruccions: Ensure the down-firing port is not obstructed to allow proper air movement.

Figura 4.1: Subwoofer dimensions (16.0 inches / 40 cm wide) for placement consideration.

4.2. Connexions

The Monoprice SW-10 offers multiple connection options:

• RCA (Line In / Sub In): Connect an RCA cable from your receiver's dedicated subwoofer output (LFE or Sub Out) to the LFE IN (unfiltered) input on the subwoofer. If your receiver has stereo preamp outputs, connect them to the LINE IN (filtered) L and R inputs.
• Nivell de parlants: Si el teu amplifier lacks dedicated subwoofer or preamp outputs, connect your amplifier's speaker outputs to the SPEAKER LEVEL inputs on the subwoofer using speaker wire. Then, connect the subwoofer's speaker level outputs to your main speakers.

Figura 4.2: Detallada view of the rear control panel of the Monoprice SW-10 Powered Subwoofer, showing input/output connections and adjustment knobs.

4.3. Connexió d'alimentació

Connect the included power cord to the AC power inlet on the rear panel of the subwoofer, then plug the other end into a standard AC wall outlet.

5. Funcionament del subwoofer

The rear panel features several controls to fine-tune your subwoofer's performance:

• Nivell de volum: Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase until the bass blends seamlessly with your main speakers.
• Filtre de pas baix: This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
• Phase Control (0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass.
• Power Mode (On/Auto):
  • A: El subwoofer roman encès contínuament.
  • Automàtic: The subwoofer will automatically turn on when an audio signal is detected and enter standby mode after a period of inactivity.

6. Manteniment

To ensure the longevity and optimal performance of your subwoofer:

• Neteja: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners or solvents.
• Col·locació: Keep the subwoofer away from direct sunlight, heat sources, and excessive moisture.
• Ventilació: Ensure adequate airflow around the rear panel to prevent overheating.

7. Solució De Problemes

If you encounter issues with your subwoofer, refer to the following common solutions:

• Sense energia:
  • Check if the power cord is securely connected to both the subwoofer and the wall outlet.
  • Verifiqueu que la presa de corrent funciona connectant-hi un altre dispositiu.
  • Ensure the Power Mode switch is set to "On" or "Auto".
• Sense so:
  • Confirm that the audio cables (RCA or speaker wire) are correctly connected between the subwoofer and your receiver/ampmés viu.
  • Increase the Volume Level on the subwoofer.
  • Check your receiver/amplifier settings to ensure the subwoofer output is enabled and the volume is not muted.
• So distorsionat:
  • Reduce the Volume Level on the subwoofer and/or your receiver/ampmés viu.
  • Adjust the Low-Pass Filter to ensure it's not set too high, causing overlap with your main speakers.
  • Experiment with the Phase Control (0°/180°) for better integration.

8. Producte acabatview Vídeo

Mira aquest producte oficialview video from Monoprice for a visual guide to the SW-10 Powered Subwoofer.

9. Especificacions

10. Garantia i assistència

The Monoprice SW-10 Powered Subwoofer comes with a Limited Warranty. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official Monoprice weblloc.

For technical support, troubleshooting assistance, or service inquiries, please contact Monoprice Customer Support through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.