Manual d'usuari del carregador de balanceig compacte de CA ToolkitRC M4AC 30W 2.5A

1. Introducció

Thank you for choosing the ToolkitRC M4AC 30W 2.5A Compact AC Balance Charger. This manual provides essential information for the safe and efficient operation of your charger. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The M4AC is a compact and powerful balance charger designed for lithium batteries, featuring an intuitive IPS display and precise balancing capabilities.

2. Informació de seguretat

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the charger or batteries.

• Feu servir sempre el carregador en una zona ben ventilada, allunyada de materials inflamables.
• Do not expose the charger to moisture, rain, or extreme temperatures.
• Ensure the correct battery type and cell count are selected before charging. Incorrect settings can lead to battery damage or fire.
• No deixeu mai el carregador sense vigilància mentre està en funcionament.
• Mantenir fora de l'abast dels nens. L'edat recomanada per a l'ús és de 14 anys o més.
• Do not attempt to disassemble or modify the charger. This will void the warranty and may cause malfunction.
• Desconnecteu el carregador de la font d'alimentació quan no l'utilitzeu.

3. Producte acabatview

The ToolkitRC M4AC charger is designed for ease of use with a clear display and essential ports.

Figura 3.1: Davant view of the M4AC charger. The screen shows charging status, including voltage, current, and battery capacity. Below the screen is a button labeled 'TYPE / CURR' for navigation and selection.

Figura 3.2: Output side of the M4AC charger. This view highlights the yellow XT60 output connector on the right and the multi-pin balance port on the left, labeled for 2-4S batteries.

Figura 3.3: posterior view of the M4AC charger. This shows the standard two-prong AC power input port, where the power cable connects to supply electricity to the charger.

3.1. Components

• Pantalla IPS: High-resolution screen for displaying charging parameters.
• TYPE / CURR Button: Used for navigating menus and adjusting current settings.
• XT60 Output Port: Main power output connector for charging batteries.
• Balance Port (2-4S): For connecting battery balance leads to ensure even cell voltage durant la càrrega.
• Port d'entrada de CA: For connecting the charger to a standard AC power outlet.

4. Configuració

Follow these steps to set up your ToolkitRC M4AC charger for the first time.

1. Desembaleu el carregador: Carefully remove the charger and any included accessories from its packaging.
2. Connectar l'alimentació: Plug the AC power cable into the AC input port on the rear of the charger (Figure 3.3). Then, plug the other end of the power cable into a suitable AC power outlet (100-240V AC). The charger display should illuminate.
3. Pantalla inicial: The display will show the main interface, ready for battery connection.

5. Instruccions de funcionament

This section details how to charge and balance your lithium batteries using the M4AC charger.

5.1. Connecting a Battery

1. Identifica el tipus de bateria: Ensure your battery is a lithium type (LiPo, LiFe, LiHV) and within the 2-4S cell count range supported by the charger.
2. Connect Balance Lead: First, connect the battery's balance lead to the charger's balance port (Figure 3.2). Ensure the connector is inserted correctly, aligning the pins.
3. Connect Main Power Lead: Next, connect the battery's main power lead (XT60 connector) to the charger's XT60 output port (Figure 3.2).
4. Detecció automàtica: The charger will automatically detect the battery's cell count and type. The display will show the detected voltage and cell count.

5.2. Ajust del corrent de càrrega

1. Once the battery is connected and detected, the screen will show the default charging current.
2. Press the 'TYPE / CURR' button to cycle through available charging current options. Select a current appropriate for your battery's capacity (typically 1C, e.g., for a 2200mAh battery, charge at 2.2A).
3. Press and hold the 'TYPE / CURR' button to confirm the selection and start charging.

5.3. Monitoring Charging Progress

During charging, the IPS display provides real-time information:

• Vol totaltage: El vol globaltage de la bateria.
• Cell voltages: Cèl·lula individual voltages for balancing.
• Corrent de càrrega: The current being delivered to the battery.
• Capacity Charged: The amount of mAh (milliampere-hours) delivered to the battery.
• Percentatge de càrregatage: An estimated percentage of charge completion.

5.4. Completing the Charge

The charger will automatically stop charging when the battery reaches its full voltage. An audible alert may sound, and the display will indicate 'Charge Complete'.

1. Once charging is complete, first disconnect the main power lead (XT60) from the charger.
2. Then, disconnect the balance lead from the charger.
3. Remove the charged battery.

6. Manteniment

Proper maintenance ensures the longevity and reliable operation of your charger.

• Neteja: Use a soft, dry cloth to clean the charger's exterior. Do not use solvents or abrasive cleaners.
• Emmagatzematge: Guardeu el carregador en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
• Inspecció: Periodically inspect the power cable and connectors for any signs of damage or wear. Do not use if damaged.

7. Solució De Problemes

If you encounter issues with your M4AC charger, refer to the following common problems and solutions.

8. Especificacions

Key technical specifications for the ToolkitRC M4AC charger.

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please contact ToolkitRC directly or refer to their official weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Fabricant: ToolkitRC

Weblloc: www.toolkitrc.com (Si us plau, verifiqueu l'oficial website for the most accurate support information.)