Introducció
Thank you for choosing the artika Lumo 8-inch LED Motion Sensor Closet Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Informació important de seguretat
- Always turn off the main power supply at the circuit breaker before installing or performing any maintenance on the fixture.
- Aquest producte està pensat només per a ús en interiors. No l'exposeu a l'aigua ni a la humitat.
- Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure, consult a qualified electrician.
- Do not attempt to modify the fixture. Any modifications may void the warranty and pose a safety risk.
- The integrated LED light source is not replaceable. Do not attempt to open the LED module.
- Mantenir els materials d'embalatge fora de l'abast dels nens.
Contingut del paquet
Verify that all components are present and undamaged before installation:
- 2 x artika Lumo 8-inch LED Motion Sensor Light Fixtures
- Mounting Hardware (screws, wire connectors)
- Manual d'instruccions
Especificacions tècniques
| Especificació | Valor |
|---|---|
| Marca | Artika |
| Número de model | CL-CO8-C |
| Dimensions (L x A x A) | 8.05 x 8.05 x 0.75 polzades |
| Pes de l'article | 1 lliures |
| Brillantor | 1200 lúmens |
| Temperatura de color | 4000 Kelvin (blanc fred) |
| Tipus de font de llum | LED integrat |
| Font d'alimentació | 120 Volts, Wired Electric |
| Wattage | 16 watts |
| Interval del sensor de moviment | Fins a 4 metres (12.2 peus) |
| Angle del sensor de moviment | 360 graus |
| Temps de detecció | 30 segons |
| Índex de reproducció del color (CRI) | 80 |
| Vida Mitjana | 25,000 hores |
| Ús interior/exterior | Interior |
| Característica especial | Motion Sensor, Day and Night Mode |
Guia d'instal·lació
This fixture is designed for flush mount installation. Ensure the power is off before proceeding.
Eines necessàries
- Tornavís (cap Phillips)
- Pelafils
- Drill (if mounting to drywall without existing junction box)
- Llapis
- Ulleres de seguretat
Instruccions de muntatge
- Apagueu l'alimentació: Localitzeu l'interruptor que controla la ubicació de la lluminària i canvieu-lo a la posició OFF. Verifiqueu que l'alimentació estigui apagada utilitzant un voltimetre.tage provador.
- Preparació de la superfície de muntatge: If replacing an existing fixture, remove it. Ensure the mounting surface is clean and flat.
- Connecteu el cablejat: Carefully connect the electrical wires from the ceiling or wall to the fixture's wires using the provided wire connectors. Typically, connect the black wire (live) to the black fixture wire, the white wire (neutral) to the white fixture wire, and the ground wire (bare copper or green) to the fixture's ground wire or grounding screw.
- Fixació segura: Align the fixture with the mounting holes or junction box. Use the provided screws to securely attach the light fixture to the ceiling or wall. Ensure it is flush and stable.
- Restaura l'alimentació: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.
Operating Your Lumo LED Light
The artika Lumo light features an integrated motion sensor and day/night mode for automated operation.
Funcionalitat del sensor de moviment
The light is equipped with a 360-degree motion detector that can sense movement up to 4 meters (12.2 feet) away. Once motion is detected, the light will illuminate for approximately 30 seconds. If motion continues, the light will remain on.
Mode dia i nit
The integrated day and night sensor ensures the light only activates with motion when the ambient light level is low. This conserves energy by preventing the light from turning on during daylight hours.
Canvia la configuració
A small toggle switch is located on the side of the fixture (refer to Figure 3). This switch allows you to select the operating mode:
- Mode AUTOMÀTIC: (Typically the default or middle position) The light will activate only when motion is detected AND the ambient light is low. This is the energy-saving motion sensor mode.
- Mode ON: (Typically one end position) The light will remain continuously on, overriding the motion sensor and day/night detection.
- Mode OFF: (Typically the other end position) The light will remain continuously off, regardless of motion or ambient light.
Adjust the switch to your desired operating mode after installation.
Cura i Manteniment
To ensure the longevity and optimal performance of your artika Lumo LED light, follow these simple maintenance guidelines:
- Neteja: Desconnecteu l'alimentació abans de netejar-la. Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp drap. No utilitzeu netejadors abrasius, dissolvents ni poliments, ja que poden danyar l'acabat o els components elèctrics.
- Inspecció: Periodically check for any loose connections or signs of damage. If any issues are found, turn off power and consult a qualified electrician.
- Vida útil LED: The integrated LED has an average life of 25,000 hours and does not require bulb replacement.
Resolució de problemes
If you encounter issues with your artika Lumo LED light, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. L'interruptor està en posició OFF. Connexió de cablejat defectuosa. | Comproveu l'interruptor. Ensure switch is in AUTO or ON position. Verify wiring connections are secure (power off first). |
| La llum es manté encesa contínuament. | Switch is in ON position. Constant motion detected. | Set switch to AUTO mode. Ensure no continuous motion is within sensor range. |
| La llum no detecta moviment. | Sensor obstruït. Motion outside detection range. L'interruptor està en posició OFF. | Elimineu qualsevol obstrucció del sensor. Ensure motion occurs within 4 meters (12.2 feet) of the sensor. Set switch to AUTO or ON position. |
| La llum s’encén durant la llum del dia. | Switch is in ON position. Ambient light sensor malfunction (rare). | Ensure switch is in AUTO mode. Si el problema persisteix, contacteu amb l'atenció al client. |
Informació de la garantia
artika products are manufactured to the highest quality standards and are warranted to be free from defects in materials and workmanship for a specified period from the date of purchase. Please refer to the warranty card included with your product or visit the official artika weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
Atenció al client
For technical assistance, missing parts, or any questions regarding your artika Lumo LED light, please contact artika customer support. Contact information can typically be found on the product packaging or the official artika weblloc.
