ZunDian 6-in-1 1800 Amp Jump Starter & Power Station

Introducció

The ZunDian 6-in-1 Power Station is a versatile and essential tool for automotive emergencies, outdoor activities, and general power needs. It integrates a powerful jump starter, a 260 PSI air compressor, a 400W AC power inverter, a 12V power station, a 15W USB-A port, and a 300-lumen LED flashlight into one compact unit. Designed for convenience and reliability, it ensures you are prepared for various situations.

Informació de seguretat

ADVERTÈNCIA: Llegiu totes les instruccions de seguretat abans d'utilitzar-lo.

• Utilitzeu sempre protecció ocular quan feu servir l'arrencada.
• Ensure proper polarity connections (positive to positive, negative to negative) to avoid damage or injury. The unit features 10 intelligent protection systems for safety.
• No exposeu la unitat a la pluja o a condicions humides.
• Mantenir fora de l'abast dels nens.
• Operar en una zona ben ventilada.
• No desmunteu la unitat. Per a les reparacions, consulteu personal de servei qualificat.

Producte acabatview

The ZunDian 6-in-1 Power Station is designed for ease of use with clearly labeled controls and integrated components.

Figura 1: Frontal view of the ZunDian 6-in-1 Power Station.

Controls del panell frontal

• Manòmetre: Displays air pressure for the compressor.
• Compressor Switch: Activates the air compressor.
• Reverse Polarity Indicator: Illuminates if jumper cables are connected incorrectly.
• Interruptor de llum: Turns the LED worklight on/off.
• DC Volts Meter: Shows the unit's battery voltage.
• Jack de càrrega: Input for recharging the power station.
• Botó d'estat de la bateria: Press to check the remaining battery charge.
• DC 12V Sockets: Two 12V outlets for powering DC devices.
• Llum de treball LED: Provides illumination for dark environments.

Figura 2: Detallada view of the front panel controls.

Característiques del panell posterior

• Port USB-A: 15W output for charging mobile devices.
• Preses de CA: Two 110V/120V outlets (400W total) for AC devices.
• Inverter Switch: Activates the AC power inverter.
• Jumper Safety Switch: Must be turned ON for jump-starting functionality.
• Air Compressor Hose Storage: Compartment for the integrated air compressor hose.

Figura 3: posterior view of the power station showing outlets and switches.

Accessoris inclosos

• Integrated heavy-duty battery booster jumper clamps.
• Integrated inflatable hose.
• 1x AC Power Adapter.
• 1x adaptador de corrent continu.
• 1 x manual d'usuari.
• 1x Car accessories (likely various nozzles for inflation).
• 1x Car Repair Tools (e.g., safety hammer).

Configuració

Càrrega inicial

Before first use, fully charge the ZunDian Power Station. It comes with a 22Ah sealed lead-acid rechargeable battery.

1. Connect the AC Power Adapter to the Charging Jack on the front panel.
2. Plug the AC Power Adapter into a standard wall outlet.
3. Allow the unit to charge until the battery indicator shows full charge.
4. Alternatively, use the DC Power Adapter to charge the unit from a 12V car outlet.

Figure 4: Charging the power station.

Instruccions de funcionament

Arrancar un vehicle

El Pic 1800 Amp Jump Starter can start 8.5L Gasoline Engines and 6.0L Diesel Engines for various 12V vehicles.

1. Assegureu-vos que el contacte del vehicle estigui apagat.
2. Connect the red (positive) jumper clamp al terminal positiu (+) de la bateria del vehicle.
3. Connect the black (negative) jumper clamp a una peça metàl·lica neta i sense pintar del bloc del motor o del xassís del vehicle, lluny de la bateria.
4. Turn the Jumper Safety Switch on the rear panel to the 'ON' position.
5. Attempt to start the vehicle. If it doesn't start immediately, wait a few minutes and try again.
6. Once the vehicle starts, immediately turn the Jumper Safety Switch to 'OFF'.
7. Desconnecteu el cl negre (negatiu)amp primer, després el cl vermell (positiu)amp.

Figure 5: Jump starting a vehicle.

Ús del compressor d'aire

The 260 PSI air compressor can inflate tires (195/65/R15 automotive tires from 0 psi to 35 psi in 3 minutes) and other inflatables.

1. Retrieve the inflatable hose from its storage compartment on the rear panel.
2. Attach the hose securely to the tire valve stem or appropriate inflatable adapter.
3. Turn the Compressor Switch on the front panel to 'ON'.
4. Monitor the pressure gauge until the desired pressure is reached. The sensor automatically stops when proper pressure is reached.
5. Turn the Compressor Switch to 'OFF' and disconnect the hose.

Figure 6: Inflating a car tire with the air compressor.

Figure 7: Multi-purpose air compressor for vehicles, bicycles, balls, and inflatables.

Portable Power Station Functionality

The unit can power up to 6 devices simultaneously with its 400W AC inverter, USB-A port, and 12V DC sockets.

1. For AC devices, turn the Inverter Switch on the rear panel to 'ON'. Plug your 110V/120V devices into the AC outlets.
2. For USB devices, plug your USB cable into the USB-A Port on the rear panel.
3. For 12V DC devices, plug them into the DC 12V Sockets on the front panel.

Figure 8: Powering various devices with the ZunDian Power Station.

Manteniment

Cura i emmagatzematge

• If not used for a long time, charge the battery jumper within three months to maintain battery health.
• Guardeu la unitat en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Mantingueu la unitat neta i lliure de pols i residus.

Resolució de problemes

Especificacions

Garantia i Suport

The ZunDian 6-in-1 Power Station comes with a 1-year warranty and friendly customer service. For any questions, issues, or to request replacement parts (e.g., lost charger or nozzle), please contact ZunDian customer support.

Informació de contacte:

• Refer to your user manual for specific contact details or visit the official ZunDian weblloc.