Orbit Manual Valve Converter to Automatic Sprinkler System - 1 Inch

Producte acabatview

The Orbit Manual Valve Converter is designed to transform existing 3/4-inch and 1-inch manual sprinkler valves into an automatic system. Constructed from durable, non-corrosive plastic, this converter ensures long-lasting performance in various irrigation setups. It features a low voltage solenoid for reliable electronic control and a bleed screw for convenient manual operation when needed. A ring adapter is included to facilitate conversion across a wide range of manual valve brands.

Figure 1: Orbit Manual Valve Converter. This image displays the main components including the green plastic valve body, the black solenoid, and the brass threaded connection for installation.

Configuració i instal·lació

Before beginning installation, ensure the main water supply to your sprinkler system is turned off. This prevents water flow and potential damage during the conversion process.

1. Identificar el tipus de vàlvula: Confirm your existing manual valve is either a 3/4-inch plastic, 1-inch plastic, or 1-inch brass valve. The Orbit converter is compatible with these types.
2. Remove Manual Components: Carefully remove the existing manual control components from your valve. This typically involves unscrewing the manual handle or lever and any associated internal parts. Refer to your original valve's manual if unsure.
3. Install Ring Adapter (if needed): If your valve requires it, place the included ring adapter onto the valve body. This adapter ensures a secure fit for the new converter.
4. Attach Converter: Screw the Orbit Manual Valve Converter onto the valve body. Ensure it is hand-tightened securely to prevent leaks. Do not overtighten.
5. Connecteu el cablejat: Connecteu el baix voltage wires from your sprinkler controller to the solenoid wires on the converter. Typically, one wire connects to the common terminal and the other to the zone terminal on your controller. Consult your sprinkler controller's manual for specific wiring instructions.
6. Sistema de prova: Once installed and wired, slowly turn the main water supply back on. Test the valve by activating the corresponding zone from your sprinkler controller. Check for any leaks around the connections.

Note: For optimal performance and to prevent damage, ensure all electrical connections are secure and protected from moisture.

Instruccions de funcionament

The Orbit Manual Valve Converter allows for both automatic and manual operation of your sprinkler zone.

Funcionament automàtic

Once properly wired to a sprinkler controller, the valve will open and close automatically based on the programming set on your controller. Refer to your sprinkler controller's user manual for instructions on setting watering schedules and zone durations.

Manual Operation (Bleed Screw)

To manually open the valve and allow water flow, locate the bleed screw on the converter's solenoid. Slowly turn the bleed screw counter-clockwise until water begins to flow. To close the valve manually, turn the bleed screw clockwise until it is fully tightened. Do not overtighten the bleed screw.

Caution: Always ensure the bleed screw is fully tightened for automatic operation to function correctly and to prevent continuous water flow.

Manteniment

Regular maintenance helps ensure the longevity and proper functioning of your Orbit Manual Valve Converter.

• Inspecció estacional: Before the start of each irrigation season, inspect the converter for any visible signs of wear, cracks, or damage.
• Comprovació de fuites: Periodically check for leaks around the valve body and connections. Address any leaks promptly to conserve water and prevent system damage.
• Hivernització: In regions subject to freezing temperatures, it is crucial to properly winterize your sprinkler system, including the valve converter. This typically involves shutting off the main water supply, draining the system, and using an air compressor to blow out any remaining water. Consult local guidelines for proper winterization procedures.
• Neteja: If debris or sediment affects valve operation, the internal components may need cleaning. Turn off the water supply, carefully disassemble the converter, clean parts with clear water, and reassemble.

Resolució de problemes

Especificacions

• Model: B08SQR4128
• Compatibilitat: 3/4-inch plastic, 1-inch plastic, and 1-inch brass manual valves
• Material: Durable, non-corrosive plastic
• Solenoid Type: Vol baixtage
• Funcionament manual: Cargol de purga
• Inclòs: Ring adapter for conversion
• Pes de l'article: 8 unces
• UPC: 840041540970

Garantia i Suport

For warranty information and technical support, please contact Orbit customer service. Keep your purchase receipt as proof of purchase.

Orbit Customer Service:

• Visit the official Orbit website for contact details and support resources: www.orbitanline.com
• Refer to the product packaging for specific warranty terms and conditions.