Introducció
Welcome to the user manual for your Midea MWD2N1SS Bottom Load Water Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before use and keep it for future reference.
Producte acabatview
The Midea MWD2N1SS is a sleek, silver-colored bottom-load water dispenser designed for convenience and efficiency. It provides both hot and cold water on demand, featuring a powerful cooling compressor and a durable stainless steel tank.
Imatge: Frontal view of the Midea MWD2N1SS Bottom Load Water Dispenser, showcasing its silver finish and dual spouts.
Instruccions importants de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions.
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- No feu servir cap aparell amb un cable o un endoll danyats.
- Mantingueu el cable d'alimentació lluny de superfícies escalfades.
- Assegureu-vos que l'aparell estigui ben connectat a terra.
- Unplug the dispenser before cleaning or servicing.
- Aquest aparell només és per a ús interior.
- Double safety features prevent overheating by stopping heating if the tank is empty.
Configuració i instal·lació
Desembalatge
Carefully remove the dispenser from its packaging. Inspect for any shipping damage. Keep packaging materials for future transport if needed.
Col·locació
Place the dispenser on a flat, stable surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit (at least 10 cm clearance from walls).
Image: Dimensional diagram of the Midea MWD2N1SS water dispenser, indicating its height of 104 cm, depth of 31 cm, and width of 36 cm.
Instal·lació d'ampolles d'aigua
This is a bottom-load dispenser.
- Obriu la porta de l'armari inferior.
- Place a standard 20-liter (5-gallon) water bottle into the cabinet.
- Insert the water probe into the bottle opening. Ensure it is securely seated.
- Tanqueu la porta de l'armari.
Inici inicial
Before plugging in, ensure the water bottle is installed and water has filled the internal tanks. This prevents dry heating.
- Connecteu el cable d'alimentació a una presa de corrent amb connexió a terra (115 volts).
- Allow the unit to sit for at least 30 minutes before turning on heating or cooling functions to allow refrigerants to settle.
- Turn on the cooling switch (usually located at the back or on the control panel). The cooling compressor will begin to operate. Expect refreshing cold water in 25-30 minutes.
- Turn on the heating switch (usually located at the back or on the control panel). The heating element will begin to operate. Hot water will be ready when the indicator light turns off.
Instruccions de funcionament
Tauler de control
The dispenser features a digital control panel and a night LED light for ease of use in low light conditions.
Image: The Midea water dispenser highlighting its ability to provide both cold and hot water.
Distribució d'aigua
To dispense water, place a cup under the desired spout and press the corresponding lever or button.
- Aigua freda: Press the cold water lever. The high-power cooling compressor ensures a refreshing temperature quickly.
- Aigua calenta: For safety, the hot water dispenser may require a safety lock or a specific button press sequence. Refer to the specific controls on your unit. The stainless steel tank shortens heating time.
Consells d'estalvi d'energia
- Turn off the hot water switch if hot water is not needed for extended periods.
- Mantingueu el dispensador allunyat de la llum solar directa i de fonts de calor.
- Assegureu-vos una ventilació adequada al voltant de la unitat.
Manteniment i cura
Neteja de l'exterior
Netegeu les superfícies exteriors amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
Safata de goteig
The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. Remove the tray, empty it, wash with mild soap and water, rinse, and dry thoroughly before replacing.
Descaling (for Hot Water Tank)
Over time, mineral deposits may accumulate in the hot water tank. Descaling is recommended every 3-6 months depending on water hardness.
- Desendolla el dispensador i deixa que es refredi completament.
- Drain all water from both hot and cold tanks.
- Prepare a descaling solution (e.g., a mixture of white vinegar and water).
- Pour the solution into the hot water tank (usually through the hot water faucet or a dedicated opening).
- Let it sit for 30 minutes to an hour.
- Escorreu completament la solució.
- Rinse the tank thoroughly with clean water several times to remove any residue.
- Refill with fresh water before resuming operation.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense aigua freda | Cooling switch off; not enough time to cool; compressor issue. | Ensure cooling switch is on. Allow 25-30 minutes for cooling. Check power supply. |
| Sense aigua calenta | Heating switch off; hot water tank empty; safety thermostat tripped. | Ensure heating switch is on. Check water bottle level. Reset safety thermostat if applicable (refer to specific model instructions). |
| Fuites d'aigua | Water bottle cracked or improperly seated; drain plug loose. | Replace water bottle. Ensure bottle is correctly installed. Tighten drain plug. |
| Soroll inusual | Compressor cycling normally; unit not level; loose parts. | Normal operation includes compressor noise. Ensure unit is on a level surface. Contact service if noise is excessive. |
| L'aigua té un gust estrany | New unit (plastic taste); dirty tanks; old water. | Dispense and discard several liters of water for new units. Clean tanks thoroughly. Use fresh water. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client de Midea.
Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | Midea |
| Número de model | MWD2N1SS |
| Color | Plata |
| Dimensions (A x A x P) | 104 cm x 36 cm x 31 cm (aprox. 40.9 polzades x 14.2 polzades x 12.2 polzades) |
| Pes | 16.9 kg (aprox. 37.3 lliures) |
| Voltage | 115 Volts |
| Material | Stainless Steel (tank) |
| Temperatures de l'aigua | Calent i Fred |
| Temps de refredament | 25-30 minutes for refreshing temperature |
| Característiques de seguretat | Double safety to prevent overheating (thermostat) |
| Característiques addicionals | Night LED light, Digital control panel |
Garantia i Suport
Midea offers a comprehensive warranty for your water dispenser.
Image: Midea's quality guarantee, indicating a 2-year total warranty and a 10-year compressor warranty.
- Total Warranty: 2 Anys
- Garantia del compressor: 10 Anys
If you are not satisfied with the performance of your Midea product, registered in time according to the program, you may call the contact center within a maximum period of 60 days after the product is delivered to your home, to request an exchange.
For customer support, warranty claims, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Midea weblloc.
