Yaheetech Adjustable PU Leather Swivel Bar Stools (Set of 2) Instruction Manual

Introducció

Thank you for choosing Yaheetech Adjustable PU Leather Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

Informació important de seguretat

ADVERTIMENT: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov/furniture.

Assegureu-vos que totes les peces estiguin presents i sense danys abans del muntatge.
Do not use the product if any part is missing, damaged, or worn.
Do not stand on the bar stool.
No supereu la capacitat màxima de pes de 330 lliures (150 kg).
Mantingueu els nens allunyats del producte durant el muntatge.
Feu servir sempre sobre una superfície plana i estable.

Contingut del paquet

Your Yaheetech Bar Stools package should contain the following components for a set of 2 stools:

2 x Seat Cushions with Backrest (PU Leather)
2 x Gas Lift Cylinders (SGS-certified)
2 x Footrests (Chrome-plated metal)
2 x Base Plates (Electroplated metal with anti-slip rubber ring)
Maquinari de muntatge (cargols, clau Allen)
Manual d'instruccions

Setup (Assembly Instructions)

Assembly is quick and easy, typically taking less than 10 minutes per chair. Follow these steps:

Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i suau per evitar ratllades.
Attach Footrest to Gas Lift: Slide the footrest ring onto the gas lift cylinder. Ensure it is securely positioned.
Inseriu l'elevador de gas a la base: Place the wider end of the gas lift cylinder into the center hole of the base plate. The anti-slip rubber ring on the base should be facing down.
Attach Seat to Gas Lift: Align the mounting plate on the underside of the seat cushion with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen wrench. Ensure all screws are tightened firmly.
Repetiu per al segon tamboret: Follow steps 1-4 to assemble the second bar stool.

Two assembled red Yaheetech bar stools next to a small round table. — Image: Two fully assembled Yaheetech bar stools in red, showcasing their modern design and chrome bases.

Two red Yaheetech bar stools positioned at a kitchen counter. — Image: Yaheetech bar stools in a kitchen setting, demonstrating their suitability for counter height use.

Instruccions de funcionament

Ajust d'alçada: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. The gas lift system allows for smooth height adjustments.
Funció giratòria: The bar stools feature a 360-degree swivel function, allowing for easy rotation without moving the base.
Reposall: Utilize the built-in footrest for added comfort and support while seated.

Close-up of the Yaheetech bar stool's gas lift, wide metal base with rubber ring, and built-in footrest. — Imatge: Detallada view of the secure gas lift mechanism, the wide 16-inch diameter metal base with its anti-slip rubber ring, and the integrated footrest, highlighting key functional components.

Manteniment

Neteja: Wipe the PU leather and metal surfaces with a damp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, que poden danyar l'acabat.
Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
Protecció del sòl: The base includes an anti-slip rubber ring to protect your floors. Ensure this ring is clean and intact.

Three images showing the high-density foam seat, water-resistant surface, and chic biscuit tufting of the Yaheetech bar stool. — Imatge: Primer pla views illustrating the high-density foam seat for comfort, the water-resistant PU leather surface, and the stylish biscuit tufting design.

Resolució de problemes

Les femtes són inestables: Check that all assembly screws are securely tightened. Ensure the base is on a flat, even surface.
L'ajust d'alçada no funciona: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is properly seated in both the base and the seat mechanism.
Soroll de grinyol: Apply a small amount of silicone lubricant to moving parts, such as the swivel mechanism or gas lift, if squeaking occurs.

Especificacions

Dimensions del producte	19.5 "P x 17" W x 36.5" H
Color	Vermell
Marca	Yaheetech
Mida	Set de 2
Estil	Modern
Alçada del seient	Adjustable from 21.7 Inches
Amplada del seient	17 polzades
Recomanació de pes màxim	330 lliures (150 kg)
Material del marc	Metall
Tipus de material del seient	Faux Leather (PU Leather)
Muntatge obligatori	Sí
Pes de l'article (per tamboret)	Approximately 15.75 pounds (31.5 pounds for set of 2)

Diagram showing detailed dimensions of the Yaheetech bar stool, including height, width, and depth. — Image: Technical drawing with key dimensions of the bar stool, including seat height range (25-33.3 inches), seat width (17 inches), and overall height (36.5-44.5 inches).

Informació de la garantia

Yaheetech products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included in your package or contact Yaheetech customer support.

Atenció al client

If you have any questions, concerns, or require assistance with your Yaheetech bar stools, please contact our customer support team. Contact information can typically be found on our official weblloc web o a l'embalatge del producte.

	Guia d'instal·lació de la cadira de joc ergonòmica Yaheetech Instruccions pas a pas i llista de peces per muntar la cadira de joc ergonòmica Yaheetech, amb suport lumbar de massatge i reposapeus ajustable. Assegureu-vos de configurar-la correctament per a una comoditat i un rendiment òptims.
	Instruccions de muntatge del reclinable de pell sintètica Yaheetech Mcghee Step-by-step assembly instructions and safety guidelines for the Yaheetech Mcghee Faux Leather Recliner. Learn how to quickly and safely assemble your new furniture.
	Instruccions de muntatge del reclinable de pell sintètica Yaheetech Mcghee Instruccions detallades de muntatge i pautes de seguretat per a la butaca reclinable de pell sintètica Yaheetech Mcghee. Apreneu a muntar de manera ràpida i segura la vostra nova butaca reclinable.
	Yaheetech 611055 Adjustable Drafting Table with Stool - Assembly Manual Comprehensive assembly instructions for the Yaheetech 611055 adjustable drafting table and stool. Includes parts list, step-by-step guide, and important safety information.
	Yaheetech 614123 Kitchen Island Assembly Instructions Detailed assembly instructions for the Yaheetech 614123 kitchen island, a rolling storage trolley with extendable tabletop and multiple storage options.
	Yaheetech Office Chair Assembly and Care Instructions (Models 592998, 592999, 593023, 593025) Detailed assembly guide and care instructions for Yaheetech office chairs, including models 592998, 592999, 593023, and 593025. This manual covers parts identification, step-by-step assembly, height and recline adjustments, and maintenance tips.