1. Introducció
This user manual provides detailed instructions for the DROK DC Battery Monitor, a versatile multimeter designed to measure various electrical parameters. It is equipped with a Hall sensor for isolated measurement and features a full-view STN LCD display for clear readability in diverse lighting conditions. This device is ideal for monitoring battery capacity, voltage, current, power, and accumulated energy in DC systems.
2. Característiques clau
- Multifunctional Measurement: Measures percentage i AH de la capacitat restant, corrent bidireccional positiu i negatiu DC, vol DCtage, DC positive and negative power, and DC positive and negative bidirectional accumulated electric energy.
- Ampli rang de mesura: Voltage measurement range is DC 0-300V, current measurement range is 0-200A.
- Hall Sensor for Isolated Measurement: Comes with a Hall transformer for reliable and safe isolated measurements.
- Cablejat fàcil: Supports two-wire and three-wire system connections, powered by DC 5-90V.
- Complet-view STN LCD Display: Backlight control and clear visibility day or night, indoors or outdoors.
- Funció d'alarma: Flashes and alarms for high/low voltage, high current, and low battery capacity.
- Shielded Wire Options: Available with 0.5m or 2.5m shielded wire for flexible installation.
3. Contingut del paquet
Si us plau, comproveu el contingut del paquet en rebre'l per assegurar-vos que hi hagi tots els components:
- DROK DC Battery Monitor Display Unit
- Hall Current Sensor (Transformer)
- Shielded Wire (0.5m or 2.5m, depending on model)
- Cables de connexió
Figura 3.1: Mésview of the DROK DC Battery Monitor and its components, showing two units with their respective Hall sensors and shielded wires.
4. Configuració i instal·lació
4.1 Identificació de components
Figure 4.1: Front panel display and button identification. Labels include "Remaining capacity AH of battery", "Remaining capacity of battery", "Menu/save key", "Positive and negative power display", "Backlight/+ key", and "Positive and negative accumulated electric energy display".
4.2 Esquemes de cablejat
The monitor supports both two-wire and three-wire system connections. Ensure correct polarity and connection of the Hall sensor.
Figure 4.2: Standard wiring diagram. The triangle icon on the transformer should point to the load's direction when measuring the positive lead.
Figure 4.3: Wiring diagram with an external DC 5-100V power supply. This configuration is used when the monitor's power supply is separate from the measured circuit.
Nota important: The triangle icon on the Hall transformer indicates the direction for measuring the positive lead. Ensure it points towards the load or controller for accurate readings.
5. Instruccions de funcionament
5.1 Mostra finalview
El ple-view STN LCD display shows various parameters simultaneously:
- Icona de la bateria: Indicates remaining capacity percentage.
- AH: Capacitat restant a Ampe-hores.
- A: Current (positive or negative, indicating charge/discharge).
- V: Voltage.
- W: Power (positive or negative).
- WH: Accumulated electric energy (positive or negative).
5.2 Funcions dels botons
- Menu/Save Key (Top Right): Used to enter menu settings and save changes.
- Backlight/+ Key (Bottom Right): Toggles backlight ON/OFF and navigates menu options.
5.3 Alarming Function
The monitor features an alarming function to alert users to critical conditions:
- Voltage Alarma: The display will flash if the real voltage is higher or lower than the preset alarming voltage.
- Alarma actual: The display will flash if the real current exceeds the preset current limit.
- Low Capacity Alarm: The display will flash to remind you to charge your device when the remaining battery capacity is low.
Refer to the detailed settings section (not provided in this manual) for instructions on how to set alarm thresholds.
6. Manteniment
To ensure the longevity and accurate operation of your DROK DC Battery Monitor, follow these maintenance guidelines:
- Neteja: Feu servir un drap suau i sec per netejar la pantalla iasing. No utilitzeu productes de neteja abrasius ni dissolvents.
- Medi ambient: Feu funcionar i guardeu el dispositiu en un ambient sec, allunyat de la llum solar directa, temperatures extremes i humitat elevada.
- Connexions: Reviseu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
- Evitar l'impacte: Protegiu el dispositiu de cops físics i caigudes.
7. Solució De Problemes
If you encounter issues with your DROK DC Battery Monitor, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc | Sense subministrament elèctric; cablejat incorrecte. | Check power connections (DC 5-90V). Verify wiring according to diagrams in Section 4.2. |
| Lectures inexactes | Incorrect Hall sensor orientation; faulty wiring; sensor not properly installed. | Ensure the triangle icon on the Hall sensor points in the correct direction. Recheck all wiring. Ensure the current-carrying wire passes cleanly through the sensor's aperture. |
| Alarm constantly active | Parameters outside preset thresholds; incorrect alarm settings. | Comprova el volum realtage/current/capacity against alarm settings. Adjust alarm thresholds if necessary (refer to advanced settings, if applicable). |
| Els botons no responen | Error temporal de programari; danys físics. | Disconnect power for a few seconds and reconnect. If problem persists, contact customer support. |
8. Especificacions
| Paràmetre | Valor |
|---|---|
| Marca | DROK |
| Número de model | f55fd3b6-653f-4039-89b8-9bb4e9f3c2ff |
| Voltage Interval de mesura | DC 0-300V |
| Interval de mesura actual | 0-200A |
| Font d'alimentació | Battery Powered, Electric (DC 5-90V for meter) |
| Tipus de visualització | Complet-view STN LCD |
| Tipus de mesura | Multímetre |
| Color | Negre |
| Primera data disponible | 25 de gener de 2021 |
9. Garantia i Suport
DROK products are designed for reliability and performance. For warranty information and technical support, please refer to the following:
- Garantia: This product typically comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims. Specific warranty terms may vary by region and retailer.
- Atenció al client: For technical assistance, troubleshooting, or inquiries regarding your DROK DC Battery Monitor, please visit the official DROK store on Amazon or contact their customer service directly.
- Recursos en línia: Additional resources, FAQs, and updated information may be available on the manufacturer's weblloc web o pàgina de producte.
Nota: The return policy for this product is 30 days for refund/replacement, as per Amazon's policy at the time of purchase. This does not affect your manufacturer's warranty rights.
