WORK SHARP MK2 Professional Electric Knife and Tool Sharpener User Manual

1. Introducció

The WORK SHARP MK2 Professional Electric Knife and Tool Sharpener (Model WSKTS2) is designed to provide precise and repeatable sharpening for a wide range of cutting tools. This manual outlines the proper use, maintenance, and safety procedures to ensure optimal performance and longevity of your sharpener. Please read all instructions carefully before operating the device.

Image 1: The Work Sharp MK2 Professional Electric Knife and Tool Sharpener. This image displays the sharpener from a side angle, highlighting its ergonomic handle and the sharpening module with abrasive belts.

2. Pautes de seguretat

Always observe the following safety precautions when using the Work Sharp MK2:

• Llegeix totes les instruccions: Familiarize yourself with the operation and safety procedures before use.
• Protecció ocular: Always wear safety glasses to protect against flying debris.
• Protecció de les mans: Use cut-resistant gloves to protect hands from sharp edges.
• Superfície estable: Operate the sharpener on a stable, non-slip surface.
• Mantenir clar: Mantingueu els dits, els cabells i la roba solta lluny de les peces mòbils.
• Desendolleu-lo quan no estigui en ús: Disconnect from power before cleaning, maintenance, or changing belts.
• Eviteu el sobreescalfament: Do not apply excessive pressure, which can cause the motor to overheat or damage the blade.
• Ventilació adequada: Utilitzeu-ho en una zona ben ventilada.
• No per a nens: Mantenir fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• WORK SHARP MK2 Electric Knife and Tool Sharpener
• Adjustable Sharpening Guides (20° and 25°)
• Abrasive Belt Kit (typically includes Coarse, Medium, and Fine grit belts)
• Manual d'usuari

4. Producte acabatview i Components

The Work Sharp MK2 features several key components designed for efficient and precise sharpening:

Image 2: Diagram illustrating the key components of the Work Sharp MK2. This image highlights the 20° & 25° angle guides, flexible abrasive belts, speed control, rotating cassette, and edge guide.

• 20° & 25° Angle Guides: Integrated guides for consistent sharpening angles for kitchen knives (20°) and outdoor/thicker knives (25°).
• Flexible Abrasive Belts: Conforms to blade edges, allowing sharpening of various blade profiles. Includes coarse, medium, and fine grits.
• Control de velocitat: Two-speed motor for optimal control. Low speed is recommended for knives, and high speed for tools.
• Rotating Cassette: Adjustable mechanism for sharpening different types of knives, scissors, and tools.
• Guia de vores: Assists in maintaining a consistent edge during sharpening.

5. Configuració

Seguiu aquests passos per a la configuració inicial:

1. Desembalar: Traieu tots els components de l'embalatge.
2. Col·locació: Place the sharpener on a stable, flat, and clean workbench or surface. Ensure adequate space around the unit for safe operation.
3. Install Abrasive Belt: Refer to Section 6.5 for detailed instructions on installing the appropriate abrasive belt. Start with a coarse grit belt for dull knives or tools.
4. Connexió d'alimentació: Connecteu l'afilador a una presa de corrent estàndard.

6. Funcionament

The Work Sharp MK2 is designed to sharpen a variety of tools. Always ensure the sharpener is securely placed and you are wearing appropriate safety gear.

6.1 General Sharpening Principles

• Always pull the blade through the sharpening guide, never push.
• Use light, consistent pressure. Let the abrasive belt do the work.
• Alternate sides of the blade with each pass to maintain a symmetrical edge.
• Progress through grits from coarse to fine for best results.

6.2 Knife Sharpening (20° and 25° Guides)

Image 3: A graphic illustrating the diverse range of items that can be sharpened with the Work Sharp MK2, including pocket knives, pruners, kitchen knives, general tools, serrated knives, and scissors.

1. Selecciona l'angle: Choose the 20° guide for most kitchen knives or the 25° guide for outdoor and thicker blades.
2. Seleccioneu la velocitat: Set the sharpener to the low-speed setting for knives.
3. Esmolar: Place the heel of the blade into the chosen guide slot. With light, consistent pressure, pull the blade through the slot, maintaining contact with the abrasive belt from heel to tip.
4. Costats alternatius: After one pass on one side, switch to the other side of the blade and repeat the process. Continue alternating passes until a burr forms along the entire edge.
5. Refine Edge: Switch to a finer grit belt (e.g., medium, then fine) and repeat the sharpening process with fewer passes on each side to refine the edge.

Image 4: A user sharpening a straight-edge knife using the Work Sharp MK2. The image shows the knife blade being pulled through the sharpening guide, making contact with the abrasive belt.

6.3 Serrated Knife Sharpening

1. Preparació: Use the fine grit belt.
2. Esmolar: Carefully insert each serration into the sharpening guide, pulling it through individually. Focus on sharpening only the serrated edge, not the flat side of the blade.
3. Desbarbar: Lightly pass the flat side of the serrated blade over the back of the fine grit belt to remove any burr.

Image 5: A user sharpening a serrated knife with the Work Sharp MK2. The image shows the serrated edge being carefully guided through the sharpener.

6.4 Scissor Sharpening

1. Preparació: Use the fine grit belt.
2. Esmolar: Open the scissors fully. Place one blade into the designated scissor sharpening slot (if available, otherwise use the 20° guide carefully). Pull the blade through, maintaining the factory angle. Repeat for the other blade.

Image 6: A user sharpening a pair of scissors using the Work Sharp MK2. The image shows one blade of the scissors being guided through the sharpening mechanism.

6.5 Tool Sharpening (e.g., Axes, Pruners)

1. Seleccioneu la velocitat: Set the sharpener to the high-speed setting for tools.
2. Esmolar: For larger tools like axes or pruners, use the coarse grit belt. Carefully guide the cutting edge of the tool against the abrasive belt, following the existing bevel. Use controlled, even strokes.
3. Refine: Progress to finer grit belts as needed to achieve the desired sharpness.

Image 7: A user sharpening an axe with the Work Sharp MK2. The image captures sparks generated during the sharpening process, indicating the abrasive belt is actively working on the axe blade.

6.6 Abrasive Belt Replacement

1. Desconnecteu l'alimentació: Always unplug the sharpener before changing belts.
2. Treure el cinturó vell: Locate the belt tension release lever or mechanism. Release the tension and carefully slide the old belt off the rollers.
3. Instal·lar cinturó nou: Slide the new abrasive belt onto the rollers, ensuring it is centered and the grit direction (if indicated) is correct.
4. Tension Belt: Engage the belt tension mechanism to secure the new belt.
5. Prova: Briefly plug in and turn on the sharpener to ensure the belt tracks correctly before resuming sharpening.

7. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment del vostre esmolador:

• Neteja: After each use, unplug the sharpener and use a dry brush or compressed air to remove metal dust and abrasive particles from the guides and belt area.
• Inspecció del cinturó: Regularly inspect abrasive belts for wear and tear. Replace worn belts promptly to maintain sharpening effectiveness and prevent damage to blades.
• Emmagatzematge: Store the sharpener in a clean, dry place away from dust and moisture.

8. Solució De Problemes

Aquí teniu solucions a problemes comuns:

9. Especificacions

10. Garantia i Suport

The WORK SHARP MK2 Professional Electric Knife and Tool Sharpener comes with a 3 any de garantia. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical support, or to purchase replacement parts and abrasive belts, please contact WORK SHARP customer service. Detailed contact information can typically be found on the official WORK SHARP weblloc web o a l'embalatge del producte.

Each sharpener is meticulously designed and quality-checked at our Oregon facility. We stand behind our products and are committed to providing excellent customer service.