Manual d'usuari de l'estació meteorològica sense fil BRESSER Beaufort 5 en 1 Centre Meteorològic

1. Producte acabatview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. Configuració

2.1 Desembalatge i comprovació de components

Desembaleu amb cura tots els components i assegureu-vos que hi hagi els elements següents:

• Unitat de visualització principal
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• Manual d'instruccions

2.2 Instal·lació de la bateria

Unitat de visualització principal: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Outdoor Sensor Placement and Mounting

La col·locació correcta del sensor exterior és crucial per a unes lectures precises.

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

Imatge: Lateral view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 Sincronització inicial

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 Configuració de la data i l'hora

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. Funcionament de l'estació meteorològica

3.1 Mostra finalview

The main display unit presents various weather parameters:

• SORTIDA: Temperatura i humitat exteriors.
• EN: Temperatura i humitat interiors.
• VENT: Current wind speed and direction, including gust speed.
• PREVISIÓ: Weather forecast icons (sunny, cloudy, rainy, etc.).
• BARO: Lectures de pressió baromètrica.
• RAINFALL: Acumulació de pluja diària, setmanal o mensual.
• HORA / DATA: Current time, date, and day of the week.
• BEAUFORT: Beaufort scale indicator for wind force.
• REFRIGERACIÓ EINDLICA: Calculated wind chill temperature.

Imatge: Frontal view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 Funcions dels botons

The display unit features several buttons for navigation and settings:

• HISTÒRIA: View historical data for various parameters.
• MÀXIM / MÍN: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• LLUM: Adjust backlight brightness or activate temporary backlight.
• MODE/SET: Enter settings mode or confirm selections.
• Fletxes AMUNT/AVALL: Navigate through menus or adjust values.

3.3 Configuració d'alarmes

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4 Selecció d'unitats

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. Manteniment

4.1 Substitució de la bateria

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 Neteja

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3 Atenció general

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5. Solució De Problemes

• No hi ha cap pantalla a la unitat principal: Check power adapter connection and backup battery.
• Sense dades a l'aire lliure: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• Lectures inexactes: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• Hora/data incorrecta: If RCC synchronization fails, manually set the time and date.

6. Especificacions

7. Garantia i Suport

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.