1. Producte acabatview
The AK Interactive Fine Metal Primer is a high-quality spray product with a grey tone, specifically formulated for priming metal parts. It offers high opacity once dry and can be applied directly over metal surfaces. This primer is ultra-resistant and provides excellent adherence, making it ideal for model building and hobby applications.
Image: AK Interactive Fine Metal Primer Spray Can (150ml). The can features the AK Interactive logo, 'FINE METAL PRIMER' text, and the product code 'AK1016'.
2. Precaucions de seguretat
Always prioritize safety when working with aerosol products. Read and understand all warnings on the product label before use.
- Ventilació: Use in a well-ventilated area. Avoid breathing vapors. If working indoors, ensure adequate airflow or use a respirator.
- Inflamabilitat: This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke during application.
- Protecció ocular: Wear appropriate eye protection (e.g., safety glasses or goggles) to prevent accidental spray contact.
- Protecció de la pell: Wear gloves to prevent prolonged or repeated skin contact. Wash hands thoroughly after handling.
- Emmagatzematge: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children and pets.
- Eliminació: Dispose of empty cans and any unused product according to local regulations. Do not puncture or incinerate cans, even when empty.
3. Preparació
Proper preparation ensures optimal adhesion and finish.
- Superfície neta: Thoroughly clean and degrease the metal parts to be painted. Any dirt, oil, or residue can compromise primer adhesion.
- Àrea de treball: Ensure your work area is clean, well-lit, and well-ventilated. Protect surrounding surfaces from overspray using drop cloths or newspaper.
- Temperatura: Apply in a moderate temperature environment, ideally between 15°C and 25°C (59°F and 77°F), and avoid high humidity.
4. Instruccions d'aplicació
4.1. Abans d'utilitzar
- Agitar bé: Before each use, shake the spray can vigorously for at least one minute after the mixing ball begins to rattle. This ensures a good mixture of the paint components.
4.2. Aplicació
- Posicionament: Hold the can in a vertical position during application.
- Distància: Maintain a distance of approximately 25 cm (10 inches) from the surface you are priming.
- Coats: Apply the primer in fast, thin, and even coats. Avoid applying a thick single coat, as this can lead to drips or an uneven finish.
- Temps d'assecat: Allow approximately 5 minutes of drying time between layers. This allows the previous coat to flash off and prevents solvent trapping.
- Curat: The synthetic lacquer cures in a short period of time, providing a durable base for subsequent paint layers. Full cure time is approximately 5 minutes per layer.
5. Post-Application Care
- Clear Nozzle: To prevent the diffuser from becoming obstructed, turn the can upside down immediately after painting. Hold the spray nozzle down for a few seconds until only clear gas emerges. This clears any remaining paint from the nozzle.
- Emmagatzematge: Store the can upright in a cool, dry, and well-ventilated area, away from direct sunlight and freezing temperatures. Ensure the cap is securely placed.
6. Solució De Problemes
6.1. Clogged Nozzle
- Símptoma: Paint does not spray, or sprays unevenly.
- Solució: Ensure you have followed the post-application care step (clearing the nozzle by inverting the can and spraying). If the nozzle is still clogged, you may attempt to carefully clean it with a thin wire or replace the nozzle if a spare is available.
7. Especificacions tècniques
| Característica | Detall |
|---|---|
| Marca | AK Interactive |
| Número de model | AK1016 |
| Color | Gris |
| Tipus d'acabat | Mat |
| Volum de l'article | 150 mil·lilitres |
| Recompte d'unitats | 5.07 unces líquides |
| Tipus de pintura | Spray |
| Usos específics | Interior/Exterior (for models) |
| Recomanació de superfície | Metall |
| Formulari d'article | Aerosol |
| Temps de curació completa | 5 Minutes (per layer) |
| Nivell de resistència a l'aigua | Resistent a l'aigua |
| UPC | 689358638525 |
8. Informació de la garantia
AK Interactive products are manufactured to high standards. For specific warranty details regarding this product, please refer to the product packaging or visit the official AK Interactive weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
9. Atenció al client
For further assistance, technical questions, or support regarding the AK Interactive Fine Metal Primer, please contact AK Interactive customer service through their official website or authorized distributors. Provide the product model number (AK1016) when seeking support.
