Introducció
Thank you for choosing the VIOMI Alpha S9 Robot Vacuum-Mop. This intelligent cleaning device is designed to provide efficient and hands-free floor cleaning, combining powerful vacuuming with effective mopping capabilities. Equipped with advanced navigation and smart features, it ensures a thorough clean of your home. Please read this manual carefully before use to ensure proper operation and maintenance.
Contingut del paquet
Abans de començar, comproveu que tots els elements siguin presents al paquet:
- 1x Cleaning Robot
- 1x Auto Disposal Station
- 3x Dust Bags
- 1x adaptador de corrent
- 1x Reusable Wet Mop
- 10x Disposable Mops
- 1x Mop Bracket
- 1x 2-in-1 Tank (Dust Box and Water Tank)
- 2 raspalls laterals
- 1x Eina de neteja
- 1x Manual del producte
Image: Contents of the VIOMI Alpha S9 package, including the robot, auto disposal station, and various accessories.
Producte acabatview
The VIOMI Alpha S9 is designed with several key features to optimize your cleaning experience:
- Strong 2700Pa Suction: Equipped with a Japan-made Nidec brushless motor, providing powerful suction for thorough cleaning. Suction strength is adjustable via the Mi Home app.
- Bateria de 5200 mAh: Offers up to 220 minutes of runtime, capable of cleaning areas up to 3000 sq ft on a single charge. Features recharge and resume functionality.
- 2-in-1 Hybrid Tank: Combines a 300ml dust box and a 250ml water tank, allowing for simultaneous sweeping, vacuuming, and mopping. The intelligent Y-type mopping simulates manual cleaning for higher coverage.
- Estació d'autobuidament: Provides up to 60 days of hands-free cleaning with a 3L dust bag capacity. The station automatically empties the robot's dustbin.
- Navegació LiDAR: Ensures 100% accuracy and coverage with smart navigation, utilizing anti-collision, anti-drop, and wall sensors.
- Intelligent Zoning: Manage cleaning areas, set no-go zones, virtual walls, and schedules through the Xiaomi Mi Home app. Supports multi-floor mapping for up to 5 floors.
Image: The VIOMI Alpha S9 robot vacuum and its accompanying auto disposal station.
Image: The VIOMI Alpha S9 robot and its station positioned in a living space, ready for operation.
Imatge: Una imatge interna view illustrating the patented auto-dumping rear-suction base, designed for efficient dust transfer.
Guia de configuració
- Desempaquetar el dispositiu: Carefully remove the robot, auto disposal station, and all accessories from the packaging.
- Place the Auto Disposal Station:
- Place the station on a hard, level surface against a wall.
- Ensure there is at least 0.5 meters of clear space on both sides and 1.5 meters in front of the station for optimal navigation.
- Connect the power adaptor to the station and plug it into a power outlet.
- Instal·leu els raspalls laterals: Encaixeu els raspalls laterals a les ranures designades a la part inferior del robot.
- Install 2-in-1 Tank: Open the robot's top cover, insert the 2-in-1 tank (dust box and water tank) into its compartment, and close the cover.
- Càrrega inicial: Place the robot onto the auto disposal station. Ensure the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot.
- Descarrega l'aplicació Mi Home: Scan the QR code in the product manual or search for "Mi Home" in your app store (Google Play Store or Apple App Store) to download the application.
- Connecta't a l'aplicació:
- Obre l'aplicació Mi Home i crea un compte o inicia la sessió.
- Tap "+" to add a new device. The app should detect the VIOMI Alpha S9 automatically. If not, manually search for it.
- Follow the in-app instructions to connect the robot to your home Wi-Fi network (2.4GHz only). Ensure your phone's Bluetooth is on and your Wi-Fi has internet access during this process.
Instruccions de funcionament
Using the Mi Home App
The Mi Home app is the primary interface for controlling your VIOMI Alpha S9. It offers comprehensive control and customization options:
- Inicia/Pausa la neteja: Tap the "Clean" button in the app to start or pause a cleaning cycle.
- Ajust de potència d'aspiració: Select from multiple suction modes (e.g., Quiet, Standard, Strong, Turbo) to suit different cleaning needs.
- Control del nivell d'aigua: For mopping, adjust the water output level (e.g., Low, Medium, High) based on floor type and desired moisture.
- Mapping and Zoning:
- The robot will create a map of your home during its first cleaning cycle using LiDAR navigation.
- Mapatge de diverses plantes: The app supports saving maps for multiple floors (up to 5).
- Virtual Walls & No-Go Zones: Dibuixa límits virtuals al mapa per restringir l'entrada del robot a determinades zones.
- No-Mop Zones: Designate areas where the robot should vacuum but not mop (e.g., carpeted areas).
- Area-wise Cleaning: Select specific rooms or areas on the map for targeted cleaning. You can merge, divide, and name map partitions.
- Point Cleaning: Direct the robot to clean a specific spot on the map.
- Programació: Set up daily or weekly cleaning schedules for automated cleaning.
- Recarrega i reprèn: If the battery runs low during a cleaning cycle, the robot will automatically return to the station to recharge and then resume cleaning from where it left off.
Funció de neteja
Per utilitzar la funció de fregar:
- Fill the 2-in-1 tank with clean water. Do not add cleaning solutions directly to the water tank as it may damage the internal components.
- Attach the reusable wet mop cloth to the mop bracket and then slide the mop bracket onto the 2-in-1 tank. For best results, slightly wet the mop cloth before attaching it.
- Ensure the 2-in-1 tank is properly installed in the robot.
- Select the desired water level in the Mi Home app. The intelligent Y-type mopping pattern simulates manual cleaning for enhanced effectiveness.
Image: Illustration of the smart cleaning routing pattern, designed to simulate human cleaning habits for thorough coverage.
Image: The robot vacuum automatically emptying its dustbin into the auto disposal station, providing hands-free maintenance.
Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your VIOMI Alpha S9.
Neteja de caixes de pols i filtres
- Remove the 2-in-1 tank from the robot.
- Obriu el compartiment de la caixa de pols i buideu-ne el contingut en una paperera.
- Remove the filter and gently tap it to dislodge dust. You can rinse the filter under running water, but ensure it is completely dry before re-installing.
- Clean the dust box with a dry cloth.
- Re-install the filter and close the dust box.
Main Brush and Side Brush Cleaning
- Doneu la volta al robot.
- Traieu la coberta del raspall principal i aixequeu el raspall principal. Feu servir l'eina de neteja proporcionada per tallar i eliminar els cabells o les restes enredats.
- Pull off the side brushes. Remove any hair or debris wrapped around them.
- Clean the brush compartments and re-install the brushes.
Mop Cloth Cleaning
- After each mopping session, remove the reusable wet mop cloth from the mop bracket.
- Rinse the mop cloth thoroughly under running water until clean.
- Allow the mop cloth to air dry completely before re-attaching or storing.
- Disposable mop cloths should be discarded after use.
Neteja del sensor
Wipe all sensors (anti-drop, wall, and charging contacts) on the robot and the auto disposal station with a soft, dry cloth regularly to ensure accurate navigation.
Image: A collection of VIOMI Alpha S9 maintenance parts, including the main brush, side brushes, dust bag, and filter, essential for routine upkeep.
Resolució de problemes
If you encounter issues with your VIOMI Alpha S9, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Robot does not return to base station after power cut. | Robot may not "remember" its docked state when power is lost. | Manually place the robot back on the station or turn off the robot when it's near the dock and not charging. Ensure the station has stable power. |
| Mop does not clean close to walls/edges. | The mop attachment is not as wide as the robot's body, limiting edge reach. | This is a design characteristic. For thorough edge cleaning, manual spot cleaning may be required. The spinning brush helps with vacuuming edges. |
| Disposable mop cloths leave streaks or are ineffective. | Disposable cloths may not make consistent contact with the floor. | Use the reusable microfiber mop cloth for better mopping performance. Ensure it is properly attached and slightly pre-wet. |
| Map in app appears distorted or overlaid. | Possible software glitch or environmental changes affecting mapping. | Try restarting the robot and the app. If the issue persists, consider re-mapping the area. Ensure no significant changes in furniture layout occur frequently. |
| Robot gets stuck or avoids areas with curtains. | Robot sensors may interpret curtains as obstacles. | Lift curtains or use virtual walls/no-go zones to manage these areas. |
| Robot stops and indicates an obstacle, but none is present. | Dirty sensors or temporary sensor malfunction. | Clean all sensors with a dry cloth. Restart the robot. If persistent, contact customer support. |
| Cannot connect robot to Mi Home app. | Incorrect Wi-Fi settings, Bluetooth off, or network issues. | Ensure your phone's Bluetooth is on. Verify your Wi-Fi is 2.4GHz and has internet access. Restart your router and try the connection process again. |
Image: The robot vacuum demonstrating intelligent obstacle recognition and automatic avoidance, navigating around a pet.
Especificacions
| Característica | Detall |
|---|---|
| Marca | VIOMI |
| Nom del model | Alpha S9 - Black |
| Número de model de l'article | S9 UV |
| Característica especial | Bag (for auto disposal station) |
| Color | Negre |
| Dimensions del producte | 35L x 35W x 9.8H centímetres |
| Pes de l'article | 11 kg 300 g |
| Tipus de filtre | Bossa |
| Voltage | 220 volts (CC) |
| Capacitat del dipòsit d'aigua | 0.25 litres (250 ml) |
| Dustbin Capacity (Robot) | 0.3 litres (300 ml) |
| Capacitat de la bossa de pols (estació) | 3 litres |
| Font d'alimentació | Funciona amb bateria |
| Bateria inclosa | Sí |
| Capacitat de la bateria | 5200 mAh |
| Mètode de control | Aplicació (Mi Home) |
| Dispositius compatibles | Amazon Echo |
| Factor de forma | Robòtica |
| Potència d'aspiració | 2700 Pa |
| País d'origen | Xina |
Garantia i Suport
VIOMI provides comprehensive support for its products. For any issues or inquiries, please refer to the following:
- Xarxa de serveis: VIOMI has a PAN INDIA SERVICING NETWORK with service centers available in major cities including Mumbai, Bangalore, Hyderabad, Delhi, Pune, Ahmedabad, Chennai, Kolkata, Goa, Chandigarh, Jaipur, Lucknow, Trivandrum, Bhopal, Coimbatore, Cochin, Vijayawada, Madurai, Vizag, and Patna. More cities are expected to be added.
- Contacte amb l'assistència: For technical assistance, warranty claims, or service requests, please contact VIOMI customer support through the contact information provided on the official VIOMI website or within the Mi Home application.
- Manual de producte: Keep this product manual for future reference.
