Introducció
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Scheppach KAP254PRO miter saw. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage. Keep this manual in a safe place for future reference.
Image: The Scheppach KAP254PRO miter saw, showcasing its robust design and integrated laser guide.
Instruccions de seguretat
Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Utilitzeu l'equip de protecció individual (EPI) adequat: Porteu sempre ulleres de seguretat, protecció auditiva i una màscara antipols. Eviteu roba ampla o joies que es puguin enganxar a les peces mòbils.
- Garantir un entorn de treball segur: Keep the work area clean, well-lit, and free from obstructions. Do not operate the saw in damp o condicions humides.
- Assegureu la peça de treball: Sempre clamp the workpiece firmly to the fence and table before making a cut. Never hold the workpiece by hand.
- Maintain proper posture: Keep a balanced stance and avoid overreaching. Do not force the saw; let the blade do the work.
- Inspeccioneu la fulla: Before each use, check the saw blade for cracks, missing teeth, or damage. Replace damaged blades immediately.
- Use the blade guard: Ensure the blade guard is functioning correctly and always in place.
- Unplug before adjustments or maintenance: Always disconnect the saw from the power source before changing blades, making adjustments, or performing any maintenance.
- Mantingueu les mans allunyades: Never place hands near the cutting path or blade.
- Eviteu l'arrencada accidental: Assegureu-vos que l'interruptor estigui en la posició OFF abans d'endollar l'eina.
- Do not modify the tool: Unauthorized modifications can compromise safety and void the warranty.
Producte acabatview
The Scheppach KAP254PRO is a powerful miter saw designed for precise cutting of wood and plastic. Key features include:
- Potent motor de 2000 W: Proporciona ample power for various cutting tasks.
- Làser integrat: For precise alignment and accurate cut line indication.
- Llum de treball LED: Il·lumina la zona de tall per a una millor visibilitat.
- Fully Enclosed Blade Guard: Millora la seguretat durant el funcionament.
- HW Saw Blade: High-quality blade for consistent and precise cutting results.
- Disseny compacte: Suitable for smaller workshops.
- Aluminum Workpiece Supports: Provides stable support for materials.
- Rotary Table with Quick Lock: Allows for quick and accurate angle adjustments.
Imatge: Detallada view of the Scheppach KAP254PRO miter saw, highlighting its main components.
Configuració
Follow these steps for initial setup of your miter saw:
- Desembalatge: Traieu amb cura tots els components de l'embalatge. Inspeccioneu-ho per veure si hi ha danys durant l'enviament.
- Muntatge: Securely mount the miter saw to a stable workbench using appropriate bolts and washers. Ensure the workbench can support the weight and forces generated during operation.
- Instal·lació de la fulla (si no està preinstal·lada):
- Desconnecteu l'alimentació: Assegureu-vos que la serra estigui desendollada.
- Open blade guard: Lift the lower blade guard.
- Loosen arbor nut: Feu servir la clau anglesa proporcionada per afluixar la femella de l'eix mentre manteniu premut el botó de bloqueig de l'eix.
- Install blade: Place the new blade onto the arbor, ensuring the teeth are pointing in the correct direction (usually indicated by an arrow on the blade and saw).
- Tighten arbor nut: Securely tighten the arbor nut.
- Close blade guard: Ensure the blade guard returns to its proper position.
- Adjusting Fences and Stops: Verify that the fences are square to the blade and adjust if necessary. Familiarize yourself with the miter and bevel angle adjustment mechanisms.
- Laser and LED Alignment: Test the laser guide and LED worklight. Adjust the laser if it does not accurately indicate the cut line.
Instruccions de funcionament
Abans d'operar, assegureu-vos que enteneu i seguiu totes les precaucions de seguretat.
- Preparar la peça de treball: Marqueu clarament la línia de tall al material.
- Ajustar angles:
- Angle de bisell: Loosen the miter lock handle, rotate the turntable to the desired angle, and tighten the handle.
- Angle de bisell: Afloixeu el bloqueig del bisell, inclineu el capçal de la serra a l'angle desitjat i estrenyeu el bloqueig.
- Posicioneu la peça de treball: Place the workpiece firmly against the fence and on the saw table. Use clamps to secure it. Ensure the cut line aligns with the laser guide.
- Engegar la serra: Hold the handle firmly. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Fes el tall:
- For crosscuts: Slowly lower the saw head through the workpiece.
- For sliding cuts (if applicable): Pull the saw head forward, lower it into the workpiece, and push it smoothly backward through the material.
- Completa el tall: Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Treure la peça de treball: Only remove the cut material after the blade has come to a complete stop and the saw head is fully raised.
Manteniment
Regular maintenance ensures the longevity and safe operation of your miter saw. Always unplug the tool before performing any maintenance.
- Neteja: After each use, clean sawdust and debris from the saw, especially around the motor vents, blade guard, and table. Use a brush or compressed air. Do not use solvents.
- Substitució de la fulla: Replace dull or damaged blades promptly. Refer to the "Setup" section for blade installation instructions. Use only blades with the correct diameter (254mm) and arbor size.
- Lubricació: Periodically apply a light coat of machine oil to moving parts, such as the sliding mechanism (if applicable) and pivot points, to ensure smooth operation.
- Escombretes de carbó: Check the carbon brushes periodically. If they are worn down, replace them with genuine Scheppach replacement parts.
- Inspecció del cable d'alimentació: Inspeccioneu regularment el cable d'alimentació per detectar danys. Si està malmès, feu-lo reparar per un tècnic qualificat.
Resolució de problemes
Aquesta secció tracta els problemes habituals que podeu trobar. Per a problemes que no figuren aquí, poseu-vos en contacte amb l'atenció al client.
| Problema | Causa possible | Solució |
|---|---|---|
| La serra no arrenca | No power supply; faulty switch; motor overload. | Check power connection and circuit breaker. Ensure switch is fully engaged. Allow motor to cool if overloaded. |
| Blade not cutting cleanly | Dull or damaged blade; incorrect blade for material; improper feed rate. | Replace blade. Use appropriate blade for the material. Adjust feed rate. |
| Vibracions o sorolls excessius | Loose blade; damaged blade; worn motor bearings; loose mounting. | Tighten blade. Replace damaged blade. Check saw mounting. Contact service if bearings are suspected. |
| Laser guide is inaccurate | Laser needs adjustment; laser lens is dirty. | Clean laser lens. Refer to manual for laser adjustment procedure. |
Especificacions
Technical data for the Scheppach KAP254PRO miter saw:
- Número de model: KAP254PRO (5901216904)
- Potència: 2000 watts
- Voltage: 230 Volts
- Diàmetre de la fulla: 254 mm
- Nombre de dents: 48 (as per specifications, though title mentions 60) - Note: User should verify blade teeth count on actual product or packaging.
- Amplada màxima de tall (90°): 340 mm x 90 mm
- Pes: 17.62 kg
- Característiques especials: Integrated Laser, LED Worklight
- Superfície recomanada: Fusta, plàstic
- Font d'alimentació: Elèctric amb cable
- Material: Metal (handle/lever), Aluminium (workpiece supports)
Garantia i Suport
For warranty information, spare parts availability, or technical support, please contact Scheppach customer service directly. Refer to the product packaging or the official Scheppach weblloc per obtenir les dades de contacte específiques de la vostra regió.
