Introducció
This manual provides essential information for the proper use and maintenance of your Compustar 2WT13R-SF 2-Way Color LCD Remote. This remote is designed to provide advanced control and feedback for compatible Compustar vehicle security and remote start systems.
Compatibilitat
Nota important de compatibilitat:
- This remote ONLY works with the Compustar PRO-T13 System. It will NOT work with other systems.
- You MUST HAVE Compustar Antenna Model ANT-2WSF perquè aquest comandament a distància funcioni correctament.
Ensure your existing system meets these requirements before attempting to use this remote.
Producte acabatview
Característiques clau
- 2-Way Communication: Receive instant confirmation on the remote's LCD screen.
- Color LCD Display: Provides clear visual feedback on vehicle status.
- Up to 3 Mile Range: Extended operating range for convenience.
- Ergonomic Design: Comfortable to hold and use.
- Real-time Vehicle Status: Displays battery voltage and interior temperature (if supported by system).
Components remots
The Compustar 2WT13R-SF remote features a vibrant color LCD screen and intuitive buttons for controlling your vehicle's functions.
Imatge: Frontal view of the Compustar 2WT13R-SF remote, displaying its color LCD screen with vehicle status icons and control buttons.
Imatge: Anglesa view of the Compustar 2WT13R-SF remote, showcasing its sleek design and button placement.
Configuració
This remote is a replacement or additional remote for an existing Compustar PRO-T13 system. It requires programming to your vehicle's system to function.
Important: This package DOES NOT INCLUDE programming instructions. You must use the instructions that came with your PRO-T13 system or consult a certified Compustar installer for programming.
Typically, programming involves a sequence of steps using the vehicle's ignition and the remote's buttons. Refer to your PRO-T13 system's installation or user manual for detailed programming procedures.
Funcionament
The 2WT13R-SF remote provides intuitive control over your vehicle's functions. The exact functions and button presses may vary slightly based on your PRO-T13 system's configuration.
Funcions bàsiques:
- Bloqueig: Premeu el botó Bloqueig button (usually indicated by a closed padlock icon) once to lock your vehicle's doors. The remote will provide visual and audible confirmation.
- Desbloquejar: Premeu el botó Desbloqueja button (usually indicated by an open padlock icon) once to unlock your vehicle's doors. Confirmation will be displayed on the LCD.
- Inici/aturada remots: Manteniu premut el botó Inici/Parada button (often a power icon) for approximately 2-3 seconds to remote start or stop your vehicle. The LCD will show engine status.
- Alliberament del tronc: Manteniu premut el botó Tronc button (if available, usually an open trunk icon) for 2-3 seconds to pop the trunk.
- Pànic: Manteniu premut el botó Pànic button (if available, often a horn icon) for 2-3 seconds to activate the vehicle's alarm. Press again to disarm.
Refer to your PRO-T13 system manual for advanced features, custom button programming, and detailed LCD icon explanations.
Manteniment
Substitució de la bateria:
The 2WT13R-SF remote uses a replaceable battery. When the battery icon on the LCD indicates low power, or the remote's range decreases significantly, it's time to replace the battery.
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Carefully open the compartment using a small flat-head screwdriver or a coin.
- Note the orientation of the old battery and remove it.
- Insert a new battery (typically a CR2032 coin cell, but verify with your PRO-T13 manual or the remote's markings) with the positive (+) side facing up.
- Tanqueu el compartiment de la bateria de manera segura.
Cura i neteja:
- Avoid exposing the remote to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Protect the LCD screen from scratches. Consider purchasing a protective case.
Resolució de problemes
Problemes comuns i solucions:
- El comandament a distància no respon:
- Check the remote's battery and replace if low.
- Ensure you are within range of the vehicle and the ANT-2WSF antenna.
- Verify the remote is properly programmed to your PRO-T13 system. If unsure, consult your system's manual or a professional installer.
- Curt abast operatiu:
- Replace the remote's battery.
- Ensure there are no major obstructions (buildings, hills) between the remote and the vehicle.
- Comproveu si hi ha fonts d'interferències de ràdio a la zona.
- Problemes de la pantalla LCD:
- If the display is dim or flickering, replace the battery.
- If the display is blank, ensure the remote is powered on (if applicable) and the battery is charged.
For persistent issues, contact Compustar customer support or a certified Compustar dealer.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 2WT13R-SF |
| Marca | Compustar |
| Tecnologia de connectivitat | infrarojos (Note: While listed as Infrared, remote start systems typically use Radio Frequency for primary communication.) |
| Dispositius compatibles | Compustar PRO-T13 System |
| Nombre màxim de dispositius compatibles | 1 (per comandament a distància) |
| Característica especial | Ergonòmic |
| Pes de l'article | 1.76 unces |
| Dimensions del paquet | 4.53 x 2.44 x 1.18 polzades |
| Data de primera disponibilitat | 24 de març de 2021 |
Garantia i Suport
This Compustar product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Compustar PRO-T13 system or visit the official Compustar weblloc.
For technical support, troubleshooting assistance beyond this manual, or to locate a certified installer, please contact Compustar customer service or your authorized Compustar dealer.
