Manual d'usuari de la banyera d'hidromassatge Empava per a 2 persones

1. Producte acabatview

The Empava 71-inch Whirlpool Bathtub is designed for two persons, featuring 16 strategically placed water jets for a hydro-massage experience. Constructed from glossy white acrylic reinforced with fiberglass and supported by a stainless-steel frame, this tub is built for durability and insulation. It includes pre-installed accessories such as a waterfall faucet, knobs, a 45-inch showerhead, and pillows, providing a complete and comfortable spa experience in your home.

Imatge: De dalt a baix view of the Empava 2-person whirlpool bathtub, highlighting the arrangement of the 16 water jets and two integrated headrests.

2. Instruccions de seguretat importants

To reduce the risk of injury, electric shock, fire, or damage to the product, please adhere to the following safety guidelines:

• Always ensure the bathtub is properly grounded according to local electrical codes.
• Do not operate the whirlpool system without sufficient water in the tub to cover the jets.
• Maintain water temperature below 104°F (40°C) to prevent hyperthermia.
• Children should be supervised at all times when in or near the bathtub.
• Do not use abrasive cleaners or harsh chemicals that could damage the acrylic surface or internal components.
• The motor is UL Certified and comes with a pre-installed US standard 120V GFCI Power Cord. Do not modify or bypass this safety device.
• Avoid placing electrical appliances near the bathtub.

3. Components

Your Empava Whirlpool Bathtub package includes the following main components and accessories:

• Acrylic Whirlpool Bathtub Unit with integrated jets and motor
• Stainless-steel support frame
• 45" length showerhead
• Chrome polished drain
• Perilles de control
• Pillows (headrests)
• Waterfall faucet
• Pre-installed 120V GFCI Power Cord

Imatge: Frontal view of the Empava 2-person whirlpool bathtub, showcasing its design and the integrated headrests.

4. Configuració i instal·lació

4.1 Llista de comprovació prèvia a la instal·lació

• Verify product dimensions (70.8"L x 47.25"W x 26.7"H) against your bathroom space.
• Ensure the floor can support the weight of the tub filled with water (approx. 177 gallons + 180 lbs tub weight + user weight).
• Confirm availability of a 110V electrical outlet with proper grounding and GFCI protection.
• Ensure access to hot and cold water supply lines and a suitable drain connection.

4.2 Col·locació

Position the bathtub on a level, stable surface. Ensure adequate clearance around the tub for maintenance and access. The 3-side apron design is suitable for alcove installations.

4.3 Connexió elèctrica

The bathtub comes with a pre-installed 120V GFCI power cord. Connect this cord to a dedicated, properly grounded 110V electrical outlet. Do not use extension cords or adapters. Consult a qualified electrician if you are unsure about your electrical setup.

4.4 Connexió de fontaneria

Connect the hot and cold water supply lines to the designated inlets on the bathtub. Ensure all connections are secure and leak-free. Connect the bathtub drain to your household drainage system. The right-side drain configuration should align with your plumbing setup.

Image: Detailed dimension diagram, crucial for planning installation space and plumbing connections.

Imatge: Part inferior view of the bathtub, illustrating the robust stainless-steel frame and the pre-installed plumbing and electrical components.

5. Instruccions de funcionament

5.1 Omplir la banyera

Ensure the drain cover is closed. Use the waterfall faucet to fill the bathtub with water to the desired level. Ensure the water level is above the highest jets before activating the whirlpool system.

5.2 Activating Whirlpool Jets

Once the tub is filled, locate the pneumatic switch (air button) on the tub deck. Press this button to activate the 1.5 HP motor and engage the whirlpool jets. Press again to turn off the system.

5.3 Adjusting Jets

Some jets may allow for direction and flow adjustment. Rotate the outer ring of individual jets to change the direction of the water flow. For flow adjustment, refer to the specific jet design; some may allow for partial closure to increase pressure on other jets.

5.4 Draining the Bathtub

To drain the tub, rotate the chrome polished drain cover to the open position. The water will flow out through the right-side drain.

Image: Close-up of the ergonomic control knobs and the 45-inch showerhead, demonstrating ease of use.

6. Manteniment

6.1 Neteja de la banyera

For daily cleaning, wipe the acrylic surface with a soft cloth and a mild, non-abrasive bathroom cleaner. Rinse thoroughly with water. Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the glossy finish.

6.2 Cleaning the Jet System

Periodically, fill the tub with warm water above the jets and add a small amount of a non-foaming, non-abrasive jet cleaner or a few tablespoons of white vinegar. Run the whirlpool system for 10-15 minutes. Drain the tub and refill with clean water, running the jets again for a few minutes to rinse the system. This helps prevent buildup and maintain jet performance.

7. Solució De Problemes

8. Especificacions tècniques

9. Garantia i atenció al client

9.1 Informació de la garantia

The Empava 2 Person Whirlpool Bathtub comes with a 3-year limited manufacturer warranty. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use and service.

9.2 Atenció al client

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Empava customer support. You can find contact information on the official Empava weblloc web o a través del vostre distribuïdor.