1. Introducció
The Samson SP03 Lightweight Spider Shockmount is designed to provide superior isolation for select Samson condenser microphones. This shockmount effectively reduces unwanted vibrations and handling noise, ensuring cleaner audio recordings. Its lightweight design and robust construction make it an essential accessory for studio and live applications.
2. Característiques
- Lightweight suspension shockmount for easy portability and setup.
- Provides effective isolation for compatible Samson condenser microphones, minimizing vibrations and handling noise.
- Designed to fit all standard microphone stands and boom arms.
- Includes a 5/8" to 3/8" adapter for versatile mounting options.
- Compatible with Samson C01, C03, CL7, CL7A, CL8, CL8A, C01U, C01U Pro, and C03U microphones.
3. Compatibilitat
The SP03 shockmount is specifically engineered to work with the following Samson condenser microphone models:
- • Samson C01
- • Samson C03
- • Samson CL7
- • Samson CL7A
- • Samson CL8
- • Samson CL8A
- • Samson C01U
- • Samson C01U Pro
- • Samson C03U
Ensure your microphone model is listed above for optimal performance and fit.
4. Contingut del paquet
En obrir el paquet, comproveu que tots els components hi siguin presents i que estiguin en bon estat:
- Samson SP03 Lightweight Spider Shockmount
- 5/8" to 3/8" Thread Adapter
5. Instruccions de configuració
Fixar al peu de micròfon: Locate the threaded insert at the base of the SP03 shockmount. Screw the shockmount onto the 5/8" threaded post of your microphone stand or boom arm. If your stand has a 3/8" thread, use the included 5/8" to 3/8" adapter by screwing it into the shockmount first, then onto the stand.
Figura 5.1: A baix view of the SP03 shockmount, illustrating the threaded insert for secure attachment to a microphone stand or boom arm. The 5/8" thread is visible, ready for direct connection or use with the included 3/8" adapter.
Inseriu el micròfon: Gently push your compatible Samson condenser microphone into the center ring of the shockmount. The elastic bands will securely hold the microphone in place, providing suspension and isolating it from vibrations.
Figura 5.2: Part superior frontal view of the Samson SP03 shockmount, showcasing its spider-like suspension system designed to cradle and isolate a condenser microphone. The central opening is where the microphone is inserted.
Ajust d'angle: Use the adjustment knob on the side of the shockmount to loosen, adjust the angle of your microphone as needed, and then tighten to secure its position.
Figura 5.3: lateral view of the Samson SP03 shockmount, highlighting the angle adjustment knob. This knob allows users to precisely position the microphone for optimal sound capture.
6. Instruccions de funcionament
Once the SP03 shockmount is properly set up with your microphone, its operation is passive. It continuously works to absorb vibrations and handling noise, providing a cleaner audio signal to your recording device or mixer. No active controls are present on the shockmount itself.
7. Manteniment
- Neteja: Use a soft, dry cloth to wipe down the shockmount. Avoid using abrasive cleaners or solvents, as these can damage the plastic and elastic components.
- Elastic Bands: Periodically inspect the elastic suspension bands for any signs of wear, stretching, or damage. While durable, these bands may degrade over time with heavy use or exposure to extreme conditions. Replacement bands may be available from Samson customer support.
- Emmagatzematge: Store the shockmount in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Microphone not fitting securely. | Incompatible microphone model or worn elastic bands. | Verify your microphone is one of the compatible Samson models (C01, C03, CL7, CL7A, CL8, CL8A, C01U, C01U Pro, C03U). If bands are worn, consider replacing them. |
| Vibrations still audible in recordings. | Excessive vibration source, loose shockmount, or damaged elastic bands. | Ensure the shockmount is tightly secured to the microphone stand. Check elastic bands for damage. Reduce external vibration sources if possible. |
| Shockmount wobbles on stand. | Loose connection to stand or incorrect adapter use. | Tighten the shockmount onto the microphone stand. Ensure the 5/8" to 3/8" adapter is correctly used if required and fully tightened. |
9. Especificacions
| Model | SP03 |
| Pes de l'article | 7.9 unces (aproximadament 224 grams) |
| Dimensions del producte (L x A x A) | 6.75 x 4.85 x 3.1 polzades (aprox. 17.15 x 12.32 x 7.87 cm) |
| Material | Aluminum (as per specifications, though description implies plastic for some parts) |
| Color | Negre |
| País d'origen | Xina |
| Thread Compatibility | 5/8" (with included 3/8" adapter) |
10. Garantia i Suport
For warranty information and technical support, please refer to the official Samson Technologies weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Samson Technologies Official Weblloc: www.samsontech.com
For further assistance, you may also visit the Samson Store on Amazon: Samson Store
