Producte acabatview
This manual provides essential information for the safe and efficient operation of your Atlantic Cube 75L Electric Water Heater. Please read it thoroughly before installation and use.
The Atlantic Cube 75L Electric Water Heater is designed to provide a reliable supply of hot water for domestic use. Key features include:
- Capacitat: 75 litres
- Potència: 1500 watts
- Classe energètica: B
- Heating Element: Copper with O'PRO system for extended lifespan
- Material: Stainless Steel with DIAMANT ceramic finish (200 µm)
- Safety Features: Safety valve, automatic thermal protection, low oxygen safety shut-off
- Capacitat de calefacció ràpida
- Alimentació: 230 V / 50 Hz
- Manufactured in France
Informació de seguretat
Instruccions importants de seguretat:
- Llegiu totes les instruccions abans d'utilitzar aquest escalfador d'aigua.
- This appliance must be installed by a qualified professional in accordance with local regulations.
- Ensure the power supply matches the specifications of the water heater (230V / 50Hz).
- No feu funcionar l'escalfador d'aigua si està danyat o no funciona correctament.
- Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment o reparació.
- The water heater contains hot water under pressure. Exercise caution to prevent scalding.
- No bloquejar o noamper amb la vàlvula de seguretat.
- Mantingueu els materials inflamables allunyats de l'aparell.

Image: The Atlantic Cube 75L Electric Water Heater, white in color, mounted on a wall in a contemporary bathroom setting. The unit features a control dial at the bottom front. The bathroom includes a dark countertop with a copper-colored sink and wooden cabinetry.
Guia d'instal·lació
Instal·lació professional necessària: Installation of this electric water heater must be performed by a certified plumber or electrician to ensure compliance with all local codes and safety standards.
Desembalatge
- Carefully remove the water heater from its packaging.
- Inspect the unit for any signs of damage during transit. Do not install if damaged.
- Conserveu els materials d'embalatge per a possibles transports o devolucions futures.
Muntatge
- Select a suitable wall location capable of supporting the full weight of the water heater when filled with water (approx. 75 kg + 26 kg = 101 kg).
- Ensure adequate clearance around the unit for maintenance and ventilation.
- Mount the water heater securely using appropriate wall anchors and brackets (not specified if included, assume standard practice).
Connexions d'aigua
- Connecteu l'entrada d'aigua freda al port designat (normalment marcat amb blau o 'C').
- Connecteu la sortida d'aigua calenta al port designat (normalment marcat amb vermell o "H").
- Install the provided safety valve on the cold water inlet line. Ensure proper drainage for the safety valve discharge.
- Use appropriate plumbing fittings and sealants to prevent leaks.
Connexió elèctrica
- Ensure the main power supply is OFF at the circuit breaker before making any electrical connections.
- Connect the water heater to a dedicated 230V / 50Hz electrical circuit, protected by a suitable circuit breaker and residual current device (RCD).
- The appliance comes with a European plug. Ensure the outlet is compatible or have a qualified electrician install a suitable connection.
- Verify all electrical connections are secure and correctly wired according to local electrical codes.
Omplir l'escalfador d'aigua
- Before switching on the power, open a hot water tap in your home to allow air to escape.
- Slowly open the cold water supply valve to the water heater.
- Allow the water heater to fill completely until water flows steadily from the open hot water tap.
- Tanqueu l'aixeta de l'aigua calenta.
- Comproveu totes les connexions d'aigua per detectar fuites.
Instruccions de funcionament
Posada en marxa inicial
- After filling the water heater and checking for leaks, switch on the electrical power supply at the circuit breaker.
- The water heater will begin heating the water to the factory preset temperature or the last set temperature.
Ajust de temperatura
The water heater features a control dial, typically located at the bottom front of the unit (as seen in the product image).
- Rotate the dial clockwise to increase the water temperature.
- Rotate the dial counter-clockwise to decrease the water temperature.
- For energy efficiency and safety, it is recommended to set the temperature between 55°C and 60°C (130°F - 140°F) to prevent bacterial growth while minimizing scalding risk and energy consumption.
Funcionament normal
The water heater will automatically maintain the set water temperature. The heating element will cycle on and off as needed.
The "fast heating" feature ensures quick recovery of hot water supply. The "low oxygen safety shut-off" provides an additional layer of safety.
Manteniment i cura
Regular maintenance ensures the longevity and efficient operation of your Atlantic Cube water heater. Always disconnect the power supply before performing any maintenance.
Inspecció anual
- It is recommended to have a qualified professional inspect the water heater annually.
- This inspection should include checking the anode rod (if replaceable, to prevent corrosion), inspecting the safety valve, and flushing the tank to remove sediment buildup.
Descalcificació
Depending on water hardness in your area, mineral deposits (scale) can build up inside the tank and on the heating element. This can reduce efficiency and lifespan.
- Descaling should be performed by a qualified technician.
- The copper heating element with O'PRO system is designed to extend the appliance's lifespan by reducing corrosion and scale buildup.
Neteja exterior
- Netegeu l'exterior de l'escalfador d'aigua amb un drap suau i sec.amp tela.
- Do not use abrasive cleaners or solvents, as these can damage the ceramic finish.
Draining the Water Heater (for extended absence or freezing temperatures)
- Desconnecteu el subministrament elèctric de l'escalfador d'aigua.
- Close the cold water supply valve to the water heater.
- Open a hot water tap in your home to release pressure.
- Connecteu una mànega a la vàlvula de drenatge a la part inferior de l'escalfador d'aigua i dirigiu-la a un desguàs adequat.
- Open the drain valve and allow the tank to empty completely.
- Un cop buidat, tanqueu la vàlvula de desguàs i l'aixeta d'aigua calenta.
Guia de resolució de problemes
This section addresses common issues you might encounter. For problems not listed here or if solutions do not work, contact a qualified technician.
Sense aigua calenta
- Comproveu la font d'alimentació: Ensure the circuit breaker for the water heater is ON.
- Configuració del termòstat: Verifiqueu que el selector de temperatura estigui ajustat a la temperatura desitjada.
- Tall tèrmic: The automatic thermal protection may have tripped. This usually requires a technician to reset and diagnose the cause.
- Heating Element Failure: The heating element may have failed and requires replacement by a qualified technician.
Aigua calenta insuficient
- Configuració de la temperatura: Increase the temperature setting on the control dial.
- High Demand: Excessive hot water usage may temporarily deplete the tank. Allow time for recovery.
- Sediment Buildup: Sediment in the tank can reduce efficiency. Annual flushing is recommended.
- Partially Failed Element: One part of a dual element (if applicable) might have failed. Requires professional inspection.
Fuites
- Punts de connexió: Check all plumbing connections for tightness. Tighten if necessary.
- Vàlvula de seguretat: The safety valve may discharge small amounts of water during heating due to thermal expansion. This is normal. If continuous or excessive, check water pressure or valve function.
- Tank Leak: A leak from the tank itself indicates a serious issue and usually requires replacement of the unit. Contact a professional immediately.
Sorolls inusuals
- Popping/Rumbling: Often caused by sediment buildup in the tank, which can trap water and cause it to boil. Flushing the tank may resolve this.
- Hissing: May indicate a small leak or water dripping onto a hot surface.
Especificacions tècniques
| Característica | Especificació |
|---|---|
| Marca | Atlàntic |
| Número de model | B09119XSMS |
| Capacitat | 75 litres |
| Potència de sortida | 1500 watts |
| Classe d'eficiència energètica | B |
| Real Heating Time | 3 hores 12 minuts |
| Dimensions (L x H) | 49 cm x 71.2 cm |
| profunditat | 53.2 cm |
| Pes (buit) | 26 kg |
| Material | Acer inoxidable |
| Color | Blanc |
| Acabar | DIAMANT Ceramic (200 µm) |
| Element calefactor | Copper with O'PRO system |
| Font d'alimentació | 230 V / 50 Hz |
| Característiques especials | Fast heating, Low oxygen safety shut-off |
| País de fabricació | França |
Garantia i assistència al client
Informació de la garantia: Specific warranty details for the Atlantic Cube 75L Electric Water Heater are not provided in the available product data. Please refer to the warranty card included with your purchase or contact Atlantic customer service for detailed information regarding warranty coverage and terms.
Disponibilitat de peces de recanvi: Information regarding the availability of spare parts is not provided.
Atenció al client: For technical assistance, service requests, or questions regarding your water heater, please contact Atlantic customer support through their official weblloc web o la informació de contacte que es proporciona a la documentació del producte.





