Introducció
This manual provides comprehensive instructions for the safe and efficient use of your NutriBullet Slow Juicer. Designed to extract deep nutrition from fruits and vegetables, this appliance offers a quiet and effective juicing experience. Please read all instructions carefully before first use and retain this manual for future reference.
Components del producte
The NutriBullet Slow Juicer package includes the following components:
- Base del motor de 150 W
- Juice Bowl with No-Drip Spout
- Grinding Assembly (Auger and Sieve)
- 24-oz Juice Container
- Envàs de polpa
- Screen-Cleaning Brush
- User & Recipe Guide (PDF available online)
Figura 1: Components inclosos
Figure 2: Assembled Juicer with Containers
Configuració
Before first use, wash all removable parts (juice bowl, grinding assembly, juice container, pulp container, and screen-cleaning brush) with warm, soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp tela.
Passos de muntatge:
- Place the motor base on a clean, stable, and dry surface.
- Align the juice bowl with the motor base and twist clockwise until it locks securely into place.
- Insert the grinding assembly (auger and sieve) into the juice bowl, ensuring it sits firmly.
- Place the lid onto the juice bowl, aligning the arrows, and twist clockwise until it clicks into position.
- Position the juice container under the juice spout and the pulp container under the pulp ejection port.
Instruccions de funcionament
Ingredients de preparació:
- Renteu bé totes les fruites i verdures.
- Remove any large seeds, pits, or hard skins (e.g., avocado pits, pineapple skin).
- The wide 3-inch feed chute can accommodate larger produce, reducing the need for extensive pre-cutting. However, for optimal juicing and to prevent clogging, cut ingredients into smaller pieces if they are particularly fibrous or hard.
Figure 3: Wide Feed Chute for Whole Fruits and Vegetables
Procés d'extracció de sucs:
- Ensure the juicer is properly assembled and containers are in place.
- Connecteu el cable d'alimentació a una presa elèctrica amb connexió a terra.
- Press the 'ON' button to start the juicer. The high-torque, low-speed motor operates quietly at 65 RPM.
- Slowly feed prepared ingredients into the feed chute. Use the pusher only if necessary to guide ingredients down. Do not force ingredients.
- Juice will flow into the juice container, and pulp will be ejected into the pulp container.
- The no-drip spout can be closed to prevent drips between glasses or to mix juice within the bowl before dispensing.
- When finished juicing, press the 'OFF' button. Unplug the appliance from the power outlet.
Figure 4: Juicing in Progress
Figure 5: Quiet Operation at 60 RPM
Manteniment i Neteja
Regular cleaning ensures the longevity and optimal performance of your NutriBullet Slow Juicer. It is recommended to clean the juicer immediately after each use.
Passos de neteja:
- Desendolleu l'espremedora de la presa de corrent.
- Disassemble all removable parts: lid, grinding assembly, juice bowl, juice container, and pulp container.
- Rinse all removable parts under running water to remove excess pulp.
- Clean all parts with warm, soapy water. The no-drip spout and other components are designed for easy cleanup.
- Use the provided screen-cleaning brush to thoroughly clean the stainless-steel sieve, ensuring all pulp residue is removed from the mesh.
- All parts except the pusher and auger are dishwasher safe (top rack recommended).
- Netegeu la base del motor amb un anunciamp tela. No submergiu mai la base del motor en aigua ni en cap altre líquid.
- Deixeu que totes les peces s'assequin completament abans de tornar a muntar o emmagatzemar.
Figure 6: Easy-to-Clean No-Drip Spout
Figure 7: Steel-Tipped Auger for Maximum Juice Extraction
Resolució de problemes
If you encounter issues with your NutriBullet Slow Juicer, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'espremedora no s'encén. | No connectat; muntatge incorrecte; apagadatage. | Ensure power cord is securely plugged in. Check that all parts are correctly assembled and locked. Verify power supply. |
| Low juice yield or excessive wet pulp. | Ingredients too soft; sieve clogged; too much pulp buildup. | Ensure ingredients are firm. Clean the sieve thoroughly. Stop juicing and clean out pulp container and sieve if full. |
| El motor s'atura durant el funcionament. | Overload protection activated; hard ingredients jamming auger. | Turn off and unplug the juicer. Remove any jammed ingredients. Allow motor to cool for 15-20 minutes before restarting. Use the 'REV' function to clear blockages. |
| Soroll o vibració forta. | Improper assembly; juicer not on a stable surface. | Check that all components are correctly assembled and locked. Place the juicer on a flat, stable surface. |
If the problem persists after attempting these solutions, please contact NutriBullet Customer Service.
Especificacions
| Característica | Detall |
|---|---|
| Marca | NutriBullet |
| Nom del model | NutriBullet Slow Juicer |
| Número de model | NBJ50300 |
| Color | Negre carbó |
| Dimensions del producte | 7 "P x 6.25" W x 17" H |
| Pes de l'article | 11 lliures |
| Potència màxima | 150 watts |
| Voltage | 120 Volts |
| Font d'alimentació | Elèctric amb cable |
| Capacitat | 710 Milliliters (Juice Container) |
| Material de la fulla | Acer inoxidable, acer aliat |
| Característica especial | Slow Masticating, Quiet Motor, Reverse Function, BPA-Free, Easy to Clean |
| Fabricant | NutriBullet |
| UPC | 818049025768 |
Garantia i Suport
The NutriBullet Slow Juicer comes with a limited warranty. Please refer to the official User & Recipe Guide for detailed warranty terms and conditions. For technical support, replacement parts, or further inquiries, please visit the official NutriBullet weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
You can access the full User Manual and User Guide in PDF format here:
