Introducció
Thank you for choosing MYshade Blackout Cordless Cellular Shades. These shades are designed to provide excellent room darkening, heat insulation, and UV protection, while also offering a child and pet-safe cordless operation. The unique honeycomb structure helps in noise reduction and maintaining room temperature. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your shades.
Contingut del paquet
Abans de començar la instal·lació, comproveu que hi hagi tots els components:
- Cordless Cellular Shade (1 unit)
- Instruccions d'instal·lació (aquest manual)
- Installation Kits (includes brackets, screws, and anchors)
- No Pull Handle (for operating the shade)
Configuració i instal·lació
Installation of your MYshade cellular shades is designed to be straightforward and can be completed in minutes. All necessary accessories are included. Please follow these steps carefully:
1. Prepareu-vos per a la instal·lació
Ensure you have the correct tools: a drill, screwdriver, measuring tape, and pencil. Determine whether you will be performing an inside mount (within the window frame) or an outside mount (outside the window frame).
2. Munteu els suports
Mark the positions for your mounting brackets. For inside mounts, ensure the brackets are level and spaced appropriately to support the shade's width. For outside mounts, position them above the window frame. Secure the brackets using the provided screws and anchors.
3. Instal·leu l'ombra
Align the headrail of the cellular shade with the installed brackets. Push the shade firmly upwards until it clicks securely into place. Ensure both ends of the headrail are properly seated in the brackets.
4. Attach the Pull Handle
Locate the clear plastic pull handle. Attach it to the bottom rail of the shade. This handle provides a comfortable grip for raising and lowering the shade.
Guia de vídeo d'instal·lació
For a visual guide on the installation process, please watch the official product video below:
Instruccions de funcionament
Your MYshade cellular shade features a cordless design for easy and safe operation. To control the light in your room, simply lift up or pull down the shade from the bottom rail using the attached handle. The shade will stay at any position you stop it.
- Per baixar l'ombra: Gently pull down on the bottom rail or the pull handle.
- Per aixecar l'ombra: Gently push up on the bottom rail or the pull handle.
- The internal spring-loaded mechanism will hold the shade securely in place at your desired height.
Manteniment
Proper care will ensure the longevity and appearance of your cellular shades. The environmentally friendly non-woven fabrics are designed to resist peeling, cracking, and color changing even after years of sun exposure.
- Pols: Regularly dust the shades using a soft cloth or a feather duster.
- Neteja de punts: Per a taques petites, feu servir l'anunciamp cloth with mild soap and water. Gently blot the affected area. Avoid harsh chemicals or excessive scrubbing.
- Aspirar: A hand vacuum cleaner with a soft brush attachment can be used for deeper cleaning to remove accumulated dust from the honeycomb cells.
Resolució de problemes
If you encounter any issues with your MYshade cellular shades, please refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Shade does not stay up or down. | Internal spring mechanism needs adjustment or is jammed. | Fully lower the shade, then quickly raise it all the way to the top. Repeat this motion several times to reset the spring mechanism. Ensure no fabric is caught or bunched. |
| Shade is crooked or uneven. | Improper installation or uneven tension. | Check that the mounting brackets are level and securely installed. Gently adjust the shade by pulling down on the higher side to even out the tension. |
| Difficulty raising or lowering the shade. | Obstrucció o problema del mecanisme intern. | Ensure there are no obstructions in the window frame. Verify the pull handle is securely attached. If the issue persists, try resetting the mechanism as described above. |
Especificacions
| Característica | Detall |
|---|---|
| Material | 100% polièster |
| Color | Blanc |
| Opacitat | Apagada |
| Mida (segons el producte) | 24 cm d'amplada x 50 cm d'alçada |
| Mode d'operació | Manual (sense fil) |
| Característiques especials | Honeycomb Cellular Design, Noise Reduction, Privacy Protection, Thermal Insulation, UV Protection |
| Pes de l'article | 2 lliures |
| Tipus de muntatge | Muntatge interior, Muntatge exterior |
| Cura del producte | Dusting, Spot Cleaning |
| Fabricant | MYshade |
Garantia i Suport
For specific warranty details and support inquiries, please refer to the documentation included with your purchase or visit the official MYshade weblloc. També podeu visitar el MYshade Store on Amazon per a més informació i opcions de contacte.
