Makita HR3001CK 1-3/16-inch Rotary Hammer

1. Producte acabatview

The Makita HR3001CK 1-3/16-inch Rotary Hammer is engineered for high performance and power, designed to tackle demanding applications in concrete, wood, and metal. Its robust 7.5 Amp motor delivers 2 ft.lbs. of impact energy, ensuring efficient operation across various tasks. The tool features a versatile 3-mode operation, allowing users to switch between 'rotation only', 'hammering with rotation', and 'hammering only' modes, adapting to diverse job requirements. The L-shaped body design enhances precision by bringing the operator closer to the work surface, while a vibration-absorbing rear handle and soft rubber grip prioritize user comfort during extended use. Safety is paramount, with a torque-limiting clutch that automatically disengages gears to prevent damage if the bit binds. The SDS-PLUS bit system facilitates quick, tool-less bit changes and ensures maximum impact energy transfer.

Figure 1: Makita HR3001CK Rotary Hammer with side handle and depth gauge.

2. Informació de seguretat

Advertències generals de seguretat d'eines elèctriques

• Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. Les zones desordenades o fosques poden provocar accidents. No utilitzeu eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables. Les eines elèctriques creen espurnes que poden encendre la pols o els fums. Mantingueu els nens i els vianants allunyats mentre feu servir una eina elèctrica. Les distraccions poden fer que perdeu el control.
• Seguretat elèctrica: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• Seguretat personal: Always wear eye protection. Use appropriate personal protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source, picking up or carrying the tool.

Rotary Hammer Specific Safety

• Porteu protectors auditius. L'exposició al soroll pot causar pèrdua auditiva.
• Feu servir les nanses auxiliars que s'inclouen amb l'eina. La pèrdua de control pot provocar lesions personals.
• Agafeu l'eina elèctrica per superfícies d'agafada aïllades quan realitzeu una operació on l'accessori de tall pugui entrar en contacte amb cables ocults o amb el seu propi cable. L'accessori de tall que entra en contacte amb un cable "content" pot fer que les parts metàl·liques exposades de l'eina elèctrica estiguin "activas" i podria provocar una descàrrega elèctrica a l'operador.
• Assegureu-vos sempre de tenir un peu ferm. Assegureu-vos que no hi hagi ningú per sota quan utilitzeu l'eina en llocs alts.
• The bit may become hot during operation. Avoid direct contact with the bit after use.

3. Components i què inclou

Your Makita HR3001CK Rotary Hammer comes with the following components:

• Makita HR3001CK Rotary Hammer
• Side Handle (127220-2)
• Depth Gauge (331886-4)
• Caixa d'eines

Figure 2: The Makita HR3001CK Rotary Hammer and its accessories stored in the included tool case.

4. Configuració

Attaching the Side Handle and Depth Gauge

1. Afloixeu la nansa lateral girant-la en sentit antihorari.
2. Slide the side handle onto the tool's barrel until it reaches the desired position.
3. Insert the depth gauge into the hole on the side handle. Adjust the depth gauge to the required drilling depth.
4. Tighten the side handle by turning it clockwise to secure both the handle and the depth gauge.

Figure 3: The rotary hammer with the side handle and depth gauge correctly installed.

Installing SDS-PLUS Bits

1. Clean the bit shank and apply a small amount of grease to the bit shank.
2. Pull back the tool holder cover and insert the bit into the chuck.
3. Rotate the bit slightly until it locks into place. Release the tool holder cover.
4. Pull the bit to ensure it is securely locked. A small amount of play is normal for SDS-PLUS bits.

Figure 4: Demonstrating the installation of an SDS-PLUS bit into the chuck.

5. Instruccions de funcionament

Selecció del mode de funcionament

The HR3001CK offers three operating modes, selected via the recessed hammer function selector located under the gear housing:

• Rotation Only: Per perforar fusta, metall o plàstic sense necessitat de martellejar.
• Hammering with Rotation: For drilling in concrete, masonry, and other hard materials.
• Només martelleig: For chipping, chiseling, or demolition work.

To change the mode, rotate the selector to the desired icon. Ensure the tool is unplugged or switched off before changing modes to prevent accidental operation.

Figure 5: The mode selector dial, allowing selection between rotation, hammer drilling, and hammering only.

Inici i aturada de l'eina

• Per engegar l'eina, premeu el gatillo.
• Per aturar l'eina, deixeu anar l'interruptor del disparador.
• The tool features a variable speed trigger, allowing you to control the speed by varying the pressure on the switch.

Bit Angle Adjustment (Hammering Only Mode)

When in 'hammering only' mode, the bit angle can be adjusted to optimize the working angle for chiseling applications. Consult the tool's markings for specific adjustment points.

6. Manteniment

Neteja i inspecció generals

• Always unplug the tool before performing any maintenance.
• Netegeu regularment les obertures de ventilació per evitar el sobreescalfament. Feu servir un raspall suau o aire comprimit.
• Inspect the power cord for any damage. Replace immediately if damaged.
• Comproveu que tots els cargols i elements de fixació estiguin ben ajustats. Estrenyeu qualsevol component solt.

Substitució de raspalls de carbó

The motor employs carbon brushes which are consumable parts. When they wear down, the motor will stop automatically. Replace both carbon brushes at the same time. To replace, remove the brush holder caps using a screwdriver, pull out the worn carbon brushes, insert new ones, and securely replace the caps.

Lubricació

The SDS-PLUS chuck requires periodic lubrication to ensure smooth bit insertion and removal, and to maintain optimal impact performance. Apply a small amount of SDS-PLUS grease to the bit shank before insertion.

7. Solució De Problemes

• L'eina no s'inicia: Check if the power cord is securely plugged in. Ensure the trigger switch is fully depressed. Verify that the carbon brushes are not worn out.
• Bit does not rotate or hammer: Ensure the mode selector is set correctly for the desired operation. Check if the bit is properly inserted and locked in the chuck. If the bit binds frequently, the torque limiting clutch may be engaging; reduce pressure or use a sharper bit.
• Vibració o soroll excessiu: This could indicate a worn bit, loose components, or internal issues. Stop using the tool and have it inspected by a qualified service technician.
• Sobreescalfament: Ensure ventilation openings are clear. Avoid continuous heavy-duty operation without breaks. Reduce load if possible.

8. Especificacions

9. Vídeos de productes

Makita M8701ZB Unboxing Video

10. Garantia i Suport

Informació de la garantia

Makita power tools are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your purchase receipt as proof of purchase for warranty claims.

Atenció al client

Per a assistència tècnica, servei tècnic o per localitzar un centre de servei autoritzat, visiteu el lloc web oficial de Makita. website or contact Makita customer service directly. Contact information can typically be found in the warranty documentation or on the Makita weblloc.