1. Introducció
Thank you for choosing the Duux Bright Smart Air Purifier DXPU06. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your air purifier. Please read this manual thoroughly before use and retain it for future reference.
Image: Duux Bright Smart Air Purifier DXPU06 shown with its accompanying smartphone application interface.
2. Instruccions de seguretat
- Assegureu-vos que la font d'alimentació voltagCoincideix amb les especificacions de l'aparell.
- No feu servir l'aparell amb un cable o un endoll danyats.
- Mantingueu l'aparell allunyat de l'aigua i altres líquids.
- Do not block the air inlets or outlets. Maintain adequate clearance around the unit.
- Aquest aparell només és per a ús interior.
- Desendolleu l'aparell abans de netejar-lo o fer-ne cap manteniment.
- No introduïu objectes a les obertures de l'aparell.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Duux Bright Smart Air Purifier DXPU06
- HEPA H13 + Active Carbon Filter (pre-installed or separately packaged)
- Adaptador d'alimentació
- Manual d'usuari
4. Producte acabatview
4.1 Components
The Duux Bright Smart Air Purifier DXPU06 consists of the following main components:
- Entrada d’aire: Located at the lower section, where air is drawn into the unit.
- Compartiment del filtre: Houses the HEPA H13 and active carbon filter.
- Sortida d'aire: Located at the top, where purified air is released.
- Tauler de control: Touch-sensitive interface on the top for manual operation.
- PM2.5 Sensor: Detects particulate matter in the air.
4.2 Tauler de control
Imatge: Detallada view of the top control panel, showing power, fan speed, timer, Wi-Fi, and mode buttons.
The control panel features touch buttons for various functions:
- Botó d'encesa: Encén o apaga la unitat.
- Botó de velocitat del ventilador: Cycles through fan speeds (1, 2, 3) and Night mode.
- Botó del temporitzador: Sets the operating timer (2h, 4h, 6h, 8h).
- Botó Wi-Fi: Initiates Wi-Fi pairing mode.
- Botó de mode: Activates Auto mode or Ionizer function.
- Indicador de qualitat de l'aire: Displays current air quality status.
5. Configuració
5.1 Instal·lació del filtre
- Carefully invert the air purifier.
- Twist and remove the bottom cover.
- Remove the filter, which is typically wrapped in plastic film for protection during shipping.
- Unwrap the plastic film from the filter.
- Insert the unwrapped filter back into the unit.
- Reattach the bottom cover by twisting it securely into place.
5.2 Col·locació
Place the air purifier on a flat, stable surface. Ensure there is at least 20 cm of clear space around all sides and above the unit for optimal airflow. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
Image: The air purifier positioned in a living space, demonstrating suitable placement.
5.3 Connexió d'alimentació
Connect the power adapter to the power inlet on the back of the air purifier, then plug the adapter into a suitable electrical outlet (240V).
5.4 App Installation and Wi-Fi Pairing
The Duux Bright Smart Air Purifier can be controlled via the free Duux smartphone app. Follow these steps to connect:
- Download the 'Duux' app from your smartphone's app store (iOS or Android).
- Creeu un compte o inicieu sessió si ja en teniu un.
- On the air purifier's control panel, press and hold the Wi-Fi button for approximately 5 seconds until the Wi-Fi indicator starts blinking.
- Follow the in-app instructions to add your device. You may need to enter your Wi-Fi network password.
- Once connected, the Wi-Fi indicator on the air purifier will become solid.
6. Instruccions de funcionament
6.1 Encès/Apagat
Premeu el botó Botó d'engegada on the control panel or use the app to turn the unit on or off.
6.2 Ajust de la velocitat del ventilador
Premeu el botó Botó de velocitat del ventilador repeatedly to cycle through the three fan speeds (1, 2, 3) and Night mode. Speed 1 is the quietest, while Speed 3 provides maximum purification.
6.3 Funció de temporitzador
Premeu el botó Botó del temporitzador to set the operating duration to 2, 4, 6, or 8 hours. The unit will automatically turn off after the selected time.
6.4 Auto Mode and Ionizer
Premeu el botó Botó de mode to activate Auto mode. In Auto mode, the PM2.5 sensor continuously monitors air quality and adjusts the fan speed automatically. Press the Mode Button again to activate the built-in ionizer, which helps to further purify the air by releasing ions negatius.
6.5 Indicador de qualitat de l'aire
The air quality indicator on the control panel changes color to reflect the current air quality detected by the PM2.5 sensor:
- Verd: Excel·lent qualitat de l'aire
- groc: Bona qualitat de l'aire
- Taronja: Qualitat de l'aire moderada
- Vermell: Mala qualitat de l'aire
6.6 Control d'aplicacions
Once connected to the Duux app, you can remotely control all functions of the air purifier, monitor real-time air quality, and view dades històriques.
7. Manteniment
7.1 Substitució del filtre
The HEPA H13 + active carbon filter should be replaced approximately every 4 to 6 months, depending on usage and air quality. A filter replacement indicator light on the control panel will illuminate when replacement is due.
- Desendolleu el purificador d'aire de la presa de corrent.
- Invert the unit and remove the bottom cover.
- Traieu el filtre vell i llenceu-lo correctament.
- Insert a new, unwrapped Duux replacement filter (available from Duux retailers).
- Torneu a col·locar la coberta inferior.
- Plug in the unit and reset the filter indicator by pressing and holding the appropriate button (refer to the app or control panel for specific instructions).
7.2 Neteja de l'exterior
Netegeu l'exterior del purificador d'aire amb un damp drap. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que la unitat estigui desendollada abans de netejar-la.
7.3 Neteja del sensor
Periodically clean the PM2.5 sensor opening on the back of the unit with a soft brush or cotton swab to ensure accurate readings.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén | No hi ha font d'alimentació; el cable d'alimentació no està connectat correctament | Comproveu la presa de corrent; assegureu-vos que el cable d'alimentació estigui ben connectat |
| Mala purificació de l'aire | Filter is dirty or expired; Air inlets/outlets blocked | Replace filter; Clear any obstructions |
| La connexió Wi-Fi falla | Incorrect Wi-Fi password; Router too far; App issue | Verify password; Move unit closer to router; Restart app/unit; Ensure 2.4GHz Wi-Fi network is used |
| Soroll inusual | Foreign object inside; Unit not on a flat surface; Filter not installed correctly | Unplug and check for obstructions; Place on a stable surface; Reinstall filter |
| Air quality indicator inaccurate | PM2.5 sensor is dirty | Clean the PM2.5 sensor opening |
9. Especificacions
Image: Dimensions of the Duux Bright Smart Air Purifier DXPU06.
| Característica | Especificació |
|---|---|
| Marca | Duux |
| Número de model | DXPU06 |
| Color | Negre |
| Dimensions (P x A x A) | 22 cm x 22 cm x 36 cm |
| Pes | 3.5 quilos |
| Voltage | 240 Volts |
| Nombre de velocitats | 3 |
| Nivell de soroll | 32 decibels (mínim) |
| CADR (taxa d’enviament d’aire net) | 200 m³/h |
| Àrea d'habitació adequada | Fins a 27 m² |
| Mètode de control | App, Touch Panel |
| Tipus de filtre | Pre-filter, HEPA H13, Active Carbon |
| Característiques especials | PM2.5 sensor & air quality display, Built-in ionizer, Smart-compatible with Duux app |
10. Garantia i Suport
The Duux Bright Smart Air Purifier DXPU06 comes with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Duux website. For technical support, spare parts, or service inquiries, please contact Duux customer service through their official channels.
