Introducció
Thank you for choosing the Duronic MF500 Automatic Electric Milk Frother. This appliance is designed to help you create a variety of delicious milk-based beverages, from frothy cappuccinos and lattes to warm hot chocolates and cold foam for iced coffees. Please read this manual carefully before use to ensure safe and optimal operation.
Image: The Duronic MF500 Milk Frother preparing various hot and cold beverages.
Configuració
1. Desembalatge i inspecció
- Traieu amb cura tots els components de l'embalatge.
- Verify that all parts are present: main base unit, stainless steel jug, transparent lid, frothing whisk, and heating whisk.
- Inspect the appliance for any signs of damage. Do not use if damaged.
2. Neteja inicial
- Before first use, wash the stainless steel jug, lid, and whisks with warm, soapy water. Rinse thoroughly and dry completely.
- Wipe the exterior of the main base unit with a damp tela. No submergiu la unitat base en aigua.
3. Identificació de components
Image: Diagram illustrating the dimensions and key components of the Duronic MF500.
The appliance consists of a main power base and a removable stainless steel jug. The jug has a handle and a transparent lid. Two types of whisks are provided: one for frothing and one for heating milk without frothing. These whisks can be stored conveniently under the base unit.
Instruccions de funcionament
1. Choosing the Whisk
- Batedora d'escuma: Use the whisk with the coil for creating hot or cold milk foam.
- Heating Whisk: Use the whisk without the coil for heating milk without frothing (e.g., for hot chocolate).
Place the desired whisk securely onto the shaft at the bottom of the stainless steel jug.
Image: Interior of the jug showing maximum fill lines for frothing (260ml) and heating (500ml).
2. Filling Milk
- Pour milk into the stainless steel jug. Observe the internal MAX fill lines:
- Per espumant (hot or cold foam), do not exceed the lower MAX line (approximately 260 ml) to prevent overflow.
- Per escalfar la llet (without frothing), do not exceed the upper MAX line (approximately 500 ml).
- For best results, use cold, fresh milk. Plant-based or semi-skimmed milk is recommended for optimal frothing.
3. Selecting Mode and Operation
- Place the jug onto the power base. Ensure it is seated correctly.
- Place the transparent lid on the jug.
- Press the single control button on the front of the base unit to cycle through the modes:
- Short press (once): Hot frothing (red indicator light, approx. 65°C). Ideal for cappuccinos and lattes.
- Short press (twice): Hot milk (blue indicator light, approx. 80°C). Ideal for hot chocolate.
- Premsa llarga (aproximadament 2 segons): Cold frothing (blue indicator light flashes). Ideal for iced coffees.
- The appliance will automatically stop when the selected temperature is reached or the cycle is complete.
Image: The control panel with indicator lights for hot frothing, hot milk, and cold frothing, along with approximate preparation times.
Imatge: Examples of beverages prepared with the frother, such as cappuccino and hot chocolate.
Image: Visual representation of the frother's hot and cold temperature capabilities.
Manteniment i Neteja
1. Cleaning the Jug and Whisks
- Always unplug the base unit before cleaning.
- Immediately after each use, remove the jug from the base.
- Wash the stainless steel jug, lid, and whisks with warm, soapy water. The non-porous design of the stainless steel helps prevent odors and bacteria.
- Rinse thoroughly under running water and dry completely with a soft cloth.
- Do not use abrasive cleaners, metal scouring pads, or harsh detergents, as these can damage the surface.
Image: Hand-washing the removable stainless steel jug for easy cleaning.
2. Cleaning the Base Unit
- Netegeu l'exterior de la unitat base amb un drap suau i sec.amp tela.
- No submergiu mai la unitat base en aigua o cap altre líquid.
- Ensure the power connector area is dry before plugging in.
3. Emmagatzematge
- Guardeu l'aparell en un lloc net i sec quan no l'utilitzeu.
- The whisks can be stored conveniently under the base unit to prevent loss.
Resolució de problemes
If you encounter issues with your Duronic MF500, please refer to the following common problems and solutions:
- L'aparell no s'encén:
- Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent que funcioni.
- Comproveu si hi ha correnttage o un interruptor automàtic saltat.
- Milk is not frothing or heating properly:
- Verify that the correct whisk is installed for your desired function (frothing whisk for foam, heating whisk for hot milk).
- Ensure the milk level is within the specified MAX lines for frothing (260 ml) or heating (500 ml). Overfilling or underfilling can affect performance.
- Use cold, fresh milk. Different types of milk (e.g., full-fat, skimmed, plant-based) can produce varying results. Semi-skimmed or plant-based milks often yield the best foam.
- Ensure the jug is clean and free from residue, which can interfere with whisk rotation.
- Milk overflows during operation:
- You may have exceeded the maximum fill line for frothing (260 ml). Always adhere to the indicated fill levels.
- Soroll inusual durant el funcionament:
- Ensure the whisk is properly seated on the shaft at the bottom of the jug.
- Check for any foreign objects in the jug.
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
Especificacions
| Característica | Especificació |
|---|---|
| Marca | Duronic |
| Número de model | MF500 |
| Color | Black (MF500 BK) |
| Dimensions del producte (L x A x A) | 17 x 0.03 x 24 cm (Base: 17L x 24H cm) |
| Capacitat | 500 Milliliters (Max for heating), 260 Milliliters (Max for frothing) |
| Poder | 460 – 500 watts |
| Material | Stainless Steel (Jug) |
| Pes de l'article | 1.75 quilos |
| Components inclosos | Lid, User Manual, Jug, Power Base, 2 Whisks (Frothing, Heating) |
| Configuració de la temperatura | Cold, 65°C, 80°C |
| Instruccions de cura | Hand wash (jug), Wipe clean (base) |
Informació de la garantia
Specific warranty details for the Duronic MF500 Milk Frother are typically provided with the product packaging or can be found on the official Duronic weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Atenció al client
For further assistance, technical support, or inquiries regarding your Duronic MF500 Milk Frother, please visit the official Duronic weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. La informació de contacte normalment es pot trobar a l'embalatge del producte o al fabricant. weblloc.
