PULACO Internal Aquarium Filter PL-05

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your PULACO Internal Aquarium Filter, Model PL-05. This filter is designed for aquatic environments ranging from 3 to 20 gallons, suitable for various aquatic and semi-aquatic pets including turtles, reptiles, amphibians, frogs, cichlids, newts, and fish.

Please read these instructions carefully before use and retain them for future reference to ensure optimal performance and longevity of your filter.

Figura 1: PULACO Internal Aquarium Filter application for various aquatic habitats.

2. Instruccions de seguretat

• Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment, instal·lació o neteja.
• Ensure the filter is fully submerged in water during operation to prevent damage to the motor.
• No feu funcionar el filtre si el cable d'alimentació o l'endoll estan danyats.
• This appliance is for indoor use only and should not be used in outdoor environments.
• Mantenir fora de l'abast dels nens.
• Assegureu-vos que el voltage and frequency of your power supply match the specifications on the filter label.

3. Contingut del paquet

Carefully unpack all components and check against the list below. If any parts are missing or damaged, please contact customer support.

Figura 2: Explotat view of the PULACO Internal Aquarium Filter components with numbered parts for identification.

1. Coberta del filtre
2. Filter Plate (with media)
3. Entrada d'aigua
4. Cos del filtre
5. Penjador
6. Inlet Sponge
7. Endoll
8. Inlet Basket
9. Bomba d'aigua
10. Sortida d'aigua

4. Instruccions de configuració

1. Assemble the Filter: Ensure the filter plate (2) is correctly seated inside the filter body (4). Attach the water pump (9) to the bottom of the filter body. Secure the inlet basket (8) and inlet sponge (6) to the water pump's intake. Place the filter cover (1) on top.
2. Attach Hanger/Suction Cups: Attach the hanger (5) to the filter body if you plan to hang it on the tank rim. Alternatively, use the integrated suction cups on the back of the filter body to secure it to the inside wall of your aquarium.


Figura 3: Filter hanger attachment.



Figura 4: Filter suction cups for tank wall mounting.



Figura 5: Filter inlet sponge.

3. Position in Tank: Place the filter inside your aquarium, ensuring it is fully submerged. The minimum water line for proper operation is 1.9 inches (4.8 cm). This low water line capability makes it suitable for amptancs hibians.
4. Connectar l'alimentació: Once the filter is securely placed and fully submerged, connect the power plug (7) to a suitable electrical outlet.

5. Instruccions de funcionament

After connecting the power, the filter will begin to operate. The 5W water pump provides a stable flow of 132 GPH (gallons per hour), ensuring efficient water circulation and filtration. The design promotes quiet operation, suitable for both freshwater and saltwater environments.

The waterfall design of the water outlet aids in water aeration, contributing to a healthier aquatic environment.

6. Manteniment

Regular maintenance is crucial for the efficient operation and longevity of your PULACO filter. It is recommended to clean the filter every 2 weeks to maintain standard filtration efficiency.

Procediment de neteja:

1. Desconnecteu l'alimentació: Always unplug the filter from the power outlet before cleaning.
2. Remove Filter from Tank: Carefully remove the filter from the aquarium.
3. Desmuntar el filtre: Remove the filter cover, then carefully extract the filter plate and inlet sponge.
4. Neteja del medi filtrant: The filter utilizes a 3-layer filtration plate.


Figura 6: Diagram illustrating the 3-layer filtration plate components.

• Bio-Cotton Layers: Rinse the bio-cotton layers (top and bottom) thoroughly under clean water to remove trapped debris.
• Micro Activated Carbon: The activated carbon layer helps to clean water smell. Rinse it gently. Activated carbon has a limited lifespan and should be replaced periodically (e.g., monthly) for optimal odor removal.
5. Clean Inlet Sponge: Rinse the inlet sponge to remove any accumulated particles.
6. Clean Pump Impeller: Periodically, remove the water pump and clean the impeller to ensure smooth operation and prevent blockages.
7. Reassemble and Reinstall: Reassemble all parts in reverse order and place the filter back into the aquarium, ensuring it is fully submerged before reconnecting power.

7. Solució De Problemes

8. Especificacions

Figura 7: Dimensions of the PULACO Internal Aquarium Filter.

• Model: PL-05
• Potència: 5W
• Caudal: 132 GPH (galons per hora)
• Minimum Water Line: 1.9 polzades (4.8 cm)
• Suitable Tank Size: 3 to 20 Gallons (15-40 inches)
• Dimensions del producte: 8.89 x 7.87 x 19.81 cm (3.5 x 3.1 x 7.8 polzades)
• Pes del producte: 349 g
• Color: Negre
• Tipus de filtració: Mechanical (Bio-Cotton) and Chemical (Activated Carbon)

9. Garantia i Suport

PULACO stands behind the quality and durability of its products. This aquarium filter comes with a lifetime warranty, ensuring peace of mind for your purchase.

For any questions, concerns, or assistance, please contact our professional after-sales service. We offer 24-hour support to address your needs promptly.