1. Muntatge i muntatge
This section provides detailed instructions for assembling your Magnus Electric Dual Motor Stand Up Desk. Please follow these steps carefully to ensure proper setup and functionality.
1.1 Desembalatge i identificació de components
Carefully unpack all components from the packaging. Verify that all parts are present according to the packing list. Lay out all parts on a clean, flat surface to begin assembly.
1.2 Passos de muntatge
- Muntar els peus: Attach the feet to the lifting columns using the provided screws. Ensure they are securely fastened.
- Assemble the Cable Management Tray: Secure the cable management tray to the crossbar of the desk frame. This helps organize power cords and other cables.
- Assemble the Lifting Columns: Connect the lifting columns to the main frame. Ensure all connections are firm.
- Assemble the Side Brackets: Attach the side brackets to the top of the lifting columns. These will support the desktop.
- Connect Cords and Attach the Control Box: Connect the control pad and lifting columns to the control box. Then, connect the power cord to the control box. Securely attach the control box to the underside of the desk frame.
- Munta l'escriptori: Carefully place your desktop onto the assembled frame, aligning it with the pre-drilled holes on the side brackets. Secure the desktop using the provided screws.
- Attach the Control Pad: Mount the control pad to the underside of the desktop in a convenient location for operation.
Figure 1: Desk frame dimensions and weight capacity. The frame supports widths from 48" to 72" and heights from 23.5" to 48", with a maximum load of 275 lbs.
Figure 2: Visual guide for assembling the desk frame components.
1.3 Guia de vídeo de muntatge
For a visual walkthrough of the assembly process, please refer to the official installation animation below:
Video 1: Magnus Hilo Sit Stand Desk Base Assembly. This video demonstrates the step-by-step installation process for the desk base.
2. Funcionament
The Magnus Electric Dual Motor Stand Up Desk features an intuitive LED handset for easy height adjustment and personalized settings.
2.1 Ajust de l'alçada de l'escriptori
- Botons amunt / avall: Utilitza el Up (▲) i Avall (▼) arrow buttons on the control pad to smoothly raise or lower the desk to your desired height. The current height is displayed on the LED screen.
- The desk features a dual-motor system for stable and quiet height transitions.
Figure 3: LED Handset for height adjustment and memory presets.
2.2 Preajustos de memòria
The control pad includes three memory presets (1, 2, 3) to save your preferred sitting and standing heights.
- Desar un valor predefinit: Adjust the desk to your desired height. Press the M button, then press one of the number buttons (1, 2, or 3) within 3 seconds. The height is now saved to that preset.
- Recuperació d'una configuració predefinida: Press the corresponding number button (1, 2, or 3) to automatically move the desk to the saved height.
2.3 Sedentary Alert
The desk includes a sedentary alert feature to remind you to change positions. Consult your desk's specific manual for instructions on how to activate and customize this feature.
Figure 4: The desk supports ergonomic sitting and standing positions.
3. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Magnus Electric Dual Motor Stand Up Desk.
- Neteja: Utilitzeu un suau, damp cloth to clean the desk surface and frame. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Gestió de cables: Periodically check and organize cables using the integrated cable management tray to prevent tangles and damage.
- Estancament del cargol: Amb el temps, els cargols es poden afluixar. Reviseu i estrenyeu periòdicament tots els cargols del muntatge per mantenir l'estabilitat.
- Inspecció de motors: Ensure the motors and lifting columns are free from obstructions. Do not attempt to lubricate or disassemble motor components.
4. Solució De Problemes
Si teniu algun problema amb el vostre escriptori, consulteu els passos habituals següents per resoldre problemes:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escriptori no es mou | Power cable disconnected, control box issue, motor error. | Check all power connections. Ensure the control box is properly connected. Unplug the desk for 10 seconds and plug it back in to reset. |
| Ajust d'alçada desigual | Obstruction, uneven load, motor synchronization issue. | Remove any obstructions. Ensure weight is evenly distributed. Perform a reset procedure (refer to specific control pad instructions if available). |
| Soroll durant el funcionament | Loose screws, minor friction. | Check and tighten all assembly screws. Minor operational noise is normal for motorized desks. |
| Els preajustaments de memòria no funcionen | Procediment de desament incorrecte. | Ensure you press 'M' then the number button within 3 seconds to save. Repeat the saving process. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
5. Especificacions
Below are the technical specifications for the Magnus Electric Dual Motor Stand Up Desk (Model BASE03P):
| Característica | Detall |
|---|---|
| Marca | Magnus |
| Número de model | BASE03P |
| Disseny d'escriptori | Escriptori |
| Dimensions del producte (P x A x A) | 24"D x 48"W x 23.5"H (Adjustable) |
| Interval d'alçada ajustable | 23.5" a 48" |
| Rang d'amplada ajustable | 48" a 72" |
| Work Surface Depth Options | 24" i 30" |
| Color | Platinum (Frame) |
| Estil | Modern |
| Material base | Acer d'aliatge |
| Tipus de material superior | Alloy Steel (Frame, desktop not included) |
| Tipus d'acabat | Acer |
| Característica especial | Electric, Dual Motor, 3 Lifting Stages, LED Handset with 3 Memory Presets & Sedentary Alert |
| Capacitat de càrrega | Fins a 275 lliures |
| Muntatge requerit | Sí |
6. Garantia i assistència
Magnus is committed to providing high-quality products. For specific warranty information regarding your Electric Dual Motor Stand Up Desk, please refer to the documentation included with your purchase or visit the official Magnus weblloc.
6.1 Atenció al client
If you have any questions, require assistance with assembly, operation, or troubleshooting, please contact Magnus customer support:
- Assistència en línia: Visit the Magnus weblloc web per a preguntes freqüents i recursos de suport.
- Correu electrònic: [Inseriu aquí el correu electrònic d'atenció al client]
- Telèfon: [Inseriu aquí el número de telèfon d'atenció al client]
Please have your model number (BASE03P) and purchase date available when contacting support.
